• Food Science and Preservation
• /
• v.10 no.2
• /
• pp.154-157
• /
• 2003

To examine the quality changes of three typical fishes under usual storage conditions during marketing, we determined the total bacterial counts and pH values during storage of mackerel, croaker, and saury. Mackerels were stored at 0$^{\circ}C$ and on ice at 19$^{\circ}C$, which is the usual storage condition in a local market and croakers and saury were stored at 0$^{\circ}C$ and 4$^{\circ}C$. Total bacterial counts of mackerel, croaker, and saury were 3,2${\times}$10$^3$, 2.9${\times}$10$^3$, and 2.8 x 10$^4$CFU/g at the time of storage respectively. Total bacterial counts of mackerel stored on ice at 19$^{\circ}C$ increased during storage and reached to 8.4 x 10$\^$6/ CFU/g at day 6, while those stored at 0$^{\circ}C$ decreased up to 2 days of storage and increased to 5.6 ${\times}$ 10$^4$CFU/g. For croaker and saury, total bacterial counts at 0$^{\circ}C$ were 2.5 ${\times}$ 10$\^$5/ and 2.1 x 10$\^$5/ CFU/g at day 6, respectively, while those stored at 4$^{\circ}C$ had 3.6 x 10$\^$6/ and 2.6 ${\times}$ 10$\^$5/ CFU/g. the pH value or mackerel was 5.56 at the time or storage, yet it increased to 6.04. The pH changes of croaker and saury had a similar pattern with that of mackerel, which increased with time of storage. These results suggest that storage of fishes at 0$^{\circ}C$ should be better than those at 4$^{\circ}C$ or on ice at 19$^{\circ}C$ in terms of microbial safety as well as quality and shelf-life of fishes.

• KSBB Journal
• /
• v.23 no.6
• /
• pp.463-469
• /
• 2008

During the last decade, monacolin-K biosynthesized by fermentation of red yeast rice (Monascus strains) was proved to have an efficient cholesterol lowering capability, leading to rapid increase in the market demand for the functional red yeast rice. In this study, the production medium composition and components were optimized on a shake flask scale for monacolin-K production by Monascus pilosus (KCCM 60160). The effect of three different soybean flours on the monacolin-K production were studied in order to replace the nitrogen sources of basic production medium (yeast extract, malt extract and beef extract). Among the several experiments, the production medium with dietary soybean flour to replace a half of yeast extract was very good for monacolin-K production. Plackett-Burman experimental design was used to determine the key factors which are critical to produce the biological products in the fermentation. According to the result of Plackett-Burman experimental design, a second order response surface design was applied using yeast extract, beef extract and $(NH_4)_2SO_4$ as factors. Applying this model, the optimum concentration of the three variables was obtained. The maximum monacolin-K production (369.6 mg/L) predicted by model agrees well with the experimental value (418 mg/L) obtained from the experimental verification at the optimal medium. The yield of monacolin-K was increased by 67% as compared to that obtained with basic production medium in shake flasks.

• KDI Journal of Economic Policy
• /
• v.12 no.2
• /
• pp.51-79
• /
• 1990

Research on technical efficiency, an important dimension of market performance, had received little attention until recently by most industrial organization empiricists, the reason being that traditional microeconomic theory simply assumed away any form of inefficiency in production. Recently, however, an increasing number of research efforts have been conducted to answer questions such as: To what extent do technical ineffciencies exist in the production activities of firms and plants? What are the factors accounting for the level of inefficiency found and those explaining the interindustry difference in technical inefficiency? Are there any significant international differences in the levels of technical efficiency and, if so, how can we reconcile these results with the observed pattern of international trade, etc? As the first in a series of studies on the technical efficiency of Korea's manufacturing industries, this paper attempts to answer some of these questions. Since the estimation of technical efficiency requires the use of plant-level data for each of the five-digit KSIC industries available from the Census of Manufactures, one may consture the findings of this paper as empirical evidence of technical efficiency in Korea's manufacturing industries at the most disaggregated level. We start by clarifying the relationship among the various concepts of efficiency-allocative effciency, factor-price efficiency, technical efficiency, Leibenstein's X-efficiency, and scale efficiency. It then becomes clear that unless certain ceteris paribus assumptions are satisfied, our estimates of technical inefficiency are in fact related to factor price inefficiency as well. The empirical model employed is, what is called, a stochastic frontier production function which divides the stochastic term into two different components-one with a symmetric distribution for pure white noise and the other for technical inefficiency with an asymmetric distribution. A translog production function is assumed for the functional relationship between inputs and output, and was estimated by the corrected ordinary least squares method. The second and third sample moments of the regression residuals are then used to yield estimates of four different types of measures for technical (in) efficiency. The entire range of manufacturing industries can be divided into two groups, depending on whether or not the distribution of estimated regression residuals allows a successful estimation of technical efficiency. The regression equation employing value added as the dependent variable gives a greater number of "successful" industries than the one using gross output. The correlation among estimates of the different measures of efficiency appears to be high, while the estimates of efficiency based on different regression equations seem almost uncorrelated. Thus, in the subsequent analysis of the determinants of interindustry variations in technical efficiency, the choice of the regression equation in the previous stage will affect the outcome significantly.

