• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.11a
• /
• pp.116-118
• /
• 2023

In recent years, the need for economical and sustainable ship routing has emerged due to the enforced regulations on environmental issues. Despite the development of weather forecasting technology, maritime accidents by rough waves have continued to occur due to incorrect weather forecasts. In this study, onboard measurements are conducted to observe the acutal situation on merchant ships in operation encountering rough waves. The types of measured data include information related to navigation (Ship's position, speed, bearing, rudder angle) and engine (engine revolutions, power, shaft thrust, fuel consumption), weather conditions (wind, waves), and ship motions (roll, pitch, and yaw). These ship experiments was conducted to 28,000 DWT bulk carrier, 63,000 DWT bulk carrier, 20,000 TEU container ship, and 12,000 TEU container ship. The actual ship experiment of each ship is intended to acquire various types of data and utilize them for multi-objective studies related to ship operation. Additionally, in order to confirm the sea conditions, the directional wave spectrum was reproduced using a wave simulation model. Through data collection from ship experiments and wave simulations, various studies could be proceeding such as the measurement for accurate wave information by marine radar and analysis for cargo collapse accidents. In addition, it is expected to be utilized in various themes from the perspective of safety and efficiency in ship operation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.6
• /
• pp.672-680
• /
• 2023

Weight is a critical factor in the ship design process given that it has a substantial impact on the hydrodynamic performance of ships. Typically, ships are optimally designed for specific conditions with a fixed draft and displacement. However, in reality, weight and draft can vary within a certain range owing to operational activities, such as fuel consumption, ballast adjustments, and loading conditions . Therefore, we investigated how resistance changes under three different loading conditions, namely overload, design-load, and lightship, for small craft, using both model experiments and numerical simulations. Additionally, we examined the sensitivity of weight changes to resistance to enhance the performance of ships, ultimately reducing power requirements in support of the International Maritime Organization's (IMO) goal of reducing CO2 emissions by 50% by 2050. We found that weight changes have a more significant impact at low Froude Numbers. Operating under overload conditions, which correspond to a 5% increase in draft and an 11.1% increase in displacement, can lead to a relatively substantial increase in total resistance, up to 15.97% and 14.31% in towing tests and CFD simulations, respectively.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.4
• /
• pp.183-189
• /
• 2024

Against the backdrop of IMO's stricter environmental regulations due to global warming, Europe's Fit for 55 plan, and other initiatives, the establishment of infrastructure for the supply of environmentally friendly marine fuels and policy analysis are more critical than ever. This study comprehensively analyzes existing research and policies on the supply of environmentally friendly marine fuels, as well as trends in regulations, industry responses, and the current status of infrastructure for the supply of environmentally friendly fuels, to draw insightful conclusions. The results show that the establishment of infrastructure for the supply of environmentally friendly fuels is as important as the introduction of environmentally friendly ships, due to the strengthening of environmental regulations. LNG is a viable option in the short term, but a transition to carbon-free fuels is necessary in the long run. In this regard, a strategic approach is needed to focus support on fuels that are advantageous to produce, considering domestic industrial conditions from a long-term perspective. Therefore, the government should actively promote infrastructure development through measures such as supporting the development and supply of environmentally friendly fuels, improving regulations and providing incentives, attracting private investment, and strengthening international cooperation. This study is expected to serve as a valuable resource for setting policy directions for the transition to an environmentally friendly maritime industry. Future research will include a comparative analysis of the economic viability of environmentally friendly fuels and basic research on the selection of fuels that are advantageous to Korea.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.2
• /
• pp.165-175
• /
• 2024

