• 한국항해항만학회지
• /
• 제30권9호
• /
• pp.755-762
• /
• 2006

When we consider to develop a new harbor, the most important factor, we think, is the lowest water depth of waterway and approaching channel for safe navigation of vessel. The existing harbors have been being dredged to meet the international trend of jumbo sized vessels by adopting the new design criteria. As the dredged materials over the expected at the design level were common and there are still lack of land based reclamation area, we have no choice to discharge the dredged materials in open sea area In this study, we analysed the behavior of discharged materials at the dumping area of offshore, which were collected from the dredging work at the waterway in Busan New Port. We measured the tidal currents and analyzed the waters of dumping site after the dumping work. These were used to evaluate the numerical models. Suspended Solids(SS) were introduced to the diffusion model. Because of the characteristic of the dumping site, the speed of initial diffusion and settle down of the discharged materials was so fast. Therefore, we believe that the dumped materials do not cause a significant impact to the marine environment.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 추계학술대회
• /
• pp.49-55
• /
• 2004

제한수역에서 선박조종시 선박간에 생기는 상호간섭력과 또한 이러한 선박들이 측벽으로부터 받는 간섭력은 항로설계 및 선박조종운동의 관점에서 보았을 때 대단히 중요한 문제이다. 이 논문에서는 측벽 부근을 항해하는 두 척의 대형선박에 미치는 측 벽의 간섭 영향에 대해서 다루었다. 이 논문의 목적은 협수로나 천수로와 같은 제한수로에서 근접하여 항해하는 선박들이 안전조종 운동을 할 수 있도록 상호 간섭력을 최소화 할 수 있는 선박의 속력 및 선박과 선박 및 측벽 상호간의 거리에 대한 계산을 행하고, 제한된 항로에서 안전하게 항해할 수 있는 기준을 마련하는데 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1618-1622
• /
• 2004

In this paper, the linearly interpolated PRC(Pseudo Range Correction) regenerating algorithm was applied to improve the DGPS(Differential Global Positioning System) positioning accuracy at user's spot by using the various PRC information obtained from multi-DGPS reference stations. The PRC information of each GPS satellite is not varying rapidly; it is possible to assume that the variation of PRC information of each GPS satellite is linear. So the linearly interpolated PRC regenerating algorithm can be applied to improve the DGPS positioning accuracy at user's spot by using the various PRC information obtained from multi-DGPS reference stations. To test the performance of the linearly interpolated PRC regenerating algorithm, maritime DGPS reference stations' PRC data was used in RTCM format. 11 maritime DGPS reference stations are in service providing DGPS information to public since 1999. Two set of 3 DGPS reference stations are selected to compare the performance of the linearly interpolated PRC regenerating algorithm. The DGPS positioning accuracy was dramatically improved about 40%. Linearly interpolated PRC regenerating algorithm adopted multi-channel DGPS receiver will be developed in near future.

• Journal of electromagnetic engineering and science
• /
• 제4권4호
• /
• pp.143-149
• /
• 2004

This paper describes characteristics of the single-balanced low IF resistive FET mixer for the digital beam forming(DBF) receiver. This DBF receiver based on the direct conversion method is designed with Low IF I and Q channel. A radio frequency(RF), a local oscillator(LO) and an intermediate frequency(IF) considered in this research are 1950 MHz, 1940 MHz and 10 MHz, respectively. Super low noise HJ FET of NE3210S01 is considered in design. The measured results of the proposed mixer are observed IF output power of -22.8 dBm without spurious signal at 10 MHz, conversion loss of -12.8 dB, isolation characteristics of -20 dB below, 1 dB gain compression point(PldB) of -3.9 dBm, input third order intercept point(IIP3) of 20 dBm, output third order intercept point(OIP3) of 4 dBm and dynamic range of 30 dBm. The proposed mixer has 1.0 dB higher IIP3 than previously published single-balanced resistive and GaAs FET mixers, and has 3.0 dB higher IIP3 and 4.3 dB higher PldB than CMOS mixers. This mixer was fabricated on 0.7874 mm thick microstrip $substrate(\varepsilon_r=2.5)$ and the total size is $123.1\;mm\times107.6\;mm$.

• 수산해양기술연구
• /
• 제44권3호
• /
• pp.207-217
• /
• 2008

Costal regions in Korea often suffer severe damages due to wave-induced disasters, storm surge disasters and so on. therefore, many engineers and researchers have devoted their energy to prevent these costal disasters. The development of artificial reefs including sunken vessels is one of their remarkable achievements and various kind of these artificial upwelling structures have been designed and applied. However, the flow characteristics around a Tetrapod under the water has not been investigated experimentally. So in this article, in uniform flow of circulating water channel and some different velocities, PIV measurement has been conducted on the flow characteristics behind a Tetrapod. The results were analyzed on the flow characteristics of both cases of a Tetrapod. Therefore, it can be concluded that the both cases have its own distinctive flow characteristics behind the bluff body; Case A has an steep upstream flow pattern. On the contrary, Case B has an developed downstream flow pattern in the near wake of the Tetrapod. The velocity gradient at position x=150mm of Case-A appears gently up and down But, the velocity gradient at the same position of Case-B appears better highly up and down.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권6호
• /
• pp.989-996
• /
• 2008