• Korean Security Journal
• /
• no.28
• /
• pp.103-130
• /
• 2011

This study is the research of enterprise security for raising the profitability and stability of Korean companies in global business environment and strategic cooperation of business. As the scientific technology gets complicated as day goes by and new competitors appear regardless the border in the modern business environment, the situation happens frequently which the huge company hands over their market to the new one armed with the innovative thinking overnight. To survive such new environment, the answer is the change of paradigm regarding business management method at the new point of view. With the low level of security risk management of Korean companies which stick to old habit, the security management which helps the companies secure profits is not affordable. The global village where the population of 7 billions live in 21st century is facing up to the rapid ecological adaptation. The rapid change of climatic environment creates the hundreds of thousands of sufferers in a moment, and we have been watching the millions of livestock are buried alive due to new contagious disease everyday. Such change encourages the humans in global village to change the basic way of living. The business ecosystem which is the basic root for economic life cannot be an exception. To survive the business environment of 21st century, the security risk management at management level is required and the reporting line of companies should be established newly for raising business competing power through security risk management. The companies should bear in mind that they can be disappeared into our old memories overnight if they are not sensitive to the changing environment. Out of new risks for the modern companies, the field especially Korean companies are dealing easily is the security risk. Not like past, the security risk which's size is much more massive and its propagation velocity is very fast is the one of important business risks which the management should take care. Out of security risks which influence on the modern companies significantly, the brand of companies, protection of their reputation, continuity of production and operation and keeping customer's trust are prior to the others. This study offered the suggestion regarding enterprise security and the strategic cooperation of business to deal with such security risk effectively.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.3
• /
• pp.65-71
• /
• 2008

Purpose: This paper studied the effect of eyes on the comparison between the distance optical centers problem of dispensing reading glasses made by optician and finished reading glasses in the current market. Methods: The method of this study has been measured by eleven different categories from +1.00D to +4.00D. This study also separated into three groups by their optical frame size and measured optical center point (O.C) and optical center height (O.H) with 200 peoples of man and females over 40 years old without ocular disease living in Gwang-san gu, Gwang-Ju city. Results: As a result, optical center point ranged from 57 mm to 80 mm and it turned to be most common range is from 61 mm to 65 mm (64.6%). Moreover, the optical center height ranged from 1 mm to 8mm and most common ranged (23%) were 4 mm. In other words, finished reading glasses have irregular optical ranges. After observing 200 people who are over 40 years old men and women, result shows that more than 75.5% (151 people) currently use finished reading glasses. Survey of 151 people, most common error between the finished reading glasses's O.C and the wearers P.D were 4 mm (45%). Furthermore, the most common error between the finished reading glassses's O.H and the wearers O.H ranged from 3 mm to 4 mm. Astonishingly, the entire 151 people who wear finished reading glasses appeal that they feel tiredness on their eyes when they wear finished reading glasses. 53 people (35%) claimed that they feel tiredness on their eyes after 10 to 20 minutes wearing finished reading glasses. Base on the research, We conducted more experiment to find the value of prism of optical centers err because it will tell us whether the finished reading glasses are good enough to wear or not. We multiplied diopter by the difference between finished reading glasses's O.C. and wearer's P.D. Consequently, We found out that the finished reading glasses counter to the German RAL-RG 915 policy. And We also found that it is relative to the diopter of lenses. In conclusion, based on the researched that wearing finished reading glasses have a dangerous factor for our vision. Therefore optician must need to recommend correctly made dispensing reading glasses based on the optical center point.

