• Geophysics and Geophysical Exploration
• /
• v.22 no.2
• /
• pp.62-71
• /
• 2019

We conducted DC resistivity and MT survey to obtain the resistivity structure of the central Myanmar basin. We tried to analyze the underground structure through the resistivity variation of Myanmar by performing representative geophysical survey methods because researches on the electrical resistivity structure are insufficient in Myanmar. The electrical resistivity is expected to be low considering the marine sedimentary rocks composed of shale and sandstone in this area. The DC resistivity and MT survey were carried out using SmartRho of Geolux Co., Ltd. and MTU-5A of Phoenix geophysics Ltd., respectively, to visualize the electrical resistivity structure of study area. DC resistivity and MT survey showed an electrical resistivity less than dozens of ohm-m within the depth of 100 m. In particular, MT survey data were almost similar to TM and TE modes in the frequency range above 1 Hz. The two-dimensional inversion of MT data showed a subsurface structure with low resistivity below 150 ohm-m divided into east-west direction. We confirmed that the inversions of DC resisitivity and MT data along an overlapped survey line represented similar results. In the future, considering the high electrical conductivity, it would be effective to perform DC resistivity and MT survey simultaneously to study the electrical resistivity structure of the central Myanmar basin.

• Journal of the Korean Geophysical Society
• /
• v.6 no.1
• /
• pp.31-38
• /
• 2003

Multi-channel seismic survey, which has been mainly employed in oil prospecting, is carried out as a high resolution shallow marine seismic exploration. Fault drop as small as 1 m can be resolved by employing high-resolution seismic survey. Similar to the effect of shallow inhomogenities in the land seismic data, due to occurrence of swell quite often higher than 1 m, shallow marine seismic data tend to be severely degraded. Suppression of such a swell effect is critical in processing of steps of marine seismic shallow high-resolution data. Compared to the moving average depth method, a newly developed method using cross-correlation technique is found out to be very effective in increasing the resolution of the shallow reflection events by accuratly elucidating the depth of sea bottom.

• Economic and Environmental Geology
• /
• v.41 no.2
• /
• pp.219-223
• /
• 2008

Many cross-over errors due to position errors, meter errors, observation errors, sea conditions and so on occur when marine geophysical data collected by own and other agencies are merged, and these errors can create artificial anomalies which cause an improper interpretation. Many methods have been introduced to reduce cross-over errors. However, most methods are designed to compare each point or segment data to find cross-over points, and require a long processing time. Therefore, FORTRAN program (FastXcorr) is presented to fast determine cross-over points using an overlap-sector, and to adjust cross-over errors using a weighted linear interpolation algorithm.

• Economic and Environmental Geology
• /
• v.43 no.4
• /
• pp.343-348
• /
• 2010

Gravity anomalies observed in shipborne survey are usually distorted by bad weather conditions and unexpected vessel movement. These distorted data should be removed because they may mislead the data interpretation. However, it is not possible to perfectly remove all erroneous data. Cross-over point correction, which is generally used, only reduces the errors at cross-over points, and thus the data still contain error values. To resolve this drawback, Rauch-Tung-Striebel(RTS) filter was adopted to minimize all errors in the data and at cross-over points. After applying this method, the range of anomaly variation is reduced from 15 mGal to less than 2 mGal, and errors at the cross-over points are minimized from 4.21 mGal to 2.95 mGal. The results imply that RTS filter is very useful to reduce errors in the data and corss-over points.

• Journal of the Korean Geophysical Society
• /
• v.9 no.4
• /
• pp.351-359
• /
• 2006

We investigated subsurface structures of the Bransfield Basin, the Antarctic with AUH (Autonomous Underwater Hydrophne) which was designed to record abyssal T-waves generated from submarine earthquakes. The data obtained from a multi-channel seismic survey and an AUH were used for this study. A seismic reflection method was applied to the multi-channel seismic survey data in order to identify bathymetry and sedimentary structures, and the signals recorded in the AUH were used to obtain deep structures as we applied a seismic refraction method. Even though we couldn’t investigate deeper and detailed structure in study area because of lack of Airgun’s capacity, the AUH showed possibilities for being used for a marine seismic survey. From this experiment, we decided the upper and lower sediment layer velocities, detected irregular basement topography probably caused by submarine volcanic/magmatic activities, and retrieved the velocity of the basement and the depth of the sediment layer/basement boundary.

