• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.943-948
• /
• 2000

The Twin-fluid Swirl Nozzles are used in many parts of the industry to produce homogeneous spray. This study is to investigate the effects of outer air swiller and inner water swiller on atomization of liquid.. The experiment was carried out with increasing air-flow rate at constant liquid-flow rate and with changing outer air swiller angle and inner water swiller angle. A Particle Dynamics Analyzer(PDA) was used to measure drop size, mean and ms values of axial velocity, number density and Sauter mean diameter(SMD). The axial mean velocity and SMD of droplets were measured along the center line and radial directions. It was found that the higher air flow-rate resulted in the smaller Sauter mean diameter of liquid spray and the higher axial mean velocity of droplets. This experimental results will be conveniently used for the preliminary design stage of twin-fluid nozzle development.

• 한국응용과학기술학회지
• /
• 제17권4호
• /
• pp.257-261
• /
• 2000

Monodisperse polymer particles have many industrial applications such as surface coatings for metal panels, chromatographic media, spacers for liquid crystal display panel, and fillers for cosmetics, etc.. Micron-size monodispersed poly(methyl methacrylate) particles were prepared by dispersion polymerization in methanol medium in the presence of poly(vinyl pyrrolidone) and 2,2'-azobis(isobutyronitrile) as steric stabilizer and initiator, respectively. Effects of polymerization parameters, such as monomer and initiator concentration, stabilizer type and concentration, solvent composition on average particle size and size distribution were studied.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1990년도 추계학술대회 논문집
• /
• pp.91-94
• /
• 1990

The behavior of charged particle in dielectrics have a many effects on characteristics of the insulating materials. In this paper, numerical analysis method by hopping model was investigated application of TSC. As the results, there was a difference between characteristics of TSC by dipole polarization. Physical constant of movable ion corresponding to the experimental results was evaluated and also. Numerical calculations of unsaturated TSC and I-V characteristics were carried out by was of hopping model.

• 전기학회논문지
• /
• 제56권6호
• /
• pp.1023-1030
• /
• 2007

This paper presents a new and efficient approach for solving the economic dispatch (ED) problems with nonconvex cost functions using particle swarm optimization (PSO). Although the PSO is easy to implement and has been empirically shown to perform well on many optimization problems, it may easily get trapped in a local optimum when solving problems with multiple local optima and heavily constrained. This paper proposes an improved PSO, which combines the conventional PSO with chaotic sequences (CPSO). The chaotic sequences combined with the linearly decreasing inertia weights in PSO are devised to improve the global searching capability and escaping from local minimum. To verify the feasibility of the proposed method, numerical studies have been performed for two different nonconvex ED test systems and its results are compared with those of previous works. The proposed CPSO algorithm outperforms other state-of-the-art algorithms in solving ED problems, which consider valve-point and multi-fuels with valve-point effects.

• 한국세라믹학회지
• /
• 제49권4호
• /
• pp.337-341
• /
• 2012

Mechanochemical processing (MCP) involves several high-energy collisions of powder particles with the milling media and results in the increased reactivity/sinterability of powder. The present paper shows results of mechanochemical processing (MCP) of silicon nitride powder mixture with the relevant sintering additives. The effects of MCP were studied by structural changes of powder particles themselves as well as by the resulting sintering/densification ability. It has been found that MCP significantly enhances reactivity and sinterability of the resultant material: silicon nitride ceramics could be pressureless sintered at $1500^{\circ}C$. Nevertheless, a degree of a silicon nitride crystal lattice and powder particle destruction (amorphization) as detected by XRD studies, is limited by the specific threshold. If that value is crossed then particle's surface damage effects are prevailing thus severe evaporation overdominates mass transport at elevated temperature. It is discussed that the cross-solid interaction between particles of various chemical composition, triggered by many different factors during mechanochemical processing, including a short-range diffusion in silicon nitride particles after collisions with other types of particles plays more important role in enhanced reactivity of tested compositions than amorphization of the crystal lattice itself. Controlled deagglomeration of $Si_3N_4$ particles during the course of high-energy milling was also considered.

• 해양환경안전학회지
• /
• 제9권1호
• /
• pp.89-94
• /
• 2003

최근 선박 연료유는 고점도화 되고 슬러지분이 증가되고 있는 추세이며, 선박에서 발생한 슬러지의 처리 및 보일러 연료유로의 재활용 방안 등에 대해서 많은 연구가 수행되고 있다. 이러한 연구 중 특히 슬러지를 미립화하여 분쇄하기 위한 초음파 유화기는 가장 현실성 있는 재활용 장치로 알려져 있다. 이러한 관점에서, 이 연구는 초음파 유화기 개발에 대한 기초연구로서 슬러지의 유온과 유압이 따른 여과효율을 조사하였다. 실험결과는 보일러 인젝터에 슬러지를 분사할 경우 적절한 온도와 압력을 결정하거나, 또한 초음파 유화기에 의한 실험결과와 비교할 수 있는 자료로 활용될 수 있다. 아울러 유온과 유압의 영향에 따라 분쇄된 슬러지 입자의 여과효율 등을 연구하는데 있어서 기초자료로 활용될 수 있을 것이며, 궁극적으로 선박에서 발생한 슬러지를 자체 처리하여 보일러의 연료유로 사용함으로써 해양유류오염을 방지하는데 기여할 수 있을 것이다.

