• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.4
• /
• pp.309-316
• /
• 2020

Waterway design should prioritize appropriate channel width to ensure preferential safe passage for the arrival and departure of vessels. To calculate the minimum channel width required for safe passage a comprehensive review of several factors is required. These factors include vessel maneuverability, determined by vessel size, type and speed; environmental factors such as wind, tide, and wave action; human factors, including personal experience and operator judgment as well as marine traffic and navigation support facilities for decision making. However, the Korean channel width design standard is based only on vessel length, and requires improvement when compared with the standards of PIANC, USA, and Japan. This study aims to estimate the appropriate channel width required for one-way traffic in a straight channel, considering various vessel and environmental factors, using Fast Time Simulation (FTS). When the wind speed is 25 knots, with a current speed of 2 knots and a normal vessel speed of 10 knots FTS shows that a 150K GT Cruise Ship requires a minimum channel width of 0.67-0.91 the vessel length (L), whereas a 120K TEU Container Ship and a 300K DWT VLCC require 0.79-1.17 and 1.02-1.59, respectively. Such results can be used to calculate the minimum channel width required for safe passage as an improved Korean design standard.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.7
• /
• pp.472-476
• /
• 2014

We report the characteristics of thin-film transistor (TFT) to make the bi-channel structure with stacked $Mg_{0.1}Zn_{0.9}O$ (Mg= 10 at.%) and ZnO. The ZnO and $Mg_{0.1}ZnO_{0.9}O$ thin films were deposited by radio frequency (RF) co-sputter system onto the thermally oxidized silicon substrate. A total thickness of active layer was 50 nm. Firstly, the ZnO thin films were deposited to control the thickness from 5 nm to 30 nm. Sequentially, the $Mg_{0.1}ZnO_{0.9}O$ thin films were deposited to change from 45 nm to 20 nm. The bi-layer TFT shows more improved properties than the single layer TFT. The field effect mobility and subthreshold slope for $Mg_{0.1}ZnO_{0.9}O$/ZnO-TFT are $7.40cm^2V^{-1}s^{-1}$ and 0.24 V/decade at the ZnO thickness of 10 nm, respectively.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.2
• /
• pp.79-84
• /
• 2006

The present study deals with the flow over a flat plate with repeated roughness elements of 2-dimensional rectangular shape, which can be applied into the study on the natural geographical roughness and the turbulent flow on roughened solid surface. Experiment was performed using PIV technique in the circulating water channel. Results showed that the flow over roughness elements was characterized by the high shear flow emanating from top of roughness element and the recirculating region formed at the trough of two roughness elements. In general, the ratio between the spacing and the height of roughness elements plays a crucial role in developing the flow pattern near wall surface.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.5
• /
• pp.461-467
• /
• 2012

An experimental study was carried out to measure frictional pressure drop in flow boiling to deionized water in a microchannel having a hydraulic diameter of $500{\mu}m$. Tests were performed in the ranges of heat fluxes from 100 to $400kW/m^2$, vapor qualities from 0 to 0.2 and mass fluxes of 200, 400 and $600kg/m^2s$. The frictional pressure drop during flow boiling is predicted by using two models; the homogeneous model that assumes equal phase velocity and the separate flow model that allows a slip velocity between two phases. From the experimental results, it is found that the two phase multiplier decreases with an increase in mass flux. Measured data of pressure drop are compared to a few available correlations proposed for macroscale and mini/microscale. The homogeneous model well predicted frictional pressure drop within MAE of 29.4 % for the test conditions considered in this work.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.11a
• /
• pp.177-183
• /
• 2007

Flow characteristics of the cylinder wake controlled with a small control cylinder were experimentally investigated by the PN (Particle Image Velocimetry) technique. Flow visualization of the flow around a circular cylinder was conducted in the Circulating Water Channel. The control cylinder having diameter of d=5mm, 10mm and 20mm was installed behind a circular cylinder of D=50mm. And the Reynolds number were $Re=4.9{\times}10^3,\;Re=9.9{times}10^3$ and $Re=1.9{\times}10^4$. In this study, the frequency characteristics of the controlled wake were analyzed by using spectral analysis of the measured wake velocity signals. As a result, the controlled wake had smaller vortex shedding frequency than that of circular cylinder wake by the effect of the control cylinder. Governing parameters of the flow control were d/D, and Reynolds number and they largely influenced the frequency characteristics of the cylinder wake. And vortex shedding frequency appeared most lowly at d=0.2D

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.6A
• /
• pp.438-449
• /
• 2012

This paper presents new CRC-p codes for VHF band maritime wireless communication system based on performance analysis of various CRC codes. For this purpose, we firstly describe the method of determination of undetected error probability and minimum Hamming distance according to variation of CRC codeword length. By using the fact that the dual code of cyclic Hamming code and primitive BCH code become maximum length codes, we present an algorithm for computation of undetected error probability and minimum Hamming distance where the concept of simple hardware that is consisted of linear feedback shift register is utilized to compute the weight distribution of CRC codes. We also present construction of transmit data frame of VHF band maritime wireless communication system and specification of major communication parameters. Finally, new optimal CRC-p codes are presented based on the simulation results of undetected error probability and minimum Hamming distance using the various generator polynomials of CRC codes, and their performances are evaluated with simulation results of bit error rate based on the Rician maritime channel model and ${\pi}$/4-DQPSK modulator.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.8B
• /
• pp.1012-1020
• /
• 2011