• Applied Chemistry for Engineering
• /
• v.31 no.2
• /
• pp.115-124
• /
• 2020

Sustainable plastics can be mainly categorized into (1) biodegradable plastics decomposed into water and carbon dioxide after use, and (2) biomass-derived plastics possessing the carbon neutrality by utilizing raw materials converted from atmospheric carbon dioxide to biomass. Recently, biomass-derived engineering plastics (EP) and natural nanofiber-reinforced nanocomposites are emerging as a new direction of the industry. In addition to the eco-friendliness of natural resources, these materials are competitive over petroleum-based plastics in the high value-added plastics market. Polyesters and polycarbonates synthesized from isosorbide and 2,5-furandicarboxylic acid, which are representative biomass-derived monomers, are at the forefront of industrialization due to their higher transparency, mechanical properties, thermal stability, and gas barrier properties. Moreover, isosorbide has potential to be applied to super EP material with continuous service temperature over 150 ℃. In situ polymerization utilizing surface hydrophilicity and multi-functionality of natural nanofibers such as nanocellulose and nanochitin achieves remarkable improvements of mechanical properties with the minimal dose of nanofillers. Biomass-derived tough-plastics covered in this review are expected to replace petroleum-based plastics by satisfying the carbon neutrality required by the environment, the high functionality by the consumer, and the accessibility by the industry.

• Journal of Food Hygiene and Safety
• /
• v.32 no.6
• /
• pp.477-484
• /
• 2017

This study was conducted to investigate the content of sulfur dioxide, carotenoids and the degree of contamination of Bacillus cereus in 33 kinds of dried sweet potato from domestic mainly dried agricultural products in Korea. According to the characteristics of dried sweet potato samples, it was classified into four clusters and as a result of analyzing the contents of sulfur dioxide, carotenoids and the degree of contamination B. cereus was no significant difference among the clusters. The detection ranges of residual sulfur dioxide from 33 dried sweet potatoes ranged from 0.38 to 28.16 mg/kg, three cases (9.09%) were detected at the reference level of 10 mg/kg or more. But no samples exceeding 30 mg/kg, the tolerance level of sulfur dioxide in dried sweet potatoes were detected. Since dried sweet potato does not have a standard for carotenoids, when comparing the national and international standards of carotenoids, the range of detection of carotenoids in dried sweet potato was $46{\sim}2,663{\mu}g$/100 g, which was within the reference range of $0{\sim}9,826{\mu}g$/100 g. In principle colonies suspected to be B. cereus in dried sweet potato were not detected. In 7 cases (21.21%), there were detected in the range of 0.05~1.59 log CFU/g but not more than 3 log CFU/g as the reference value. The results of this study are expected to be used as basic data to establish quality standard for dried sweet potatoes. In order to control the quality of dried sweet potatoes in domestic market, raw materials, drying method and packaging after distribution, it is necessary to maintain and maintain the process steadily.

• Food Science of Animal Resources
• /
• v.29 no.3
• /
• pp.364-373
• /
• 2009

This study was conducted to provide fundamental information in developing muscle-specific strategies to improve the quality and value of low-fat pork cuts upon evaluating meat qualitative parameters of twenty one (21) muscle samples selected from ten (10) market-weighted crossbred pigs. The following observations were made. The pH was highest for subscpularis and lowest for gluteus superrificialis (p<0.05); the subscpularis can hold water the most (p<0.05), biceps femoris loses the most content upon cooking, while subscpularis loses the least content (p<0.05); gluteus superrificialis (p<0.05) has the most purge loss contents, and infraspanatus and gastrocneminus contained the most collagen, while adductor had the least collagen (p<0.05); biceps femoris has the most WB-shear force values while subscpularis (p<0.05) has the least; pectoralis profundi-fan was the most protein soluble; semitendinosus has the most gel strength (p<0.05). In the properties of meat color, tensor fasciae latae shows the highest CIE $L^*$ (lightness) values (p<0.05) and supraspinatus, brachiocephalicus and infraspanatus have the highest CIE $a^*$ (redness, p<0.05) values; vastus intermedius has the most myoglobin content while longissimus dorsi (p<0.05) has the least; infraspanatus is the most tender (one of the sensory properties) while biceps femoris was the most tough among all tested muscles (p<0.05); the pectoralis profundi-fan was the most flavorful pork while vastus intermedius was the least (p<0.05); supraspinatus, infraspanatus, semitendinosus, and vastus intermedius were juiciest while longissimus dorsi was the driest (p<0.05). In overall likeness, the semitendinosus and infraspanatus were most liked while biceps femoris and longissimus dorsi were the least (p<0.05). This study presents the results of several parameters in selected pork muscle samples which are useful information for developing new muscle-specific strategies to improve the quality of consuming meat and meat products.

