• Journal of the Korean Society of Industry Convergence
• /
• v.13 no.4
• /
• pp.205-209
• /
• 2010

Even the domestically small-and medium-sized companies progressed development in the monitoring equipment of inspecting run out in steel wheel aiming to supply and generalize through developing the monitoring equipment for securing quality technology and enhancing quality-test level. Run-Out value in vehicle wheel was measured with Computer & Servo system by using Low-Point marking machine control system, which is this development product. Low-Point value was operated and calculated. It marked by revolving wheel as much as the demanded measurement value based on 1ST harmony curve. Thus, the shipment of inferior product, which occurs in the measurement by the existing worker, could be blocked in advance. In the existing case, 60 sec. was required for inspecting 1 product. However, it came to bring about a rise in production volume through shortening inspection time to 8 seconds and improving workers' operating environment.

• Proceedings of the Korean Reliability Society Conference
• /
• 2000.04a
• /
• pp.123-129
• /
• 2000

SPC is the quality improvement technique of gathering since Motorola of U.S.A. have used SPC technique as a statistical process control method for promoting 6-sigma quality improvement strategy in 1988. In Korea, small and medium-sized enterprises are needed building of a system for statistical production control . In the present study, the methods of building SPC system with a moderate cost using a graphic programs of easy-to-use and high flexibility for small and medium-sized enterprises were inquired. The SPC system which enables statistic marking (maximum, minimum, mean, standard deviation, process capability index) and graph marking (X-Y coordinates and histogram) using LabVIEW 5.0, the graphic program by National Instrument Co., Ltd. was implemented in this study.

• Journal of the Korea Society for Simulation
• /
• v.13 no.4
• /
• pp.31-42
• /
• 2004

GDS (Grating automatic Drawing System), which is an automatic design system of a metal product called grating, is a system that produces various detailed drawings on the basis of information within a Plan Drawing that represents layout of the grating such as locations, shapes, directions, etc. However, automatically produced drawings by GDS do not fully satisfy the standard of the general dimension marking method used among the layout designers. The lack of this standard quality mainly results from the fact that overlapping among dimension markings appear frequently. To solve the overlapping problem we applied the rule-based expert system. The rules are designed based on the expertise of skilled layout designers within the grating production lines.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1855-1858
• /
• 2002

A number of MPLS ATM systems have been proposed to increase the access speed of current routers, which only support the best-effort service. However, the MPLS ATM systems have to support the so-called differential service, which discriminates the applications according to the service class because they do not be satisfied the Internet users who use diverse applications. In this paper, to support this differential service a detailed forwarding procedure based on a LSP control method and an application-based marking algorithm is suggested. The LSP control method establishes several different LSPs for each FEC according to the service class and the application-based marking algorithm chooses a proper differential service depending on the application category. Also, a design scheme of forwarding engine, which can be easily implemented with a minimum modification of existing MPLS ATM systems is proposed. And, the best simulation result of high priority application category is gained when the proposed forwarding algorithm is comparedwithexistingalgorithms.

• Journal of Environmental Science International
• /
• v.8 no.5
• /
• pp.601-605
• /
• 1999

This study has been performed to evaluate mineral water quality by using four parameters [Mg]/[Ca], [Na]/[K], [Mg]+[Ca]/[Na]+[K] and total hardness(as CaCO3 mg/ℓ). The four parameters has been ploted in a general scale and logarithmic scale, respectively. The method of general scale is not applicable for evaluation on several parameters. Therefore, the logarithmic scale is applied instead to settle the problem. The evaluation of the water quality is based on standard sample S, and the results of the 6 domestics and 5 overseas sample evaluation are as follow. At present, evaluation of the water quality on the mineral water can be done by using four parameters calculated from only cation concentration printed on the bottle's marking.

• The KIPS Transactions:PartC
• /
• v.9C no.1
• /
• pp.89-96
• /
• 2002

Handoff is one of the most important factors that ma? degrade the performance of TCP connections in wireless data networks. In this paper, we present a lossless and duplication free handoff scheme called LPM (Last Packet Marking) for improving Cellular If semisoft handoff. LPM signals the safe handoff cue by sending a specially marked packet to mobile hosts. SPM (Semisoft rePly Message) is the only newly introduced control packet. Our performance study shows that LPM achieves lossless packet delivery without duplication and increases TCP throughput significantly.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.6
• /
• pp.32-38
• /
• 2010

Laser material processing technology is adopted in several industry as alternative process which could overcome weakness and problems of present adopted process, especially semiconductor and display industry. In semiconductor industry, laser photo lithography is doing at front-end level, and cutting, drilling, and marking technology for both wafer and EMC mold package is adopted. Laser cleaning and de-flashing are new rising technology. There are 3 kinds of main display industry which use laser technology - TFT LCD, AMOLED, Touch screen. Laser glass cutting, laser marking, laser direct patterning, laser annealing, laser repairing, laser frit sealing are major application in display industry.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.1411-1412
• /
• 2015

Detection of road lanes is an important technology, which is being used in autonomous vehicles from last few years. This method is very helpful and supportive for the drivers to provide them safety and to avoid road accidents. Alot of methods are being used to detect road lane markings. We can categorize them into three major categories: sensor-based, feature-based, and model-based methods. And in this study we give the comprehensive survey on lane marking techniques.

• Proceedings of the Korea Society of Costume Conference
• /
• 2001.10a
• /
• pp.85-85
• /
• 2001

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.113-116
• /
• 2005