In this paper a design of $\pi$/4-DQPSK baseband receiver for the exchange of digital data and e-mail between shore and ship stations and/or among ship stations in the maritime mobile service VHF channels is described. Due to the permitted relatively big frequency instability of local oscillators at the transmitter and the receiver of maritime communication system, the designed baseband receiver should have the capabilities of correct estimation and compensation of the synchronization parameters, such as symbol timing and frequency offset, from the received signal which might include relatively big frequency error. Simulated BER results show that the designed baseband receiver works less than 0.5dB loss under AWGN channel when the normalized frequency offset of the received signal is more then 20%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.11
• /
• pp.1192-1200
• /
• 2014

This paper proposes a cooperative spectrum sensing algorithm in a maritime cognitive radio network and evaluates the performance of proposed algorithm. In the proposed algorithm, the secondary ships decide whether to transmit the feedback information or not on the basis of the threshold when the number of available feedback information of the ships is limited. The fusion ship detects whether the channel is available or not on the basis of the feedback information. This paper evaluates the proposed algorithm in terms of the detection probability and the number of secondary ships that are fed back in the maritime cognitive radio network. The simulation results show the proposed algorithm significantly reduces the feedback overhead even though the detection probability is somewhat declined.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.892-901
• /
• 2020

We used a numerical method to estimate the hydrodynamic maneuvering derivatives for the heave-pitch coupling motion of an underwater glider. It is very important to assess the hydrodynamic maneuvering characteristics of a specific hull form of an underwater glider in the initial design stages. Although model tests are the best way to obtain the derivatives, numerical methods such as the Reynolds-averaged Navier-Stokes (RANS) method are used to save time and cost. The RANS method is widely used to estimate the maneuvering performance of surface-piercing marine vehicles, such as tankers and container ships. However, it is rarely applied to evaluate the maneuvering performance of underwater vehicles such as gliders. This paper presents numerical studies for typical experiments such as static drift and Planar Motion Mechanism (PMM) to estimate the hydrodynamic maneuvering derivatives for a Ray-type Underwater Glider (RUG). A validation study was first performed on a manta-type Unmanned Undersea Vehicle (UUV), and the Computational Fluid Dynamics (CFD) results were compared with a model test that was conducted at the Circular Water Channel (CWC) in Korea Maritime and Ocean University. Two different RANS solvers were used (Star-CCM+ and OpenFOAM), and the results were compared. The RUG's derivatives with both static drift and dynamic PMM (pure heave and pure pitch) are presented.

• Ocean and Polar Research
• /
• v.31 no.1
• /
• pp.31-50
• /
• 2009

The demarcation of Maritime Boundary is directly related to the expansion of jurisdiction and the securing of resources. Resource diplomacies of the three countries Korea, China and Japan represent a major task for the national administrations : to secure resources as well as to stablize and sustain resources for future national economies. At the sea area around Korea as well, countries are fiercely competing to secure resources and to expand jurisdiction. This is evidenced by the fact that various principles and logics which are beneficial to each own country are presented through international precedents, agreement between countries and the theories of the international law scholars. They say that the conclusion of demarcation of maritime boundary for the Yellow Sea would be easy from the point that there is no dispute related to island dominion in the waters of the Korean Peninsula especially the Yellow Sea, but still we need to have a strategic approach to this issue from the point that the factors used for claiming maritime boundaries may expand the waters of a country over much. For example, the continental shelf boundary in consideration of the distribution of sedimentary deposits in the Yellow Sea which is being raised by China began from the hypothesis that the inflow of sedimentary deposits to the Yellow Sea through the rivers of China represents absolute majority, but the results of the latest studies raised questions on the hypothesis. Especially, the studies done by Martin and Yang revealed that the inflow of sedimentary deposits to the Yellow Sea from the Yellow River is approximately less than 1% of total sedimentary deposits in the Yellow Sea, and also the result of analysis on the causes and counter policy measures on the environment of Bohai, China supports the reliability of the results of such studies. From a legal aspect, the sedimentary deposits of rivers which are claimed by China represent extremely weak ground for the claim for the title of the continental shelf. The siltline claimed by China seems to be based on the Article 76-4-(a)(i) of UNCLOS. This is, however, not the definition on the title of the continental shelf but it is only a technical formula to utilize in a case where a country desires to expand the continental shelf to over 200 nautical miles. Scientific and Technical Guidelines of the Commission on the Limits of the Continental Shelf also confirm this point through the Article 2.1.2 of the Guideline. The only case in which sedimentary deposits of rivers were referred to as concrete demarcation of maritime boundary was in the which was concluded in 1986 between India and Myanmar at the Andaman Sea. In the said case, India acknowledged the boundary up to the isobath of 200m which Myanmar claimed based on the sedimentary deposits of the Irrawaddy River. It has limits as a case for acknowledging the sedimentary deposits, however, because in fact India's acknowledgment was made in exchange for the condition that Myanmar gave up the dominion of two islands which they had been claiming from India up until that time.