• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.53 no.3
• /
• pp.368-381
• /
• 2020

This study was conducted to optimize the processing conditions of seasoned laver Pyropia yezoensis with conger eel Conger myriaster seasoning sauce (CES) using response surface methodology (RSM). The RSM program results for bonesoftness showed that the optimum independent variables based on the dependent variables (Y₁, lipid removal rate; Y₂, texture; and Y₃, sensory fish odor score) were 431.0% for X₁ (water amount), 115.6℃ for X₂ (retort-operated temperature), and 50.1 min for X₃ (retort-operated time). The RSM program results for the CES blend showed that the optimum independent variables (X₁, amount of bone-softened conger eel by-products; X₂, mixed sauce amount; and X₃, starch amount) based on the dependent variables (Y₁, amino-N; Y₂, Hunter redness; and Y₃, drying time) were 44.8% for A (pre-treated conger eel by-product), 36.0% for B (mixed sauce), and 19.2% for C (starch). The RSM program results for seasoned laver with CES showed that the optimum independent variables based on the dependent variables (Y₁, water activity; Y₂, Hunter yellowness; and Y₃, overall acceptance) were 5.0% for X₁, (CES amount), 313.8℃ for X₂ (roasting temperature), and 6.0 s for X₃ (roasting time). The seasoned laver with CES prepared under the optimum conditions was superior to commercial seasoned laver in terms of overall acceptance.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.10
• /
• pp.1323-1329
• /
• 2008

For the development of new products using salmon, development of seasoned salmon powder was attempted and its characteristics were also examined. In the seasoned salmon powder prepared in this experiment (product P), the proximate composition was 42.1% moisture, 30.3% protein, 18.9% lipid, and 6.2% ash, and the Hunter color value showed 68.14 for the lightness, 7.86 for the redness, 19.13 for the yellowness and 35.12 for the color difference. TCA soluble-N content of product P was 360 mg/100 g, which is higher than that of commercial product (234 mg/100 g). In taste values, total value was 2.2 times higher in product P than in commercial product, and their major free amino acid was only glutamic acid. In both product P and commercial product, the major fatty acids were 16:0, 18:1n-9, 18:2n-6, and 22:6n-3. Total content of amino acid was higher in the product P (29.05 g/100 g) than in commercial product (20.79 g/100 g), and their major amino acids were aspartic acid, glutamic acid, leucine, and lysine. The results of sensory evaluation on the taste, color, and flavor showed that product P was superior to commercial product.

• Journal of Life Science
• /
• v.25 no.11
• /
• pp.1273-1279
• /
• 2015

Agarase from a novel agar-degrading bacterium isolated from seawater in Namhae at Gyeongsangnamdo province of Korea was characterized. The SH-1 strain was selected from thousands of colonies on Marine agar 2216 media. Almost full 16S rRNA gene sequence of the agarolytic SH-1 strain showed 99% similarity with that of bacteria of Simiduia genus and named as Simiduia sp. SH-1. Agarase production was growth related, and activity was declined from stationary phase. Secreted agarase was prepared from culture media and characterized. It showed maximum activity of 698.6 units/L at pH 7.0 and 30℃ in 20 mM Tris-HCl buffer. Agarase activity decreased as the temperature increased from an optimum of 30℃, with 90% and 75% activity at 40℃ and 50℃, respectively. Agarase was not heat resistant. Slightly lower agarase activity was observed at pH 6.0 than at pH 7.0, without statistical difference, and 80% and 75% activity were observed at pH 5.0 and 8.0, respectively. Neoagarotetraose and neoagarobiose were the main final products of agarose, indicating that it is β-agarase. Simiduia sp. SH-1 and its β-agarase would be useful for the industrial production of neoagarotetraose and neoagarobiose, which have a whitening effect on skin, delaying starch degradation, and inhibiting bacterial growth.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.7
• /
• pp.1036-1040
• /
• 2005

