• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.4
• /
• pp.482-488
• /
• 2019

Leisure and business facilities have been steadily developing in Korea. Among waterborne leisure vessels and equipment, the distribution and sale of kayaks and canoes have significantly increased. Previously, (FRP) materials were primarily employed for constructing kayaks. However, owing to global warming and depletion of natural resources, the demand for non-polluting renewable energy is rapidly increasing, which has increased the demand for carbon fibers. To meet the requirements of changing social consciousness, a carbon fiber-based commercial kayak was designed in this study. Resistance analysis and structural safety were conducted by employing software tool for verifying the reliability of the proposed kayak. The pressure resistance and frictional resistance were examined in a wide range of speed. Obtained results indicate that at speeds greater than 2.6 m/s, the pressure resistance significantly increases and the total resistance also increases. Furthermore, the results corroborate that the proposed kayak structure has a adequate safety with respect to the design loads that are considered during operating conditions.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.988-995
• /
• 2020

Air gun shock systems are commonly used as alternative explosion energy sources for underwater explosion (UNDEX) shock tests owing to their low cost and environmental impact. The airbag inflator of automotive airbag systems is also very useful to generate extremely rapid underwater gas release in labscale tests. To overcome the restrictions on the very small computational time step owing to the very fine fluid mesh around the nozzle hole in the explicit integration algorithm, and also the absence of a commercial solver and software for gas UNDEX of airbag inflator, an idealized airbag inflator and fluid mesh modeling technique was developed using nozzle holes of relatively large size and several small TNT charges instead of gas inside the airbag inflator. The objective of this study is to validate the results of an UNDEX response analysis of one and two idealized airbag inflators by comparison with the results of shock tests in a small water tank. This comparison was performed using the multi-material Arbitrary Lagrangian-Eulerian formulation and fluid-structure interaction algorithm. The number, size, vertical distance from the nozzle outlet, detonation velocity, and lighting times of small TNT charges were determined. Through mesh size convergence tests, the UNDEX response analysis and idealized airbag inflator modeling were validated.

• Journal of Navigation and Port Research
• /
• v.39 no.6
• /
• pp.465-472
• /
• 2015

SEEMP (Ship Energy Efficiency Management Plan) guidelines for a ship's GHG reduction include a machinery modification of hull, an installation of energy efficiency enhanced attachment in hardware methods. It is also possible to bring a ship energy efficiency improvement by fuel-efficient operations or in other software methods. Hardware modification or installation on ship can bring financial burdens to a ship company compared to its improvement expectation. On the other hand, Software based energy-saving technology can be applicable on various ship types, and it is also expected high efficiency of ship energy use compared to hardware based technology in perspective of the investment costs and efficiency. In this paper, it is described that the ship handling simulator based evaluation was carried out using representative ship model of bulk, container and VLCC. Simulation environments were separated into 6 conditions according to the sea-state and weather condition, and the operation results were compared with those before and after energy saving system applied The container ship showed the largest FOC save rate after energy saving system applied although the others also showed energy save rate after using the system.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.266-274
• /
• 2021

Ship officers are subject to excessive job stress, which has negative physical and psychological impacts and may adversely affect the smooth supply and demand of human resources. In this study, a mobile web application was developed as a tool for systematic job stress measurement and management of officers and verified through quality evaluation. Requirement analysis was performed by ship officers and staff in charge of human resources of shipping companies, and the results were reflected in the application configuration step. The application was designed according to the waterfall model, which is a traditional software development method, and functions were implemented using JSP and Spring Framework. Performance evaluation on the user interface, confirmed that proper input and output results were implemented, and the respondent results and the database were configured in the administrator interface. The results of evaluation questionnaires for quality evaluation of the interface based on ISO/IEC 9126-2 metric were significant 4.60 for the user interface and 4.65 for the administrator interface in a 5-point scale. In the future, it is necessary to conduct follow-up research on the development of data analysis system through utilization of the collected big-data sets.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.1
• /
• pp.19-24
• /
• 2010

