• Journal of Navigation and Port Research
• /
• v.47 no.6
• /
• pp.419-429
• /
• 2023

The pinnacle of rapidly changing and advancing maritime transportation technology is expected to be the Maritime Autonomous Surface Ship (MASS). The implementation of various services within the MASS is likely to be feasible through the ship-centric network known as the S2X communication system. However, existing communication systems face issues such as service traffic saturation and failure to meet demanded functionalities, necessitating the proactive introduction of additional communication technologies. In this study, the concept of S2X communication for the MASS was redefined, deriving required functionalities and ultimately selecting frequencies suitable for utilization. Candidate frequency groups suitable for the derived communication requirements were identified, and communication frequencies prioritized for the initial application were chosen through expert consensus. It is anticipated that through further research, including experimentation to validate these frequencies, they could be utilized in implementing services for autonomous ship navigation in the future.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.112-113
• /
• 2021

선박을 주로 하는 자율 해상 모빌리티의 안전한 운항을 위해 필수적인 직접통신의 필요성에 대응하여 M-S2X 통신 개발 방안을 제시한다. M-S2X 통신을 선박중심 직접통신, SCDC(Ship Centric Direct Communication)으로 정의하며 선박과 선박 통신 중에서 선박과 선박 통신의 대용량 및 고속화가 필요한 점, 그리고 선박 운항 안전을 위한 통신 수요의 대부분이 선박을 중심으로 그 주변 객체와 상호 통신이 필요한 점을 고려한 것이다. 관련 연구에서 선박과 선박, 선박과 육상 간 통신 소요를 제시하였고 이를 통해 기존 AIS등의 레거시 해상통신만으로는 자율운항선박과 같은 해양 모빌리티의 자율성 확보에 어려움이 있음을 알 수 있다. 이에 따라 M-S2X 통신을 구현하는 기술로 VDE와 비면허대역과 같은 고대역의 통신기술을 활용하여 선박과 같은 해양 모빌리티가 주변의 객체(선박, 해양모빌리티, 인프라, 익수자 등)와 직접 통신할 수 있는 통신 인프라 환경을 제공한다면 향후 도래할 해양 모빌리티 환경의 기본 통신 기술로 활용될 수 있을 것이다.

• Journal of Navigation and Port Research
• /
• v.45 no.6
• /
• pp.352-359
• /
• 2021

This paper presents the definition and importance of ship-centric direct communication concerning ship safety of maritime autonomous and unmanned ships. It also proposes the concept of MX-S2X communication based on high frequency for wide-bandwidth technology and describes the design and simulation result for the physical layer of MX-S2X. It considered high-speed communication as well as overcoming maritime multi-path fading required to be resolved in the marine environment. The physical layer of MX-S2X communication was designed to overcome the occurrence of error-floor caused by multi-path fading even with receiving sufficient signal strength. To this purpose, a performance analysis was conducted on the physical layer by applying the channel model of the actual maritime communication environment. As a result of the performance analysis of the MX-S2X physical layer, it was confirmed that the BER error-floor observed in the VDE physical layer test was overcome, and it operated within the SNR 2dB degradation range compared to the AWGN channel. It is expected that this will show enough performance suitable for short-distance ship-centered direct communication and can be used for direct communication of maritime autonomous ships, unmanned ships, and group navigation of themshortly.

• Journal of Surface Science and Engineering
• /
• v.57 no.3
• /
• pp.179-191
• /
• 2024

This study focuses on improving the photocatalytic degradation efficiency by synthesizing a TiO₂/WO₃ composite. Given the environmental significance of photocatalysis and the limitations posed by TiO₂'s large bandgap and high electron recombination rate, we explored doping, surface modification, and synthesis strategies. The composite was created using a ball mill process and heat treatment, analyzed with field emission scanning electron microscope, high resolution X-ray diffraction, Raman microscope, and UV-Vis/NIR spectrometer to examine its morphology, composition and absorbance. We found that incorporating WO₃ into the TiO₂ lattice forms a W_x-Ti_1-x-O₂ solution, with optimal WO₃ content reducing the band gap and enhancing sterilization efficiency by inhibiting the anatasese to rutile transition. This contributes to the field by offering a way to overcome TiO₂'s limitations and improve photocatalytic performance.

