• 한국패류학회지
• /
• 제26권1호
• /
• pp.19-31
• /
• 2010

Seogundo is a small island adjacent to the southern coast of Jeju Island and connected to it by a boulder beach at low tide Surveys of this area were conducted from 2001 to 2009 to enumerate the mollusks there and also to examine their diversity, relative abundance, and ecological relationships. Both the boulder beach itself and several large tide pools were studied, including the coarse sand substrate and several species of seaweed and coralline algae found in the tide pools. Of the 121 species obtained or observed, there were 97 gastropods, 16 bivalves, and 8 polyplacophorans. Live specimens were obtained for about half of those species. About one third were found on rocky substrate, with the most common species being Nodilittorina radiata and Nerita japonica in the upper intertidal zone, N. radiata and Littorina brevicula in the middle intertidal, and Turbo (Lunella) coronata coreensis and Acanthopleura japonica in the lower intertidal and shallow subtidal. The seaweeds and coralline algae contained about 40% of all mollusk species. The most common mollusks in two species of brown seaweed were Ittibittum parcum, Musculus nanus, and Euplica scripta. In a species of red seaweed, Komaitrochus pulcher was the most frequent, as in the coralline algae, along with M. nanus. The coarse sand in the tidepools contained about 25% of the species, with the Cerithiidae having the largest number. A sample of beach drift contained 17 species, with Bittium aleutaceum and Rissoina (Phosinella) pura being most common. Most species, about 60%, were found in a variety of habitats, especially the marine flora; few species exhibited any habitat preferences. Biographically, Jeju Island is part of the Warm Temperate Northwest Pacific Province and the East China Sea ecoregion with a strong faunal affinity with southern Japan, eastern China, and northeastern Taiwan. Zonal-geographical groupings reveal that the fauna is mainly subtropical-low boreal, preferring moderately warm water, with a somewhat smaller number of tropical-subtropical species.

• 한국해양환경ㆍ에너지학회지
• /
• 제8권3호
• /
• pp.122-133
• /
• 2005

동해 남부 연안에 위치한 나아해빈을 대상으로 태풍(매미)에 의한 해빈영향을 파악하기위하여 태풍 전 후의 표층 퇴적물조성, 해빈의 해안선 및 단면변화를 관측하였다. 그 결과 해빈의 후빈(backshore)에서는 자갈량이 감소하고 사질함량이 증가하였고, 해빈 전 지역이 침식, 평탄화 되었다. 해저지형변화는 태풍 후 퇴적층 두께 약 4 m까지 침식을 일으키고, 이런 영향은 수심 약 10 m까지 달하며, 해안선은 약 12 m까지 후퇴한 것으로 나타났다. 이것은 해빈에 태풍이 영향을 미칠 때, 높은 파고를 가진 파랑은 해빈의 저부 또는 외해의 저층에 까지 침식작용을 일으키고, 해빈의 상부는 광범위하게 침식된 후 사질로 구성된 퇴적물들이 재퇴적된 것에 기인하는 것으로 생각된다.

• 한국수산과학회지
• /
• 제46권5호
• /
• pp.638-648
• /
• 2013

To understand the geochemical characteristics of intertidal sediment in a semi-enclosed bay, we measured various geochemical parameters, including grain size, ignition loss (IL), chemical oxygen demand (COD), acid volatile sulfide (AVS), and trace metals (Al, Fe, Cu, Pb, Zn, Cd, Hg, and As), in intertidal sediment from three bays (Deukryang Bay, Yeoja Bay, and Gamak Bay) in the southern region of Jeollanam Province. The intertidal sediment in Deukryang Bay consisted of various sedimentary types, such as sand, gravelly muddy sand, mud, and silt, whereas the intertidal sediments in Yeoja and Gamak Bays were composed mainly of mud. The concentrations of IL, COD, AVS and trace metals in the intertidal sediments of the three study regions were relatively high near areas affected by input of stream waters and/or shellfish farming waste. The concentrations of organic matter and trace metals in Gamak Bay were much higher than those in Deukryang and Yeoja Bays, which appears to be due to the influence of anthropogenic pollutants, originating from the city and the industrial complex near Gamak Bay. The evaluation results of organic matter and metal pollution using the sediment quality guidelines showed that the intertidal sediments in the three study regions were not polluted in terms of organic matter and trace metals. In future, sustainable management for sources of organic matter and trace metal is necessary to conserve a healthy benthic ecosystem in intertidal sediments.

