• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.2
• /
• pp.67-76
• /
• 2017

In industrial site in various fields it will be generated in combination with large amounts of data have a correlation. It is able to collect a variety of data in types of industry process, but they are unable to integrate each other's association between each process. For the data of the existing industry, the set values of the molding condition table are input by the operator as an arbitrary value When a problem occurs in the work process. In this paper, design the fusion and analysis processing model of data collected for each industrial type, Prediction Case(Automobile Connect), a through for corporate earnings improvement and process manufacturing industries such as master data through standard molding condition table and the production history file comparison collected during the manufacturing process and reduced failure rate with a new molding condition table digitized by arbitrary value for worker, a new pattern analysis and reinterpreted for various malfunction factors and exceptions, increased productivity, process improvement, the cost savings. It can be designed in a variety of data analysis and model validation. In addition, to secure manufacturing process of objectivity, consistency and optimization by standard set values analyzed and verified and may be optimized to support the industry type, fits optimization(standard setting) techniques through various pattern types.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.543-554
• /
• 2016

This study examined the fatigue and its association with job stress among male workers engaged in small-scale manufacturing industries. The study subjects were 553 male workers under 50 members of manufacturing industries. The study survey was a structured questionnaire of the Korean Occupational Stress Scale (KOSS) and Multidimensional Fatigue Scale (MFS) during April, 2015. The data were analyzed using the SPSS ver 21.0 program. The results showed that the high risk fatigue group was significantly higher in the high risk group of job stress than in the normal group of job stress. Fatigue was positively correlated with job stress. The odds ratio of the high risk fatigue group were increased significantly in the high risk group of job stress than in the normal group of job stress. The factors of influence with explanatory powers of 27.7% on fatigue included age, marital status, educational level, subject health status, sleeping time, drinking coffee, job tenure, shift work, visiting out-patient department, sense of satisfaction in job life, and job stress. Fatigue was associated with the sociodemographic characteristics, health behavior related characteristics, job-related characteristics, and job stress.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6627-6640
• /
• 2015

This study was performed to determine the complaint rates of musculoskeletal symptoms and its association with related factors among manufacturing workers. The self-administered questionnaires were given to 856 male with 50 or less employees in manufacturing industries. As a results, complaint rates of work-related musculoskeletal symptoms of the body sites was 61.2% for shoulders, 55.4% for low back, 55.3% for neck, 38.6%, for legs/feet, 32.2% for hands/wrists/fingers and 26.9% for arms/elbows. In logistic regression analysis of significant factors related with musculoskeletal symptoms of body sites, neck was related with marital status, subjective health status, smoking, drinking coffee and occupational stress, shoulders was related with job tenure, shift work, visiting out-patient department and occupational stress, arms/elbows was related with sleeping time, experience of sick absence and occupational stress, hands/wrists/fingers was related with age, smoking, drinking coffee, working hour, job position, job tenure, visiting out-patient department and occupational stress, low back was related with educational level, BMI, sleeping time, job position, job tenure, visiting out-patient department and occupational stress and legs/feet was related with marital status, job position, job tenure, history of hospitalization and occupational stress.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3552-3560
• /
• 2012

This study was conducted to find out the complaint rate of musculo-skeletal disorder and its related factors from male manufacturing workers at a nonferrous manufacturing industry. As for the research subjects, 302 workers selected from a nonferrous manufacturer located in Daejeon City, and as for the collection of data, a standardized anonymous questionnaire survey were conducted from May 1, 2011 to June 30, 2011. As a results, the complaint rate of musculo-skeletal disorders by each body part, the symptom of shoulders was 42.7%, the highest rate, followed by the waist, 36.8%, the neck and the hand/wrist/finger, 30.5% respectively, the leg and foot, 30.1% and arm/elbow, 20.9%. The complaint rate of musculo-skeletal disorder for the sociodemographic characteristics was significantly high as survey participants' age and BMI were low and in the group having low subjective health condition. The complaint rate of musculo-skeletal disorder for the health-related behavior characteristics was significantly high in the group having been absent from work due for diseases, in the group having received outpatient services, in the group having been hospitalized for treatment, in the group not having a regular exercise and in the group having insufficient sleeping hours. Finally, the complaint rate of musculo-skeletal disorder for the job-related characteristics was significantly high in the group suffering from the physical burden of their work, in the group working while bending at the waist and in the group carrying out repetitive tasks.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.285-292
• /
• 2017

The purpose of this study was to investigate the relationship between the fasting blood sugar and serum lipid levels (TC, TG, HDL-C, LDL-C) and obesity indices (BMI, body fat rates, waist circumference, waist to hip ratio). The study sample consists of 1,473 manufacturing workers aged from 30 to 59 years, who underwent a health check-up at a university hospital during the period from Jan. to Dec. 2015. A data analysis was conducted to classify the subjects into the normal and abnormal groups according to their fasting blood sugar levels depending on the average values of the serum lipids and obesity indices. Multiple regression analyzes adjusted for sex and age were conducted for the factors affecting the fasting blood sugar level. As a result, the Serum TC, TG, LDL-C, BMI and waist circumference were found to be significantly higher in the abnormal fasting blood sugar level group than in the normal one, but the HDL-C was significantly lower in the abnormal group than in the normal one The fasting blood sugar level had a significant positive correlation with the TC, TG, LDL-C, BMI and waist circumference. The TC, TG, BMI and body fat were the significant factors affecting the fasting blood sugar. The above results suggest that the fasting blood sugar and serum lipid levels (TC, TG, HDL-C, LDL-C), obesity indices (BMI, body fat rates, waist circumference, waist to hip ratio) of manufacturing workers are significantly associated with each other.