• Journal of Navigation and Port Research
• /
• v.46 no.6
• /
• pp.570-575
• /
• 2022

The MX-S2X, utilizing high-frequency broadband communication technology, provides a reliable connection between land, ship, and facilities. This technology is expected to be effectively utilized as a future maritime communication infrastructure in the upcoming mixed navigational situation among autonomous and manned and/or unmanned ships. Following the physical layer design and M&S-based performance analysis of the MX-S2X system to overcome maritime multipath fading, this paper confirms the optimized and detailed design of physical layer hardware and implemented it to verify the performance. The PER(Packet Error Rate) performance was then measured by configuring a test environment to verify the implemented hardware. The results showed that the performance degradation was 0.2 dB in the AWGN environment and 1.2 dB in the Multi-path Fading on Sea Environment, thus confirming the successful implementation of the physical layer.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2016.05a
• /
• pp.15-17
• /
• 2016

The congestion situation of Korea's port is further inclining due to the number of arriving and departing vessels and increase in the size of the size. Indicators for assessing whether the Vessel Traffic Congestion is called the Marine Traffic Congestion and it is used as a diagnostic entries in the Maritime Traffic Safety Audit System. In the diagnostic system, 6L (longitudinal) X 3.2L (transverse) is used as ship's domain in cases of harbor. This study is to determine the safety distance of the VTS officer and the ship operators by targeting the Busan harbor, which has the most number of ships that arrive/depart in Korea and listen to the communication of the VTS and calculate the communication time of the VTS officer and the ship operators for 7 days. By utilizing the distance communication port, the safety distance between the controllers and the ship operators is derived. It can be used for basic information of VTS Officer and Ship's operator's Safety distance in Busan port's in&out harbor.

• Journal of Navigation and Port Research
• /
• v.30 no.9
• /
• pp.763-766
• /
• 2006

In this paper, the EM wave absorbers were designed and fabricated for X -band sensors using Carbon of dielectric material with CPE. The complex relative permittivity of samples is calculated by using measurement results of S-parameter. We simulated the double-layered type EM wave absorber with broad bandwidth using the measured complex relative permittivity by changing the thickness and layer, which was fabricated based on the simulated design The fabricated EM wave absorber consists of 1 mm first layer sheet facing metal with Carbon composition ratio 70 vol. % and 1.5 mm second layer sheet with Carbon composition ratio 60 vol. %. The measured results showed a good agreement to the simulated ones. It is found toot the optimized absorption ability of double-layered type EM wave absorber with thickness of 2.5 mm is higher than 10 dB from 7.8 GHz to 13.3 GHz.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.297-300
• /
• 2006

In this paper, the EM wave absorbers were designed and fabricated for X-band sensors using Carbon of dielectric material with CPE. The complex relative permittivity of samples is calculated by the measured S-parameter data. We simulated the double-layered type EM wave absorber with broad bandwidth using the measured complex relative permittivity by changing the thickness and layer, which was fabricated based on the simulated design. The fabricated EM wave absorber consist of 1mm first layer sheet facing metal with Carbon composition ratio 70 vol% and 1.5 mm second layer sheet with Carbon composition ratio 60 vol%. The comparisons of simulated and measured results are good agreement. As a result, the optimized absorption ability of double-layered type EM wave absorber with thickness of 2.5 mm is higher than 10 dB from 7.8 GHz to 13.3 GHz.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.3
• /
• pp.107-112
• /
• 2010

The Cu$(In_{1-x}Ga_x)Se_2$ is the absorber material for thin film solar cell with high absorption coefficient of $1{\times}10^5cm^{-1}$. In the case of CIGS, the movable energy band gap from $CuInSe_2$ (1.00 eV) to $CuGaSe_2$ (1.68 eV) can be acquired while controlling Ga contain ratio. Generally, the co-evaporator method have used for development and fabrication of the CIGS absorption layer. However, this method should need many steps and lengthy deposition time with high temperature. For these reasons, in this paper, a new growth method of CIGS layer was attempted to hydride vapor transport (HVT) method. The CIGS mixed-source material reacted for HCl gas in the source zone was deposited on the substrate after transporting to growth zone. c-plane $Al_2O_3$ and undoped GaN were used as substrates for growth. The characteristics of grown samples were measured from SEM and EDS.

• Journal of Navigation and Port Research
• /
• v.27 no.5
• /
• pp.499-504
• /
• 2003

This paper describes the system for evaluating the sea wave informations such as wave direction and wave length in real time, by using image data obtained from the marine X-band radar. We proposed here a method for automatic selection of the partial image data without the user's individual selection at the radar. We also discussed that the wave direction could be obtained by a 2-dimensional discrete Fourier transform algorithm. We carried some evaluation works on the algorithm through computer simulation. The obtained thirteen radar image data under several sea surface conditions were analyzed by the method described and the result was presented.