• Ocean and Polar Research
• /
• 제29권2호
• /
• pp.123-134
• /
• 2007

Distribution patterns of sandy bottom macrobenthic communities were studied around the Hupo coastal area. The seasonal surveys were conducted at 15 chosen sites within a depth range of 10 to 50 m along 10 km of the coastline using a Smith-McIntyre grab $(0.05\;m^2)$ in 2005. Overall depth distribution following the direction of the offshore become deeper parallel to the coastline. A total of 319 macrobenthic species were sampled with a mean density of $1,972\;ind./m^2$, and mean biomass was 82.5 wet-weight $g/m^2$. The major individual-dominant species were three polychaetes Spiophanes bombyx ($436\;ind./m^2$), Scoletoma longifolia ($250\;ind./m^2$) and Magelona japonica ($170\;ind./m^2$), and bivalve Adontorhina subquadrata ($73\;ind./m^2$). Cluster analysis and non-metric multidimensional scaling (nMDS) analysis based on Bray-Curtis similarity identified 2 major station groups which corresponded to macrobenthic faunal assemblages and their characteristic species. In addition, environmental conditions were significantly different between station groups. Group I contained mostly 20 and 50 m deep sites and was associated with sandy mud. Group I was characterized by high abundance of S. bombyx, S. longifolia, A. subquadrata. It was divided into two sub-groups (I-I and I-II) in relation to depth. Sub-group I-I was associated with deeper sites than sub-group I-II. Group II included mostly inshore area shallower than 15 m and was associated with coarse and medium sand. Group II was characterized by Lumbrinerides hayashii and Urothoe grimaldii japonica.

• Journal of Welding and Joining
• /
• 제31권2호
• /
• pp.57-62
• /
• 2013

Magnesium has good castability and limited workability, so its products have been manufactured by almost casting processes. In this study, a pulsed Nd:YAG laser was used to butt-weld the sand casting magnesium alloys. And the effect of welding conditions such as peak power, pulse width, welding speed was evaluated in detail. As a result of this study, large underfill and plenty of spatter taken place under the conditions with high peak power. Thus, it is recommended to use low peak power and long pulse width to obtain good welds with deep penetration. It is also confirmed that the welding speed and pps(pulse per second) are directly connected at weld defects such as underfill, porosity.

• Journal of Welding and Joining
• /
• 제31권2호
• /
• pp.63-68
• /
• 2013

Magnesium alloys have gained increased attention in recent years as the structural materials, because of their attractive properties such as good specific strength, excellent sound damping capability. However, to expand their applications, a reliable joining process is absolutely necessary. In this study, a CW fiber laser was used to investigate the lap weldability of sand casting and wrought magnesium alloys. The effect of defocused distance on lap weldability was examined, and it was found that spatters always generated at the around focused distance because of the high power density of the laser beam. Thus, defocused distance was required to obtain sound welds. In addition, the application of fillet welding was evaluated for minimizing the affect of sand casting magnesium alloy that have relatively poor weldability. As a result of this study, we could confirm good weldability without weld defects.