Near-infrared reflectance spectroscopic (NIRS) calibrations were developed for accurate and fast prediction of whole broiler chicken carcass composition. The Feed and Forage Foss systems Model 5000 Reflectance Transport Model 5000 with near-infrared reflectance spectroscopy (NIRS)-WinISI II windows software was used for this purpose. One equation was developed for the prediction of each carcass component. One hundred and fifty freeze dried broiler whole carcass samples were ground in a Cyclotech 1,093 sample mill and analyzed for dry matter, protein, fat, calcium and phosphate. Samples were divided into two sets: a calibration set from which equations were derived and a prediction set used to validate these equations. The chemical analysis values (mean${\pm}$SD) were calculated based on dry matter basis as follows: dry matter: 33.41${\pm}$2.78 (range: 26.41-43.47), protein: 54.04${\pm}$6.63 (range: 36.20-76.09), fat 35.44${\pm}$8.34 (range: 7.50-55.03), calcium 2.55${\pm}$0.65 (range: 0.99-4.41), phosphorus 1.38${\pm}$0.26 (range: 0.60-2.28). One hundred and three samples were used to calibrate the equations and prediction values. The software used was modified to obtain partial least square regression statistics, as it is the most suitable for natural products analysis. The coefficients of determination ($R^2$) and the standard errors of prediction were 0.82 and 1.83 for the dry matter, 0.96 and 1.98 for protein, 0.99 and 1.07 for fat, 0.90 and 0.30 for calcium and 0.91 and 0.11 for phosphorus, respectively. The present study indicated that NIRS can be calibrated to predict the whole broiler carcass chemical composition, including minerals in a rapid, accurate, and cost effective manner. It neither requires skilled operators nor generates hazardous waste. These findings may have practical importance to improve instrumental procedures for quick evaluation of broiler carcass composition.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.3
• /
• pp.148-153
• /
• 2006

This study dealt with the measurement of exhausted gas concentration, the estimation of a combustion efficiency, and the review of IMO indexing. We concentrated on establishing the basic data to take a counterplan coping with $CO_2$ regulations. The average combustion efficiency was 98% in shop test of new engines and 96.5% in sea trial test of new ships, respectively. It would become lower for the old engine or/and ship. High combustion efficiency results in high $CO_2$ emission and low combustion efficiency results in high emission of incomplete combustion products. The efficient method reducing $CO_2$ emission without an increase in noxious air pollutants would be the development of a substitute fuel and the fuel-efficient and economical engine, and the fair play among shipping agencies in a ship speed. In reviewing of IMO indexing, it is necessary to begin by analyzing the carbon content of a marine fuel for a precise estimates.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.279-282
• /
• 2015

Fisheries development of the basic law pursuant to article 15 (marine safety management, etc.) one of maritime safety and maritime traffic facilities nationwide network of DGPS in accordance with the building maximize infrastructure utilization and country. Source technology has been improving steadily raised for the benefit daegukmin. In particular, look at the type of product for the marine supply medium-wave receiver Performance products that satisfy most of the IMO Advisory. The antenna and receiver are separate structural supply for some integrated model with a very high Rather it is used as a portable receivers for marine positioning cheap integrated model development is needed. Correction of satellite navigation receivers for the current Marine GPS module, medium-wave modules can be developed one low cost Integrated in independent operating environments do not support the model development done look at what the problem is 285kHz ~ 315kHz in DGPS Beacon receiver structure using a medium wave or Beacon The medium-wave antenna and a GPS receiver signal to noise ratio was studied GPS signal attenuation on the DGPS performance looked at each GPS manufacturer medium-wave signal-to-noise ratio and normalized impact by GPS manufacturers noise power ratio per bandwidth for medium-wave GPS signals affect it was implemented to improve performance.

• Korean Journal of Food Science and Technology
• /
• v.33 no.5
• /
• pp.534-539
• /
• 2001

To utilize oyster cannery processing waste water effectively, this study was carried out to prepare instant powdered soup using oyster wash water. Instant powdered soup from oyster hot-water extracts (HWE) was prepared by mixing oyster spray-dried hot-water extracts (15 g) with table salt (5 g), cream powder (19 g), milk replacer (12 g), wheat flour (20 g), corn flour (15 g), starch (5 g), glucose (7.5 g) and onion powder (1.5 g). In preparing instant powdered soup from oyster wash water (OWW), powder from oyster spray-dried wash water instead of the spray-dried hot water extracts, was added and other additives were added in proportion to those in the HWE. The OWW consists mainly of carbohydrates (71.1%). It was not different from the instant powdered soup from hot-water extracts. The volatile basic nitrogen, vaible cell counts, coliform group of instant powdered soup from oyster wash water contains 29.4 mg/100g, $4.6{\times}10^4\;CFU/g$, <18 MPN/100g, respectively and its water activity has 0.246. So it was a hygienically safe and conservable instant food. The main fatty acid of OWW was 16 : 0 and 18 : 1n-9. Its chemical score of protein was 59.4% and its main inorganic matter was iron. According to a sensory evaluation, in contrast to the HWE, the OWW had a slightly lower aroma but better taste. It was concluded from the above chemical and sensual evaluation that the oyster wash water can be used as a flavor enhancer for instant powdered soup.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.4
• /
• pp.327-333
• /
• 2016

