• 해양환경안전학회지
• /
• 제21권3호
• /
• pp.290-296
• /
• 2015

This paper presents a novel educational model of subjects of electric, electronic and control for marine engineer in accordance with STCW 2010 amendments. In accordance with STCW 2010, contents of such courses in marine engineering operations of undergraduate programs in maritime university should be updated correspondingly to new features. In order to propose the model, this paper analyses and reviews subjects on electric, electronic and control in STCW convention compared to STCW 1995. Also, in this paper, subjects of electric, electronic and control in marine engineering operations in Korea and other countries are analyzed and a new educational model is proposed. in theoretical perspective and practical perspective.

• 해양환경안전학회지
• /
• 제18권6호
• /
• pp.557-562
• /
• 2012

승선실습교육은 해기사로서의 기본적인 소양과 기능을 연마하기 위하여 이론과 실무를 겸비하도록 하고 다양한 교육 및 훈련과정을 통해 위기상황 대처능력과 자립심을 향상시켜 선박이라는 특수한 작업환경에서 부여된 업무를 효과적으로 달성시키는데 있다. 따라서 본 연구에서는 전문적인 지식 및 리더십을 겸비한 유능한 해기사를 양성하고 승선실습교육의 목적을 달성하기 위하여 실습선 실습기관사 승선실습교육 향상 및 지도를 위한 몇 가지 개선 방안을 제안하고자 한다.

• 수산해양교육연구
• /
• 제27권6호
• /
• pp.1734-1744
• /
• 2015

Majority of marine accidents that occur on fishing vessels are engine accidents. This comprises more than 26 % of the total annual fishing vessel marine accident cases. Large numbers of engine accidents happen in the cooling water system, which are mostly caused by negligence on regular check-up and repair. Notably, small-sized ships have higher engine accidents occurrence rate compared to medium-and large-sized ships. Based on the Report of the Korea Ship Safety Technology Authority, engine accident cases reached 3,032 out of the total 3,081 cases. This study researches on the differences between the small-sized ship pilot, an operator of a vessel engine of less than 200 tons, and a 6th level marine engineer, in terms of the relationship between management forms and what causes the marine accidents in association with the cooling water system. It also studies and analyzes the differences in frequency of the accident occurrence between the two groups. ${\chi}^2$ qualification was imposed through the SPSS statistical analysis program and it got qualified at the significance level of 5%. The research shall be utilized as one of the base line data for the reduction of marine accidents.

• 기술사
• /
• 제38권2호
• /
• pp.44-47
• /
• 2005

Recently, there are severe tension between Korea and Japan around Dokdo area. Because the marine resources near Dokdo are much plentiful. Especially, development of deep sea water and natural gas are hopeful in this area. In order to preoccupy a development plan of marine resources, many scientific investiment for ocean research are needed. We must have continuous concern about marine resources near Dokdo area.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(2)
• /
• pp.945-946
• /
• 2005

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권4호
• /
• pp.476-485
• /
• 2014

PBL은 문제를 활용하여 학습자 중심으로 학습을 진행하는 학습방식이다. 선박기관사는 선박이라는 고립된 환경에서 발생할 수 있는 모든 문제상황을 해결하여 선박의 안전운항을 지원하는 전문인이다. 본 연구에서는 이러한 선박기관사 해기실습교육에 PBL을 활용한 선박기관사 해기실습교육에 대한 기초연구를 시행하였다. 실제 H대학교 해기실습교육을 이수하고 있는 학생 56명을 대상으로 6개월간 총5회의 PBL을 시행한 후 설문조사를 시행하였다. 설문조사 결과 문제해결능력, 대인관계능력, 의사소통능력, 종합적 사고력, 자원정보활용능력 측면에서 PBL 방식이 효과가 있다고 하였으며, PBL에 대한 정보가 부족하고 주입식 교육방식에 익숙한 학생들은 일부 거부감을 표하기도 하였다. 본 연구에서는 PBL을 활용한 해기실습교육에 대한 기초연구를 기반으로 향후 개선되어야 할 사항과 발전방안을 제시하고자 한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권2호
• /
• pp.304-312
• /
• 2009

Automated design system of injection mold was developed in this study. Shapes of mold parts and mold base were defined according to standards of mold components and database modules of mold components were built. And then an automation program of mold design was developed by the user definition features, family table and Pro/Program of Pro/Engineer. The automatic production divided into mold base and standard parts was manipulated to manufacture parts meeting the design requirements and the selected parts were changed in size and shape to meet the design goals. The mold design was also carried out to have organic relations and be easy in case of a change to the mold part or mold base. As a result, it is possible to design the mold efficiently and conveniently modify the designed mold parts and base by using the developed automated design system in this study.

• 기술사
• /
• 제34권6호
• /
• pp.60-65
• /
• 2001

• 기술사
• /
• 제26권4호
• /
• pp.40-45
• /
• 1993

• 기술사
• /
• 제27권4호
• /
• pp.95-97
• /
• 1994