• 한국미생물·생명공학회지
• /
• 제26권2호
• /
• pp.117-121
• /
• 1998

김치로부터 분리한 Lactobacillus plantarum bacteriophage SC 921은 M.O.I가 0.2일 경우 용균효과가 빠르게 진행됨을 알 수 있었고, SDS-PAGE를 실시하여 phage particle protein을 조사해 본 결과 4개의 major protein으로 구성되어 있는데 이들은 각각 48, 34, 32, 29 kDa으로 구성되어 있다. Exo III로 30분간 반응시킨 후 S1 nuclease를 처리하여 DNA의 형태를 조사해 본 결과 intact DNA는 linear form의 double strand를 유전전달 물질로 가지고 있었다. 제한효소에 대한 절단 효과를 조사한 결과, Sma I에 대해서 1개, Xba I, Cla I, Kpn I, EcoRI에 대해서 각각 2, 4, 5, 6개의 절단부위를 가지고 있으며, Hind III에 대해서는 절단부위가 매우 많은 것을 알 수 있었다. Hind III를 이용하여 intact DNA의 genome size를 측정해본 결과 약 66.5 kbp정도였다. 위의 실험결과와 restriction enzyme mapping을 통해 기존에 알려진 bacteriophage B2와 비교해본 결과 숙주 균주는 같으나 단백질적인 구조나 유전전달물질로 본 구조는 서로 다름을 알 수 있었다.

• 한국세라믹학회지
• /
• 제28권2호
• /
• pp.119-129
• /
• 1991

$\gamma$-FeOOH suitable for magnetic recording media was synthesized using waste acid which is the by-product of the iron works factory. Effects of concentration of the acid and alkali and reaction temperature on the particle properties of $\gamma$-FeOOH and magnetic properties of $\gamma$-$Fe_2O_3$ were studied. $\gamma$-FeOOH single phase was formed below 1M of acid concentration with 1M of alkali concentration and at 0.4M of acid concentration with 4M of alkali concentration. While the width of acicular particle was increased, the length of acicular particle was decreased with diluting acid concentration. The magnetic properties of the $\gamma$-$Fe_2O_3$ improved with increasing acid concentration. $\gamma$-FeOOH single phase was formed in the temperature range of 30 to $80^{\circ}C$. The length of the particle was decreased with increasing temperature. $\gamma$-Fe2O3 produced from dehydration of $\gamma$-FeOOH showed bad magnetic properties due to the presence of many pores in the particle. But with successive reduction and oxidation of $\gamma$-$Fe_2O_3$ produced from dehydration of $\gamma$-FeOOH, $\gamma$-$Fe_2O_3$ showed good magnetic properties.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 추계학술대회논문집
• /
• pp.116-119
• /
• 2000

The advantage of plasma-sprayed coating is their good resistance against thermal shock due to the porous state of the coated layer with a consequently low Youngs modulus. However, the existence of many pores with a bimodal distribution and a laminar structure in the coating reduces coating strength and oxidation protection of the base metals. In order to counteract these problems, there have been many efforts to obtain dense coatings by spraying under low pressure or vacuum and by controlling particle size and morphology of the spraying materials. The aim of the present study is to survey the effects of the HIP treatment between 1100 and 130$0^{\circ}C$ on plasma-sprayed oxide coating of A1$_2$O$_3$, A1$_2$O$_3$-SiO$_2$on the metal substrate (type C18N10T stainless steel). These effects were characterized by phase identification, Vickers hardness measurement, and tensile test before and after HIPing. These results show that high-pressure treatment has an advantage for improving adhesive strength and Vickers hardness of plasma-sprayed coatings.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.116-119
• /
• 2000

The advantage of plasma-sprayed coating is their good resistance against thermal shock due to the porous state of the coated layer with a consequently low Youngs modules. However, the existence of many pores with a bimodal distribution and a laminar structure in the coating reduces coating strength and oxidation protection of the base metals. In order to counteract these problems, there have been many efforts to obtain dense coatings by spraying under low pressure or vacuum and by controlling particle size and morphology of the spraying materials. The aim of the present study is to survey the effects of the HIP treatment between 1100 and 130$0^{\circ}C$ on plasma-sprayed oxide coating of A1$_2$O$_3$, A1$_2$O$_3$-SiO$_2$ on the metal substrate (type C18N10T stainless steel). These effects were characterized by phase identification, Vickers hardness measurement, and tensile test before and after HIPing, These results show that high-pressure treatment has an advantage for improving adhesive strength and Vickers hardness of plasma- sprayed coatings.