This paper proposes a unified time-domain channel estimator (UTD-CE) for ubiquitous wireless broadband access based on orthogonal frequency division multiplexing (OFDM) systems. As a part of a software radio platform for ubiquitous services, the proposed UTD-CE can be exploited with the simply changeable parameters, pilot symbols and pilot subcarriers allocation, which are usually different according to the system specifications such as IEEE802.11x WiFI, IEEE802.16x WiMAX, DMB, Media FLO, DVB-H, etc. Given the pilot information, the channel frequency responses (CFRs) of data subcarriers will be analogously estimated by Wiener filtering and discrete Fourier transform (DFT)-based interpolation in the UTD-CE. Simulation results indicate that the proposed method significantly outperforms the conventional time-domain channel estimator when the pilot information is changed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.6
• /
• pp.1243-1251
• /
• 2017

When a Ship sails in the ocean, it is significant to find one's position for safe navigation. Most of ships have been using GPS navigation since its development after 1990's. The celestial navigation was used as the navigation method when sailing in the ocean, but time-consuming process such as complicated calculation and plotting the result on chart diminished its utilization. The thesis explains convenience and utilization of existing celestial navigation by resolving challenges it has. As a way of enhancing the celestial navigation, the author developed a software which incudes a numerical formula based on the previous calculation process. When a navigator inputs the altitude of sun, GHA and dec into computer while sailing, the position of the ship will be displayed as the coordinates. The improved method thus reaffirmed the usefulness of the celestial navigation and will greatly serve as means of navigation in the occurrence of distress. Abstract should be placed here.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.5
• /
• pp.445-453
• /
• 2020

The use of tugboats for the safe berthing/unberthing of ships is the most crucial factor in the safe and efficient operation of the harbor. However, the adequate number and size of tugboats that should be held based on the characteristics of the port have not been investigated in detail, which causes disputes between involved parties. Therefore, the suitable number of tugboats and the ratio of the tugboat horsepower were determined in this study using simulation techniques, with focus on Ulsan Port. First, the ship and tugboat-operating models were designed for simulation application. Next, the input variables defined in the model design were standardized in an inputtable form using ARENA software. In addition, the arrival and division process of the ship was designed and simulated as an ARENA model. Finally, the simulation results for six scenarios showed that an effective tugboat operation could be achieved when 42 tugboats were held at Ulsan Port.

• Journal of Advanced Navigation Technology
• /
• v.18 no.1
• /
• pp.22-28
• /
• 2014

This paper presents the design and development of ECU simulator in order to verify automatic firmware update system of ECU SW on the vehicle. We designed and developed general-proposed ECU simulator as devide into HW and SW parts. HWadopt 32bit MPU, CAN, LIN, LCD, and touch-pad button to satisfy general-proposed ECU level. And SW constructed as finite-state-machine structure in order to support HW spec. We developed ECU manager which deliveries update data to verify validity of operation. And we tested ECU simulator with ECU manager. For test of validity of ECU simulator, we set 4 scenarios between ECU simulator and manager. As the result, we confirmed validity of operation in ECU simulator for automatic SW update system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.10
• /
• pp.1353-1358
• /
• 2021

IoT (Internet of Things) emerges from various technologies such as communications, micro processors and embedded system and so on. The IoT has also been used to UAV (Unmanned Aerial Vehicle) system. In manned aircraft, a pilot and co-pilot should control FCS (Flight Control System) with FBW(Fly By Wire) system for flight operation. In contrast, the flight operation in UAV system is remotely and fully managed by GCS (Ground Control System) almost in real time. To make it possible the communication channel should be necessary between the UAV and the GCS. There are many protocols between two systems. Amongst them, MAVLink (Macro Air Vehicle Link) protocol is representatively used due to its open architecture. MAVLink does not define any securities itself, which results in high vulnerability from external attacks. This paper proposes the method to enhance data security in GCS network by applying cryptographic methods to the MAVLink messages in order to support safe UAV operations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.8
• /
• pp.1124-1129
• /
• 2021

The application area based on UAV (Unmanned Aerial Vehicle) is continuously increasing as time passing by. In particular the UAVs which consist of more than four horizontal propellers and the functionality of VTOL (Vertical Take-Off and Landing) are utilized in diverse platforms and the application products due to their safety and aerodynamically simpler design and architectures. The most UAV missions are controlled by GCSs (Ground Control System). The GCSs are generally connected to the internet and get electrical map and environmental information such as temperature, humidity, wind speed, wind direction and so on. In this paper, we design a system for UAV system to have capability of approaching to a certain ship and monitoring her efficiently by using AIS (Auto Identification System) information. Furthermore we verify that adapting AIS on GCS side is more efficient through experiments.