• 노동경제논집
• /
• 제28권1호
• /
• pp.135-156
• /
• 2005

본 연구에서는 자영업 부문의 소득분포 및 소득결정요인을 임금근로와 비교 분석하였다. 자영업 부문은 임금근로보다 소득편차가 크고, 부문내 이질성이 큰 집단이라는 점에서, OLS 추정과 더불어 분위회귀분석(quantile regression analysis)을 실시하였다. 주요 분석 결과를 보면, 첫째, 자영업주의 소득이 임금근로자보다 높으며, 소득분위가 높아질수록 자영업주와 임금근로자간의 소득격차가 확대된다. 둘째, 교육의 한계효과는 자영업주와 임금근로자 공히 소득분위가 높아질수록 증가하고 있어, 소득분위가 높은 집단일수록 교육에 대한 보상(가격)이 높다는 것을 알 수 있다. 단, 여성 자영업주의 경우는 예외로서, 소득분위가 높을수록 교육의 한계효과가 감소한다. 즉 소득분위가 높은 집단에 속하는 임금근로자와 남성 자영업주는 소득분위가 낮은 집단에 비해 노동시장에서 교육에 대한 보상이 더 큰 반면, 여성 자영업주는 소득분위가 높은 집단에서 교육에 대한 보상이 오히려 작다.

• Restorative Dentistry and Endodontics
• /
• 제19권2호
• /
• pp.473-484
• /
• 1994

To investigate the effect of resin cement, which had been known to increase the adhesive capacity of the cast gold inlay, on the gingival marginal fit and whether the tin-planting of the beveled area affects the marginal fit, Class II cast gold inlays were made on the 25 sound molars. Control group(ZPC goup) was cemented with the ZPC by conventional method. Experimental groups were cemented with the resin cement(Super-hond & $Panavia_{EX}$) and subdivided further by the existence or nonexistence of the tin-plating of the beveled area(ST & PT groups: with plating, SNT & PNT groups: without plating). So, each group was consisted of 5 teeth and the gingival margin of each specimen was mesiodistally sectioned by 3 times and the marginal and internal gap were evaluated by the Stereo Microscope (${\times}180$) and the Scanning Electron Micrascope(${\times}5,000$) was used for examining the adhesive relationship of the resin cement to the cavity wall and to the cast gold surface. The results were as follows : 1. Marginal gap was less than internal gap in all groups. 2. ZPC and SNT(bevel without tin-plating) groups showed the least gap and gap in PNT(bevel without tin-plating) group, ST(bevel with tin-plating) group, PT(bevel with tin-plating) group showed the greater value in order in evaluation of the both internal gap and marginal gap. 3. With the exception of the relationships between ZPC and SNT groups, ST and PNT groups, relationships between any other groups showed the statistical significance in the internal gap(p<0.05). 4. In the marginal gap, all relationships between groups showed the statistical significance (p<0.05) except the relationships between ZPC and SNT groups, ST and PNT groups, ZPC and PNT groups. 5. ZPC group showed more soluble phenamena than the resin groups(ST, SNT, PT, PNT). 6. Resin cement showed the void spaces in spite of good penetration into the micro-irregularities on both the tooth surface and the cast surface. The void was shown more in PT and PNT groups than in the ST and SNT groups. 7. After the treatment of heat and desiccation for SEM specimen, resin cements were detached more easily from the tooth surface than from the cast surface.