• Journal of Food Hygiene and Safety
• /
• v.30 no.2
• /
• pp.159-165
• /
• 2015

The aim of this study was to investigate microbiological contamination levels in the manufacturing company of ginseng products (white and red ginseng). Firstly, the contamination level for ginseng and each stage ginseng were 1.8~4.9 log CFU/g (total bacteria), 1.2~3.0 log CFU/g (coliform), 0.8~4.1 log CFU/g (fungi). However, only Bacillus cereus among pathogenic bacteria was detected from a few sample. The contamination of total bacteria tended to decrease as ginseng was being processing. Therefore, that of finished products (white and red ginseng) showed the lowest contamination level among each stage ginseng sample. That of fungi decreased steadily, although the contamination of fungi has tended to increase right after ginseng was steamed. Secondly, the contamination level for working tools and facilities were $1.7{\sim}4.7log\;CFU/cm^2$ (total bacteria), $0.4{\sim}4.0log\;CFU/cm^2$ (coliform), $0.9{\sim}4.2log\;CFU/cm^2$ (fungi). Especially, washing and peeling machines were higher contamination level. Finally, the contamination level of worker who washed and steamed ginseng was higher than worker who shaped, sorted and stored ginseng. Also, Staphylococus aureus was detected at 0.2~0.7 log CFU/hand on some wokers' hands. These results showed proper heating condition (temperature and time) and tidy manufacturing facility are the most important to avoid developing any microbiological problem of Ginseng Products.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.2
• /
• pp.199-205
• /
• 2013

Objective: The aim of this study is to investigate the job rotation implementation at medium- or small-industries and to identify the viewpoint on job rotation as preventive activity of work-related musculoskeletal disorders(WMSDs). Background: Job rotation has been implemented in many industrial areas in order to prevent the WMSDs as one part of ergonomic program. Generally, the cases of implementation of ergonomic program or successful cases of job rotation were reported on the side of major or large company. Therefore, this study tried to inspect the current state of job rotation implementation at medium- or small-industries. Method: Survey was carried out for randomly contacted forty seven mangers responsible for safety. Survey contained the questionnaires on the general state of company, shift-work and job rotation. Results: The ratio of work-shift in medium- and small-industry was 34.0% and the ratio of job rotation was 19.1%. For manufacturing industry, the ratio was 37.9% and 17.2%, respectively. Conclusion: The implementation ratio of job rotation was relatively low considering the results of previous studies. Many managers appealed the quality decreasing of goods and the injuries of workers due to job rotation, though agreed to train the multi-functional worker and to prevent the WMSDs. Application: The results can be used for the fundamental data how the job rotation will be properly implemented in medium- and small-industry as an administrative control for MSDs.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.4
• /
• pp.43-55
• /
• 2009

In terms of deregulation requests from business, incidents at construction sites are rapidly increasing after reducing the regular safety training hours. Especially, to prevent incidents through safety trainings for construction site workers, who have lots of hazardous tasks than general manufacturing, is not only to protect property of both the companies and the country but also to increase their profits. That is why there are loud voices regarding that the safety training is a core mandatory to prevent industrial incidents. But, most companies, as soon as the deregulation for safety training is implemented, mitigated conducting safety trainings to prevent incidents. With this, the incidents are currently to be increased and caught in a vicious circle of many incidents at the smaller companies because of their absentmindedness regarding safety training due to their poorness as subcontractors of major companies, comparing to major companies. This study explains that the difference between managers and workers are existing about safety awareness and knowledge. And, we confirmed that the educational factor led by deficiency of safety awareness and knowledge was the major factor.

• The Journal of the Korea Contents Association
• /
• v.17 no.6
• /
• pp.132-141
• /
• 2017

The factors influencing nicotine dependence of smoking shift workers (154 samples), working in manufacturing industry, were investigated. 23.4% of the sample showed moderate nicotine dependence while 14.3% did severe dependence. Nicotine dependence showed statistically significant difference with respect to sex, disease, and health condition and was positively correlated with occupational stress. Occupational stress, sex, and disease were identified as the influential factors, explaining 43.9%, and should be the basis for intervention to reduce nicotine dependence.

• Journal of Environmental Health Sciences
• /
• v.37 no.1
• /
• pp.12-21
• /
• 2011

The objective of this study is to review retrospective exposure assessment methods used in wafer fabrication operations to determine whether adverse health effects including mortality or cancer incidence are related to employment in particular work activities and to recommend an appropriate approach for retrospective exposure assessment methods for epidemiological study. The goal of retrospective exposure assessment for such studies is to assign each study subject to a workgroup in such a way that differences in exposure within the workgroups are minimized, as well as to maximize the contrasts in exposure between workgroups. To reduce the misclassification of exposure and to determine if adverse health effects including mortality or cancer incidence are related to particular work activities of wafer fabrication workers, a minimum requirement of work history information on the wafer manufacturing eras, job and department at which they were exposed should be assessed. Retrospective assessment of the task that semiconductor workers performed should be conducted to determine not only the effect of a particular job on the development of adverse health effects including mortality or cancer incidence, but also to adjust for the healthy worker effect. In order to identify specific hazardous agents that may cause adverse health effects, past exposure to a specific agent or agent matrices should also be assessed.