• Journal of Distribution Science
• /
• v.9 no.3
• /
• pp.73-82
• /
• 2011

This study presents an effective and distinctive marketing strategy through the implementation of the aesthetic art marketing communication technique of storytelling. The reason applying art to marketing is effective is that it gives "class" and aesthetic beauty to the brand's image, which will lead to an increase in revenue and loyalty of consumers. The story stands in for the brand's subject of "desire." Luxury brand customers not only consume high-quality products, require the utmost in service, and value of the brand, they also appreciate the story the brand is telling. The story, combined with art, is called art marketing communication; it makes the brand more unique through its enhanced visual elements. The study discusses art collaboration, art exhibition, a transforming architecture project, art advertisement, a flagship store, and a human resource training center. Based on the "desire," I adopted the element and principle of storytelling. By visualizing the brand with a symbol, the company is able to relate to consumers' sentimentality. Through storytelling art marketing communication, and the strategy using relevance of brand and artist's popularity, the research shows efficient art marketing influences to the brand's image. The results of the research indicate that by using adequate art marketing communication that best reflects the identity and story of the luxury brand, it produces great results; the research also demonstrated, in various ways, that art marketing will succeed. The case showed the following outcomes. First, consumers have a tendency to choose a brand that is associated with an empathizing story. World renowned brands see through the market's "desires" for unique stories, and they also provide the ability to amuse consumers. The story in a product will become an important competitive element in future markets. Second, the art marketing communication applying a story rendered a brand with distinction. The most effective art marketing communications are art collaboration, art exhibition, locomotive architecture project, and others that are adopted as various means. Third, the brand's products were considered as an art piece, which led to not only strengthening the loyalty of consumers but also an increase in sales. In addition, the company could sustain a premium price for the goods sold. By adapting art to a brand's tradition, an innovative and creative new product provides consumer satisfaction, and producing goods in limited editions creates enthusiastic collectors. Fourth, this study suggests an abridged report, implication, limitation of the study, and directions for further research. Referring to the case for the adaptation of luxury brands, efficient art marketing strategies considering Korean company brand and efficiently study preceding Korean company brand art marketing strategy could be proposed.

• Journal of Distribution Science
• /
• v.9 no.3
• /
• pp.83-94
• /
• 2011

Most domestic companies, with the exclusion of major firms, are reluctant to implement a supply chain management (SCM) network into their operations. Most small- and medium-sized enterprises are not even aware of SCM. Due to the inherent total-systems efficiency of SCM, it coordinates domestic manufacturers, subcontractors, distributors, and physical distributors and cuts down on cost of inventory control, as well as demand management. Furthermore, a lack of SCM causes a decrease in competitiveness for domestic companies. The reason lies in the fundamentality of SCM, which is the characteristic of information sharing, process innovation throughout SCM, and the vast range of problems the SCM management tool is able to address. This study suggests the contemplation and reformation of the current SCM situation by analyzing the SCM strategic plan, discourses and logical discussions on the topic, and a successful case for adapting SCM; hence, the study plans to productively "process" SCM. First, it is necessary to contemplate the theoretical background of SCM before discussing how to successfully process SCM. I will describe the concept and background of SCM in Chapter 2, with a definition of SCM, types of SCM promotional activities, fields of SCM, necessity of applying SCM, and the effects of SCM. All of the defects in currently processing SCM will be introduced in Chapter 3. Discussion items include the following: the Bullwhip Effect; the breakdown in supply chain and sales networks due to e-business; the issue that even though the key to a successful SCM is cooperation between the production and distribution company, during the process of SCM, the companies, many times, put their profits first, resulting in a possible defect in demands estimation. Furthermore, the problems of processing SCM in a domestic distribution-production company concern Information Technology; for example, the new system introduced to the company is not compatible with the pre-existing document architecture. Second, for effective management, distribution and production companies should cooperate and enhance their partnership in the aspect of the corporation; however, in reality, this seldom occurs. Third, in the aspect of the work process, introducing SCM could provoke corporations during the integration of the distribution-production process. Fourth, to increase the achievement of the SCM strategy process, they need to set up a cross-functional team; however, many times, business partners lack the cooperation and business-information sharing tools necessary to effect the transition to SCM. Chapter 4 will address an SCM strategic plan and a case study of LG Electronics. The purpose of the strategic plan, strategic plans for types of business, adopting SCM in a distribution company, and the global supply chain process of LG Electronics will be introduced. The conclusion of the study is located in Chapter 5, which addresses the issue of the fierce competition that companies currently face in the global market environment and their increased investment in SCM, in order to better cope with short product life cycle and high customer expectations. The SCM management system has evolved through the adaptation of improved information, communication, and transportation technologies; now, it demands the utilization of various strategic resources. The introduction of SCM provides benefits to the management of a network of interconnected businesses by securing customer loyalty with cost and time savings, derived through the consolidation of many distribution systems; additionally, SCM helps enterprises form a wide range of marketing strategies. Thus, we could conclude that not only the distributors but all types of businesses should adopt the systems approach to supply chain strategies. SCM deals with the basic stream of distribution and increases the value of a company by replacing physical distribution with information. By the company obtaining and sharing ready information, it is able to create customer satisfaction at the end point of delivery to the consumer.