• Restorative Dentistry and Endodontics
• /
• 제27권1호
• /
• pp.34-43
• /
• 2002

The purpose of this study was to compare microleakage and marginal hybrid layer in class V restorations using two one-bottle adhesives and one self-etching adhesive. Class V cavity preparations with occlusal margins in enamel and gingival margins in dentin were pre-pared on buccal and lingual surfaces of 30 extracted human molar teeth. Prepared teeth were randomly divided into three treatment groups (n=30) and restored with three adhesives and composites: Single Bond/Filtek Z-250 (Group 1), Prime&BondNT/Esthet.X (Group 2), UniFil Bond/UniFil F (Group 3). For microleakage, samples were stored in room temperature water for 24 hours, thermocycled stained with 2% methylene blue dye, sectioned into halves, scored and analysed using Mann-whitney test and Wilcoxon signed rank sum test. For marginal hybrid layer, samples were sectioned into halves, treated with 10% phosphoric acid for 5 seconds, stored in 5% NaOCL solution for 24 hours, dried and gold coated. Occlusal and gingival margins of each sample were inspected under SEM. The results of this study were as follows ; 1. Microleakage at the occlusal margins was not evident in group 1 and group 2, but it showed in group 3 (p<0.05). 2. Microleakage in group 1 and group 3 was significantly lower than in group 2 at gingival margins (p<0.05). 3. Microleakage at gingival margins was greater than at occlusal margins in group 1 and group 2, but microleakage at occlusal margins was greater than at gingival margins in group 3 (p<0.05). 4. In group 1 and group 2, no gaps at occlusal margins showed. But gaps showed in group 3. Occlusal margins were free from a hybrid layer in all groups 5. The thickness of the marginal hybrid layers was 2.5~5 $\mu\textrm{m}$ thick in group 5 $\mu\textrm{m}$ thick in group 2 and 1.5 $\mu\textrm{m}$ thick in group 3. 6 There was no corelation between microleakage and thickness of marginal hybrid layer. In coclusion, the effect of dentin adhesives on microleakge in class V composite restorations was excellent when one-bottle adhesives were applied on enamel margin, and it was good when a self-etching adhesive was applied on dentinal margin. There was no corelation between microleakage and thickness of marginal hybrid layer.

• 구강회복응용과학지
• /
• 제25권4호
• /
• pp.417-429
• /
• 2009

골유착성 임플란트가 소개된 이후로 부분 및 무치악 부위에서 사용되어 높은 성공률과 함께 예지성 있는 결과를 보여주는 치료방법으로 인정받고 있다. 그러나 국내에서 개발된 임플란트에 대해서는 임상적이고 객관적인 연구 자료가 불충분하다. 본 연구에서는 31명의 환자에게서 임플란트 경부에 미세나사를 지닌 임플란트 식립 후 평균 21개월의 기간 동안 임플란트의 생존율에 관한 조사를 시행하였고 부하가 가해지는 시점을 기준으로 12개월 간 변연골의 변화를 파노라마사진을 이용하여 측정 관찰하여 다음의 결과를 도출하였다. 총 96개의 임플란트에서 3개의 임플란트가 실패하여 96.9%의 생존율을 보였다. 50대 환자에서 85.7%로 가장 작은 생존율을 보였으며 성별 및 연령에 따른 생존율 및 변연골 흡수량에 대한 통계적 유의성은 존재하지 않았다. 상악에서는 95.7% 하악에서는 100%의 생존율을 보였다. 골이식 여부, 보철물의 종류, 매식체의 길이 및 직경에 따른 생존율의 차이는 통계적으로 유의한 차이를 보이지 않았다. 기능 부하 후 임플란트 변연골 흡수량은 단일 금관 보철물이 연결 고정 보철물에 비해 증가된 양상을 보였으나 임플란트의 직경, 길이, 골이식의 유무, 식립위치에 의해서는 통계적으로 유의한 차이를 보이지 않았다. 이 연구를 통해 경부에 미세나사를 지닌 임플란트 식립 후에 임플란트 변연골 흡수량은 비교적 적게 일어났으며 또한 안정적으로 유지되는 것이 관찰될 수 있었고 이에 따른 장기적인 추적관찰이 필요할 것으로 사료된다.

• 대한심미치과학회지
• /
• 제31권1호
• /
• pp.4-10
• /
• 2022

하악 전치부에 임플란트를 이용한 수복시 몇가지 어려운 점이 있는데 그중 하나가 전 후방으로 공간이 부족하다는 것이다. 공간이 부족한 경우에 임플란트를 적절한 위치에 식립하는 것도 쉽지 않을뿐아니라 선택할 수 있는 임플란트도 제한될 수있다는 것이다. 적절한 위치에 적절한 임플란트를 식립한 경우에도 보철의 형태에따라 주변치아와 임플란트 주변골에 상당히 큰 영향을 미칠수 있는데 어떤 경우는 임플란트가 주변골을 손상시키는 위해로운 영향을 줄수도 있다. 이번 증례 발표에서는 비교적 양호한 증례와 불량한 증례를 통해서 치은하 형태(Subgingival cotour)의 차이가 임플란트 주위 Marginal bone과 인접치아의 Interproximal bone의 Biology에 다른 결과를 줄수도 있다는 것을 확인할 수있다.