Hydrogen is being touted as one of the energy sources to combat the climate change crisis. However, hydrogen can leak into enclosed spaces, rise to the ceiling, accumulate, and cause fires and explosions if it encounters an ignition source. In particular, ships that transport hydrogen or use it as a fuel comprise multiple enclosed spaces. Therefore, the dif usion characteristics within these spaces must be understood to ensure the safe use of hydrogen. The purpose of this study is to experimentally determine the diffusion characteristics of helium, which has similar properties to hydrogen, in a closed space on board a ship, and to determine the change in the oxygen concentration along the leakage direction as the air change per hour(ACH) increases to 25, 30, 35, 40, and 45 through CFD simulation. The study, results revealed that the oxygen concentration reduction rate was 2% for leakage in the -z direction and 1% for leakage in the +x and +z directions, and the ventilation time was 15 min 30 s for leakage in the -z direction, 7 min for leakage in the +x direction, and 9 min for leakage in the +z direction, showing that differences existed in the oxygen concentration and ventilation time depending on the leakage direction. In addition, no significant difference was observed in the rate of oxygen concentration reduction and ventilation time in all leakage directions from the ACH of 35 and above in the experimental space. Therefore, because the oxygen concentration and ventilation time were not improved by increasing the ACH, 35 was noted as the optimal ACH in this experimental environment.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.50 no.4
• /
• pp.487-494
• /
• 2014

This study describes the result on PV system for evaluating the performance of small fishing boats. Photovoltaic system with 200 watts power generation facilities on the 3-ton fishing boat was carried. Load test was performed on the condition that the work lamps lit during night operations. As a result the performance can be used for more than two hours at 60 watt work lamps. The load test was performed on the condition that fishing vessels are on the cruising condition at sea. The solar power systems have been investigated as a power generation efficiency of about 36.55%. Additional tests show that the power generation efficiency is difficult to expect a maximum of 50% or more. Fuel consumption of fishing boats by installing a solar power system is reduced. Also the PV system is useful for the verification of their availability for fishing vessels as well as the satisfaction of the fishermen. The results for the durability of the photovoltaic device is acceptable, including a solar panel, controller and the performance exhibited no breakage in the harsh marine environment or failure so far. The installed PV system was confirmed that the durability with at least 2 years.

• Journal of Power System Engineering
• /
• v.15 no.1
• /
• pp.24-31
• /
• 2011

Rectangular box type structures are used in many fields of civil, mechanical and marine engineering. Especially, Most ship structures are often in contact with inner or outer fluid, like ballast, fuel and stem tanks. Fatigue damages are sometimes observed in these tanks which seem to be caused by resonance with exciting force of engine and propeller. Vibration characteristics of these thin walled tanks in contact with fluid near engine and propeller are strongly affected by added mass of containing fluid. Therefore it is essentially important to estimate the added mass effect to predict vibration of the tanks. Many authors have studied vibration of rectangular tanks containing fluid. Few research on dynamic interaction among tank walls filled with fluid are reported in the vibration of rectangular tanks recently. In case of rectangular tanks, structural coupling between adjacent panels and effect of vibration modes of multiple panels on added mass of water have to be considered. In the previous report, a numerical analysis is performed for the coupling effect between panels of a tank on added mass of containing fluid, the effect of structural constraint between panels on each vibration mode for fluid region, and mode characteristics in accordance with changing breadth of the plates by using finite element method for plates and boundary element method for fluid region. In this paper, the coupling effect between panels of a tank on added mass of containing fluid, the effect of structural constraint between panels on each vibration mode for fluid region, and mode characteristics in accordance with changing length, thickness, and boundary condition of the plates are investigated numerically and discussed.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.27 no.1
• /
• pp.64-68
• /
• 1991

In this paper, to percuss whether fish oil can substitute for marine fuel oil, the characteristics on the evaporation and ignition of 3 fish oils, Sardine oil, File fish oil and Alaska pollac oil, were investigated experimentally by suspending single fish oil droplel in hot atmosphere, and experiments on methanol and light oil were also carried out to compare the characteristics. The results abtained are summarized as follow; 1) Evaporation and ignition phenomena on the methanol and light oil by the present experimental method agreeded with the results of the earlier investigation. 2) The characteristic on evaporation and ignition of all 3 fish oils took the same pattern; in late stage of evaporation at atmospheric Temperature 55$0^{\circ}C$ droplet rapidly expanded and contracted, and then remained solid corbide, but in case of $650^{\circ}C$ rapidly expanded and ignitied, and then completly burned non-remained solid carbide. 3) As fish oil mixed with light oil (50% weight), in beginning stage of evaporation droplet depended on the characteristics of light oil, but in end stage depended on fish oil. 4) Ignition temperature of fish oil droplets was about 47$0^{\circ}C$, higher than about 25$0^{\circ}C$ of light oil, but atmospheric temperature to ignite droplet was about $650^{\circ}C$, lower than about 75$0^{\circ}C$ of light oil.