Reinforced concrete structures have found wide usage in land and maritime applications. However, the corrosion of reinforced concrete has been recognized as a serious problem from economic and safety standpoints. In previous studies, the corrosion behavior of the inner steel bar embedded in mortar (W/C: 0.4, 0.5) was investigated using electrochemical methods. In this study, multiple mortar test specimens (W/C: 0.6) with six different cover thicknesses were prepared and immersed in flowing seawater for five years. Subsequently, equations related to the cover thickness, period of immersion, and corrosion characteristics of the embedded steel bar were evaluated using electrochemical methods. Prior to immersion, the corrosion potentials indicated an increase with increasing cover thickness, and after five years, all corrosion potentials demonstrated a trend in the positive direction irrespective of the cover thickness. However, the relationships between the corrosion potential and cover thickness were not in complete agreement. Furthermore, after five years, all of the corrosion potentials indicated values that were nobler compared to those obtained prior to immersion, and their corrosion current densities also decreased compared to their values obtained prior to immersion. It was considered that the embedded steel bar was easily corroded because of the aggression of water, dissolved oxygen, and chloride ions; a higher W/C ratio also assisted the corrosion process. The corrosive products deposited on the surface of the steel bar for five years cast a resistance polarizing effect shifting the corrosion potential in the nobler direction. Consequently, it was considered that the W/C ratio of 0.6 showed nearly same results as those of W/C of 0.4 and 0.5. Therefore, the corrosion potential as well as various parameters such as the cover thickness, period of immersion, and W/C ratio must be considered at once for a more accurate evaluation of the corrosion property of reinforced steel exposed to marine environment for a long period.

• Food Engineering Progress
• /
• v.22 no.4
• /
• pp.337-343
• /
• 2018

Coffee is a commonly consumed beverage that contains anti-inflammatory compounds such as caffeine, chlorogenic acid, cafestol, trigonelline, and kahweol. Lactobacillus plantarum is a lactic acid bacterium most frequently used in the fermentation of food products of plant origin. L. plantarum is able to degrade some food phenolic compounds and provide high value-added compounds such as powerful antioxidants or food additives approved as flavouring agents. In this study, we investigated the anti-inflammatory effects of coffee extract fermented by L. plantarum on RAW264.7 macrophages. In lipopolysaccharide-stimulated RAW264.7 cells, these coffee extracts exhibited anti-inflammatory activities through the reduction of nitric oxide (NO) production and inducible NO synthase expression. Fermented coffee extracts significantly decreased the expression of inflammatory cytokines such as tumor necrosis factor ${\alpha}$, interleukin $1{\beta}$, interleukin 6, and interferon ${\gamma}$. Cyclooxygenase-2, which is one of the key biomarkers for inflammation, was significantly suppressed. These results might be helpful for understanding the anti-inflammatory mechanism of fermented coffee extract on immune cells and, moreover, suggest that fermented coffee extract may be a beneficial anti-inflammatory agent.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.1
• /
• pp.112-125
• /
• 2021

Marine spatial planning(MSP) designates the marine as nine kinds of use zones for the systematic and rational management of marine spaces. One of them is the fishery protection zone, which is necessary for the sustainable production of fishery products, including the protection and fosterage of fishing activities. This study intends to quantitatively identify the fishing activity space, one of the elements necessary for the designation of fisheries protection zones, by mapping of fishery activities using V-Pass data and deriving the fishery activity concentrated zone. To this end, pre-processing of V-Pass data was performed, such as constructing a dataset that combines static and dynamic information, calculating the speed of fishing vessels, extracting fishing activity points, and removing data in non-fishing activity zone. Finally, using the selected V-Pass point data, a fishery activity map was made by kernel density estimation, and the concentrated space of fishery activity was analyzed. In addition, it was confirmed that there is a difference in the spatial distribution of fishing activities according to the type of fishing vessel and the season. The pre-processing technique of large volume V-Pass data and the mapping method of fishing activities performed through this study are expected to contribute to the study of spatial characteristics evaluation of fishing activities in the future.