• 대한소아치과학회지
• /
• 제23권3호
• /
• pp.746-763
• /
• 1996

An alternative design to conventional class II cavity preparation for proximal carious lesions is the tunnel preparation. It preserves the marginal ridge intact, thus making it possible to maintain the natural contact relationship with the adjacent tooth and minimize tooth reduction. This in vitro study was purposed to evaluate the effect of the materials' elastic constants and shear-bond strength on the marginal ridge fracture resistance of teeth restored by the tunnel technique, and to find the materials of choice for tunnel restorations. $Resinomer^{(R)}$, $Ketac-silver^{(R)}$, $Miracle-Mix^{(R)}$, and Tytin were used as restorative material. The elastic constants of each restorative material were evaluated by ultrasonic pulse measurement. Young's modulus and bulk modulus of the restorative materials were evaluated in three specimens for each material type. The shear-bond strength of the restorative materials to the dentin surface was measured after thermocycling 400 times between 6 and $60^{\circ}C$, using ten specimens for each material type. For measuring marginal ridge strength, 60 sound extracted molar teeth were distributed into six groups by size. Sound molar teeth were used as a Control group and unfilled prepared teeth were grouped as Unrestored. Another four groups were named Resinomer group, Ketac-Silver group, Miracle Mix group, and Tytin group by type of restorative material. Tunnel cavity preparation was done with ' 1/2, 2, and 4 round burs in sequence. Initial access to proximal surface was made through an occlusal access preparation started at least 2mm from the marginal ridge, and the proximal opening was formed about 2.5mm below the marginal ridge. After restoration and thermocycling, marginal ridge strength was measured using a universal testing machine. The results were as follows: 1. The Young's modulus of $Tytin^{(R)}$ was 63.95 GPa, followed by $Ketac-Silver^{(R)}$ 27.60 GPa, $Miracle-mix^{(R)}$ 18.48 GPa, and $Resinomer^{(R)}$ 10.74 GPa showing significant differences between the groups(P<0.05). The bulk modulus of the materials showed the same order as Young's modulus. The value of $Tytin^{(R)}$ showed 59.57 GPa indicating that it will deform less than other materials under the same stress. It was followed by $Ketac-Silver^{(R)}$ 23.57 GPa, Miracle $Mix^{(R)}$ 12.50 GPa, and $Resinomer^{(R)}$ 11.60 GPa. 2. The Resinomer group had a shear-bond strength of 7.41 MPa which was significantly higher than those of the Ketac-Silver group (1.80 MPa) and the Miracle Mix group (2.84 MPa) (P<0.01). All the specimens of Tytin group detatched from the dentin surface during thermocycling. 3. The mean marginal ridge strength of the Unrestored group(46.14 kgf) was significantly lower than that of the Control group (84.24 kgf) (P<0.01). The marginal ridge strength of teeth restored by the tunnel technique was, in order, Ketac-Silver group 74.06 kgf, Miracle Mix group 73.36 kgf, Resinomer group 63.47 kgf, and Tytin group 58.76 kgf. The Ketac-Silver, Miracle Mix, and Resinomer groups showed no significant difference with the Control group (P>0.05), but the Tytin group showed significantly lower strength compared to the Control group(P<0.05). The results showed that the marginal ridge strength of the teeth restored by the tunnel technique was not significantly lower than that of sound teeth. They also demonstrated that the bonding strength of the restorative material to the tooth surface should be high and the modulus of elasticity should not be lower than that of the tooth in order to restore the marginal ridge strength to its natural condition.