• Geomechanics and Engineering
• /
• 제28권6호
• /
• pp.585-598
• /
• 2022

The monopile-friction wheel hybrid foundation is an innovative solution for offshore structures which are mainly subjected to large lateral eccentric load induced by winds, waves, and currents during their service life. This paper presents an extensive numerical analysis to investigate the lateral load and moment bearing performances of hybrid foundation, considering various potential influencing factors in sand-overlaying-clay soil deposits, with the complex lateral loads being simplified into a resultant lateral load acting at a certain height above the mudline. Finite element models are generated and validated against experimental data where very good agreements are obtained. The failure mechanisms of hybrid foundations under lateral loading are illustrated to demonstrate the effect of the friction wheel in the hybrid system. Parametric study shows that the load bearing performances of the hybrid foundation is significantly dependent of wheel diameter, pile embedment depth, internal friction angle of sand, loading eccentricity (distance from the load application point to the ground level), and the thickness of upper sandy layer. Simplified empirical formulae is proposed based on the numerical results to predict the corresponding lateral load and moment bearing capacities of the hybrid foundation for design application.

• 수산해양교육연구
• /
• 제29권1호
• /
• pp.148-157
• /
• 2017

This study has studied the phenomenon exclusive to the activity of skin scuba among marine sports in Busan region, and such empirical studies are for the development of skin scuba, and even of the entire marine sports, and in order to achieve such objective, the study method centered around qualitative study method of in-depth interview, participatory observation, and documentation study, the results of which are as follows. First is the advantage of the local environment as an open-water location. This study area has beaches of pebbles, and the underwater is also comprised of pebbles up to a certain distance, securing a superior underwater visibility compared to the sand of other Busan regions, and such local environment is thought to be an advantage of skin scuba activity. Second is the satisfaction of accessibility. This study area had an advantage in participant accessibility, which is thought to act as a good strength for the marine sports development of this area in the future. Third is the satisfaction of education. The club instructors of this study area had various marine sports-related licenses such as skin scuba, along with marine lifeguard trainer qualifications to prepare against safety accidents, which are also thought to have positive influences on the education satisfaction for beginners. Fourth is the inconvenient subsidiary facility. This study area has great natural environment for open waters, but the subsidiary facilities of the club for skin scuba activity was found to be very inconvenient by this study, and for the future development of skin scuba, the improvement of subsidiary facilities should be considered. Fifth is the inconvenient parking facilities. The participants in this study area agreed upon the inconvenience of the parking issue alongside the subsidiary facilities. There are always parking issues near the coasts of Busan region, and in order to resolve such issues, active assistance from the City of Busan and each local government, and if such methods are well proposed, the conflict between the marine sports participants and local residents shall be resolved, it would play a great role in the development of marine sports.

• 한국해양공학회지
• /
• 제21권3호
• /
• pp.26-32
• /
• 2007

A series of large-scale experiments were carried out in order to examine wave-induced liquefaction in a loosely packed sandbed, its afterward high densification and liquefaction by oscillatory pore pressure. The experiments were conducted in a Large Hydro-Geo Flume that can nearly solve the problems of scale effects of the sandbed, and the 50% sieve diameter of sand was 0.2 mm. The generation of residual pore pressure and its afterward high densification which had observed by Takahashi et al. (1999) in a wave flume experiment using fine sand with the size of 0.08 mm. As a result, the relative density of the sandbed after high densification was increased up to 79% and liquefaction by oscillatory pore pressure was not observed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표회 논문집(I)
• /
• pp.211-216
• /
• 1998

Recently the shortage of good aggregate has encouraged the use of sea sand in construction field, and the corrosion damage of the reinforced steel in concrete structures has been increased due to chlorides from sea sand and deicing salt. Therefore, a number of researchs are proceeding to prevent the corrosion of the reinforced steel in concrete, especially in marine environments. This study focused on the effect of corrosion inhibitors to evaluate protection characteristics for mortar specimens containing clorides. Corrosion behaviors have been investigated by half-cell potential measurement, linear polarization method, AC impedance method, and cyclic polarization test after immersing in sea water for 7 years. A possitive effect of a corrosion inhibitor has been obtained.