• Ocean and Polar Research
• /
• v.24 no.3
• /
• pp.179-187
• /
• 2002

The Ayu Trough, located in the southern end of the Philippine Sea, represents a divergent boundary between the Philippine Sea and the Caroline Plates. A detailed geophysical survey was carried out in the Ayu Trough by R/V Onnuri. Topographically, the Ayu Trough resembles an slow spreading ridge. The trough can be divided into three sections: the south $(0^{\circ}-1^{\circ}30'N),\;middle\;(1^{\circ}30'-4^{\circ}N)$, and north $(4^{\circ}-6^{\circ}30'N)$. The seafloor in the middle section is characterized by features asymmetric with respect to the axis. These features were probably produced by NW-SE and NNW-SSE extensions and seem to support the argument that the opening of the Ayu Trough occurred in an oblique fashion. Farther south, a long transform fault but with a short offset defines the boundary between middle and southern sections. The axial depth increases a stepwise to the south of $1^{\circ}30'N$. A clear difference can be seen between the southern and middle sections with the latter exhibiting much higher mantle Bouguer anomaly values in the axial region. The anomaly indicates that the axial crust perhaps experienced a much higher degree of extension in the middle than in the southern section. The analyses of magnetic field data reveal that the region beyond 100km exhibits considerable variations, whereas the magnetic anomalies within 100km from the trough axis are very much subdued. This observation suggests that the opening of the Ayu Trough involved an initial stage of rifting of existing volcanic arcs, followed by production of new seafloor.

• Geophysics and Geophysical Exploration
• /
• v.20 no.1
• /
• pp.43-48
• /
• 2017

The applicability of refraction survey has been tested using a wave glider widely used in long-term ocean observations around the world. To record seismic refractions, a single channel streamer with metal weight and a seismic recording system were mounted on the wave glider. We used GPS precise time synchronization signal and radio frequency (RF) communication to synchronize shot and recorder triggers and to control acquired data quality in real time. When the wave glider is positioned close to the set point, a 2,000 J sparker is exploded along the designed track at 2 second intervals. Through the test survey, we were able to successfully acquire refractions from the subsurface.

• Geophysics and Geophysical Exploration
• /
• v.7 no.1
• /
• pp.1-6
• /
• 2004

High-resolution S-wave reflection surveying has been successfully conducted on paved areas using a Land Streamer originally designed by the author. The main feature of the Land Streamer tool is the non-stretch woven belt on which geophone units are mounted to form a multichannel geophone array similar to a marine streamer. Because it is easily towed by a vehicle or by hand, the tool leads to high performance in field measurements and resultant cost-effectiveness of high-resolution reflection surveys. Although each geophone unit is coupled to the pavement through a metallic baseplate instead of being firmly planted in the ground, the Land Streamer tool provides comparatively clean data, unaffected by traffic noise even on the pavement. Thus, the tool is capable of expanding the opportunity for S-wave reflection surveys in urban areas where many surfaces are paved and traffic noise is severe. A series of high-resolution S-wave reflection surveys on paved areas delineated detailed structures of surface layers shallower than 60 m, and proved the wide applicability of the tool to engineering, environmental applications, and earthquake disaster prevention projects.

• Geophysics and Geophysical Exploration
• /
• v.13 no.4
• /
• pp.336-348
• /
• 2010

The Single-channel seismic survey with the source of bubble pulser and drilling survey was carried out in 2008 and 2009 for the site survey of Daecheon-Wonsando area, which was a proposed area of Korea-China subsea tunnel. The goal of this study is to analyze the depth and characteristics of acoustic basement for the stability assessment and tunnel design in this proposed area through combining drilling data with this single-channel seismic data after detailed processing. For this purpose, among the data processing schemes which are usually applied to multi-channel seismic data, we applied the F-K filtering to eliminate the AC(alternating current) noise and the post-stack depth migration to produce depth section. As a result, we verified that the improved depth section could be obtained from single-channel seismic data, and the distribution and characteristics of basement could be analyzed in survey area through the combined analysis with drilling data. However, we could not interpret the detailed structures, fault and fracture zone, due to the quality of bubble pulser source and single-channel data. We expect that those detailed structures can be analyzed when higher resolution seismic data is provided. Therefore, we recommend some items for future seismic survey of subsea tunnel to obtain the high resolution seismic data.

• Geophysics and Geophysical Exploration
• /
• v.11 no.1
• /
• pp.60-67
• /
• 2008

In this paper we consider an application of the method of electromagnetic (EM) migration to the interpretation of a typical marine controlled-source (MCSEM) survey consisting of a set of sea-bottom receivers and a moving electrical bipole transmitter. Three-dimensional interpretation of MCSEM data is a very challenging problem because of the enormous number of computations required in the case of the multi-transmitter and multi-receiver data acquisition systems used in these surveys. At the same time, we demonstrate that the MCSEM surveys with their dense system of transmitters and receivers are extremely well suited for application of the migration method. In order to speed up the computation of the migration field, we apply a fast form of integral equation (IE) solution based on the multigrid quasi-linear (MGQL) approximation which we have developed. The principles of migration imaging formulated in this paper are tested on a typical model of a sea-bottom petroleum reservoir.