• 대한교통학회지
• /
• 제32권1호
• /
• pp.73-81
• /
• 2014

이 연구는 고속도로에서 발생한 교통사고에 대한 기하구조의 영향을 알아보고자 시도되었다. 기하구조의 경우에는 지침 등에서 정하는 기준 권장값등이 있지만, 기존의 사고모형에서는 교통사고에 영향을 미치는 기하구조의 자료가 통합된 형태로 사용되어 혼합된 형태로 설치된 현실을 추정된 모형이 제대로 설명하지 못하는 단점이 있다. 따라서 이 연구에서는 기하구조를 기준값에 의해 세분화된 기하구조 자료를 사용함으로써, 현실을 반영한 모형을 추출하고자 하였다. 그리고 각 기하구조별 탄력성 분석을 통해 사고에 미치는 영향을 제시하였다. 이는 향후 교통안전을 고려한 기하구조의 지침 정립에 도움이 될 것으로 사료된다.

• 상하수도학회지
• /
• 제10권3호
• /
• pp.100-114
• /
• 1996

Besides insufficient water, water contamination confronts us with 'water crises' of both quantity and quality. However, the daily water consumption per capita of Korea is greater than that of other developed countries. Because of the current low water price, which is lower than a half of production cost, not only does it become difficult to cope promptly with rapidly increasing water demand and water contamination, but it also causes waste of water. We should, therefore, switch over from supply side management-oriented policy to demand side management-oriented policy through a raise of the water rate. This study carries out a cost analysis based on fair return method which is the principle of water pricing in Korea, and it estimates, through equilibrium analysis, long run marginal cost(LRMC), which satisfies allocative efficiency and reflects true social cost to additional one-unit water supply. Based on the results, this study proposes that the estimated LRMC is the optimal price level in water pricing, which is the most important of the demand side management policies. In the end, water conservation effect, price pervasive effect, and social welfare effect are analyzed.

• 대한치과기공학회지
• /
• 제30권2호
• /
• pp.57-63
• /
• 2008

Statement of problem: Conventional techniques for implant framework fabrication produce significant error that is inconsistent with passive-fit requirement for osseointegrated implants. One of the etiologic factors which cause the errors is a sprue which may deform the framework during solidification and contraction. Purpose: This study was aimed to evaluate objectively effect of the sprue design on the accuracy of fit of implant prosthesis. Materials and method: Three different designs were considered relative to effect of casting accuracy. The first design had straight sprues and a button of excess alloy at the non-casting end of the sprues. The second was runner bar design(with the button). The last was straight sprues design(without the button). Gold cylinder and laboratory analogue had been used to diminish variables affecting to casting accuracy. Gold alloy and pressure-vacuum casting machine had been used. Marginal gap had been measured by SEM. One-way ANOVA and Duncan test had been used for statistical analysis. Results: The first design showed $79.87{\pm}13.95{\mu}m$ marginal gap. The second and third were $40.17{\pm}15.8{\mu}m$ and $35.17{\pm}9.95{\mu}m$ respectively. Conclusion: Straight sprues without button and runner bar designs were more accurate than straight sprues with button design(P<.05).

• 동아시아경상학회지
• /
• 제6권4호
• /
• pp.25-34
• /
• 2018

Purpose - The purpose of this study is to investigate the effect of Korean Wave on consumer intentions by adjusting the Korean image and image of Korean company to counterbalance the hostility through the control effect of Korean Wave. Research design and methodology - This paper measure individual and national hostility and suggest that the effect of the adjustment of Korean culture satisfaction on corporate image, product image and consumer's purchase intention. Results - This study suggests the subjects to be studied empirically by presenting research themes and models, but it is necessary to verify the model through statistical verification since it is not verified empirically. In addition, it is necessary to further control factors and identification of anti-marginal or anti-marginal products. Conclusions - This study suggests research topics that investigate how hostility affects Korean Wave in consideration of the current special situation, while conventional researches mainly focus on ethnocentrism and patriotism. In this way, this study suggests research direction that helps to enhance corporate image and product image by eliminating hostility and actively utilizing Korean Wave. The Proposal will be helpful to provide a frame for empirical analysis in future and to develop strategic means to further utilize it in international marketing.