• Journal of Korean Society for Atmospheric Environment
• /
• v.34 no.5
• /
• pp.651-658
• /
• 2018

Particulate matter (PM) emitted from fossil fuel-combustion facilities can be classified as either filterable or condensable PM. The U.S. Environmental Protection Agency (EPA) defined condensable PM as material that is in the phase of vapor at the stack temperature of the sampling location which condenses, reacts upon cooling and dilution in the ambient air to form solid or liquid in a few second after the discharge from the stack. Condensable PM passed through the filter media and it is typically ignored. But condensable PM was defined as a component of primary PM. This study investigates the change of condensable PM according to the variation in the sulfur dioxide of combustion gas. Domestic oil boilers were used as the source of emission ($SO_2$) and the level of $SO_2$ concentration (0, 50, 80, and 120 ppm) was adjusted by diluting general light oil and marine gas oil (MGO) that contains sulfur less than 0.5%. Condensable PM was measured as 2.72, 6.10, 8.38, and $13.34mg/m^3$ when $SO_2$ concentration in combustion gas were 0, 50, 80, and 120 ppm respectively. The condensable PM tended to increase as the concentration of $SO_2$ increased. Some of the gaseous air pollutants emitted from the stack should be considered precursors of condensable PM. The gas phase pollutants which converted into condensable PM should reduced for condensable PM control.

• Journal of Navigation and Port Research
• /
• v.43 no.6
• /
• pp.395-402
• /
• 2019

The development and operation of the MASS (Maritime Autonomous Surface Ship) is being actively discussed for more efficient and safer maritime transportation solutions. The autonomous navigation technology has positive aspects such as the prevention of marine accidents, improvement of fuel efficiency of ships and cost reduction, and negative aspects such as job loss, task change, and security problems. It is expected that there will be new human element issues such as the situation awareness of remote operators, because the shore-based control will be conducted when fully autonomous ships are in operation. In this paper, we consider major human element issues that should be factored in the development and operation of MASS, and suggest a method of HRA (Human Reliability Analysis) for P IFs (Performance Influencing Factors) of the remote operators that are expected according to the shore-based control.

• Ocean and Polar Research
• /
• v.31 no.1
• /
• pp.97-110
• /
• 2009

Two of the most important topics of the 21st century are ensuring harmony between man and his environment and the emerging long-tail economy in which niche markets are becoming increasingly more important. Since the Industrial Revolution in 17th century, human beings have increasingly exploited the world's natural capital, such as the natural environment and its ecosystems. Now the world is facing limits to sustainable economic growth because of limits to this natural capital. Thus, most countries are beginning to adopt a new development paradigm, the so-called"Green Development Paradigm" which pursues environmental conservation in parallel with economic growth. Recently, the Korean government announced an ambitious national policy of Low Carbon & Green Growth for the next six decades. This is an important step that transforms the existing national policy into a new future-oriented one. The fisheries sector in particular has great potential for making a substantial contribution to this national policy initiative. For example, the ocean itself with its sea plants and phytoplankton has an enormous capacity for fixing carbon, and its vast areas of tidal flats have a tremendous potential for cleaning up pollutants from both the sea and the land. Furthermore, the fishing industry has great potential for the development of fuel-saving biodegradable technologies, and a long-tail economy based on digital technologies can do much to promote the production and consumption of green goods and services derived from the oceans and the fisheries. In order for this potential to be realized, the fisheries authority needs to develop a new green-growth strategy that is practical and widely supported by fishing communities and the markets, taking into account the need for greenhouse gas reduction, conservation of the ocean environment and ecosystems, an improved system for seafood safety, the establishment of strengthened MCS (monitoring control surveillance) system, and the development of coastal ecotourism. In addition, fisheries green policies need to be implemented through a well-organized system of government aids, regulations and compensation, and spontaneous (voluntary) orders in fishing communities should be promoted to encourage far more responsible fisheries.