Recently, a few types of fish-cage in open sea are researched. This fish-cage has to operate monitoring system for keeping an optimum living condition for fish. The most efficient monitoring system is WVMS(Wireless Vision Monitoring System) for fish-cage in open sea. WVMS should be able to transmit video signal and communicate with each controller. So. it needs to be based on WLAN(Wireless LAN) which has characteristic of higher transfer-rate, In this paper, we propose a structure of WVMS using WLAN equipments for maritime environment and prove its effectiveness. We present the propagation loss model of WVMS's communication channel. measured by field test, and discuss its validity compared with the predictive value based on the Friss propagation model and Plane earth reflection model. We present the number of frames that is received from WLAN modem connecting with underwater-camera in field test spots. As a result, we confirmed that proposed WVMS is suitable for maritime environment and it is possible to be applied to fish-cage in open sea on 'seogwipo'.

• 한국항해항만학회지
• /
• 제26권1호
• /
• pp.127-136
• /
• 2002

항공 대잠수함전에 사용되는 방향주파수분석저장 소노부위 (DIFAR Sonobuoy)에 방위정보를 제공하는 플럭스-게이트 콤파스의 위상감응검출 (PSD) 회로 설계와 구현에 관해서 기술하였다. PSD 회로는 쌍동-T RC 회로망을 갖는 능동형 대역필터로 구성하였다. PSD 회로에 대한 성능실험 결과, 대역통과 필터가 지구자장 방향에 비례하는 2Fe의 2차 고조파 신호를 효과적으로 걸러냄을 확인하였다. 그 결과 방위 신호 정보를 획득할 수 있었다.

• 한국항해항만학회지
• /
• 제33권10호
• /
• pp.665-669
• /
• 2009

수역에서 항행할 시, 선박운항자는 위험을 회피하기 위해 타와 주기관 사용 등 여러 가지 조종요소를 사용하게 된다. 그 때 어느 정도의 조작량을 사용하는 가에 관해서는 선박운항자 개인의 특성에 따라 그 사용량 및 빈도는 달라지게 된다. 그러나 이러한 조종 요소의 빈번한 사용은 선박운항자에게 일정한 부하를 주게 될 것으로 생각된다. 본 연구에서는 이 부하를 조종부하로 정의하고, 교각이 설치된 직선 항로를 통항하는 시뮬레이터 실험을 통하여 조선 곤란성과의 관계를 접근하고자 하였다. 사용한 변수 항목으로는 우회와 감속과 이러한 조종 행동에 따른 항행시간 연장률 및 조선 곤란성(Environmental Stress) 수치를 이용하였다.

• Ocean and Polar Research
• /
• 제34권3호
• /
• pp.337-348
• /
• 2012

This study investigates the effects of tide, wind and oceanic currents on oil spill dispersions through a series of numerical floats tracking experiments on the Sea Prince oil spill incident occurred in 1995 using a 3-dimensional high resolution ocean circulation model. For that, a total of four experimental cases (experiment with tide, wind and oceanic currents, experiment with tide and oceanic currents, experiment with wind and oceanic currents, and experiment with tide and wind) were compared. It could be seen that results from experiment involving all external forces showed better agreement with the observed pattern of oil slick movement than other cases. The oceanic currents acted to drive floats to move to the western channel of the Korea straits and wind accelerated the eastward movement of floats in the early stage of the incident. Tidal currents played significant role in the horizontal dispersion of floats.

• Journal of electromagnetic engineering and science
• /
• 제2권2호
• /
• pp.117-123
• /
• 2002

This paper describes the design for the resistive FET mixer with low If for the 4-Ch DBF(Digital Beam Forming) receiver This DBF receiver based on the direct conversion method is generally suitable for high-speed wireless mobile communications. A radio frequency(RF), a local oscillator(LO) and an intermediate frequency(If) considered in this research are 2.09 GHz, 2.08 CHz and 10 MHz, respectively. This mixer is composed of band pass filter, a low pass filter and a DC bias circuit. Super low noise HJ FET of NE3210S01 is considered in design. The RE input power, LO input power and Vcs are used -10 dBm, 6 dBm and -0.4 V, respectively. In the 4-Ch resistive FET mixer, the measured If and harmonic components of 10 MHe, 20 MHz and 2.087 CHz are about -19.2 dBm, -66 dBm and -48 dBm, respectively The If output power observed at each channel of 10 MHz is about -19.2 dBm and it is higher 28.8 dBm than the maximum harmonic component of 2.087 CHz. Each If output spectrum of the 4-Ch is observed almost same value and it shows a good agreement with the prediction.