• Food Science of Animal Resources
• /
• v.35 no.4
• /
• pp.431-440
• /
• 2015

Chicken bone is not adequately utilized despite its high nutritional value and protein content. Although not a common raw material, chicken bone can be used in many different ways besides manufacturing of collagen products. In this study, a multi-step procedure was optimized to isolate chicken bone collagen for higher yield and quality for manufacture of collagen products. The chemical composition of chicken bone was 2.9% nitrogen corresponding to about 15.6% protein, 9.5% fat, 14.7% mineral and 57.5% moisture. The lowest amount of protein loss was aimed along with the separation of the highest amount of visible impurities, non-collagen proteins, minerals and fats. Treatments under optimum conditions removed 57.1% of fats and 87.5% of minerals with respect to their initial concentrations. Meanwhile, 18.6% of protein and 14.9% of hydroxyproline were lost, suggesting that a selective separation of non-collagen components and isolation of collagen were achieved. A significant part of impurities were selectively removed and over 80% of the original collagen was preserved during the treatments.

• Journal of Korean Institute of Industrial Engineers
• /
• v.23 no.4
• /
• pp.769-778
• /
• 1997

Assembly/Disassembly Queueing Networks (ADQNs) with finite buffers have been used as a major tool for evaluating the performances of manufacturing and parallel processing systems. In this study, we present simple but effective methods which yield throughput upper and lower bounds for ADQNs with exponential service times and finite buffers. These methods are based on the monotonicity properties of throughputs with respect to service times and buffer capacities. The throughput-upper bounding method is elaborated on with general network configuration (specifically acyclic configuration). But our lower bounding method is restricted to the ADQNs with more specialized configuration. Computational experiments will be performed to confirm the effectiveness of our throughput-bounding methods.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.6 s.165
• /
• pp.1055-1064
• /
• 1999

In this wort ER(electro-rheological) clutch and MR(magneto-rheological) clutch are devised and their performance characteristics such as response time and controllability are compared. As a first step, field-dependent yield stresses of ER and MR fluids are distilled in shear mode. For reasonable comparison between two clutches, a nondimensional design model is established by choosing same design parameters of gap size and number. Following the manufacturing of two clutches, field-dependent torque level, response time to step input, mechanical Power generation to electric power consumption are experimentally measured and compared. In addition, in order to investigate torque controllability of the clutches a sliding mode controller is formulated and experimentally realized. Control bandwidths of two clutches are identified and tracking control responses for desired torque trajectories are presented.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.3
• /
• pp.119-125
• /
• 2004

Generally, it is used the compensation spring to compensate the inaccuracy of screen image induced by thermal deformation in CRT monitor. Its mechanism is bi-metallic system made of heterogeneous metals and these is bonded by laser welding. But laser welding induces the non-uniform temperature distribution and locally residual stress is yielded by these temperature deviation. This paper studies residual stress of laser weldment using FEA and hole drilling method. The results are followed. In the case of heterogeneous materials weldment, higher residual stress induced in the weldment region of SUS 304 which have larger CTE than Ni 36 and residual stress on the middle of specimen is higher by 10.9% than that of its surface Measured residual stress of SUS 304 yield 481MPa and that of Ni 36 is 140.5MPa in the vicinity of the welding region. And the residual distribution is very similar in comparison with FEA result.

• Journal of Korean Society for Quality Management
• /
• v.7 no.1
• /
• pp.3-14
• /
• 1979

The primary objective of this paper is to aid the scientists and engineers in applying response surface procedures to obtain optimum operating conditions for many technical fields, particularly, for industrial manufacturing process. When a set of data is available from an experimental design, it is often of interest to fit a second order polynomial regression model in k independent variables, and find the condition of the independent variables (e. g., temperature, pressure, etc.) that optimize the response variable (e. g., yield, strength, etc.). This paper proposes a method how to obtain the optimum operating condition, and how 10 find the condition by using the computer. A computer program written in FORTRAN language is attached for the readers who may want to use the computer program.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.402-405
• /
• 1993

This paper presents design.dynamic modeling and control issues of a novel type of an ER valve-cylinder system incorporating with an electro-rheological(ER) fluid. The yield stress of the ER fluid to be employed to the proposed system is evaluated as a function of applied electric fields. The design and manufacturing process of the ER valve which features fast system response and simple mechanism are undertaken on the basis of model parameters. The governing equation for the hydraulic and pneumatic model is constructed by incorporation with the field-dependent Bingham behavior of the ER fluid. An effective neuro controller is proposed to realize an accurate position control.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.30 no.2
• /
• pp.41-61
• /
• 2005

The concept of revenue management (RM) has been used widely in the air-transportation industry, and proven as a good system for managing perishable assets. While the airlines are the oldest and most sophisticated users of RM, these practices have been an enormously important innovation in other service industries such as the travel, the railway, the internet and the manufacturing industries. In this paper, reviewing several studies on RM, we introduce the fundamental concepts and the major models of RM covering seat allocation with multiple fare classes and overbooking. Future research directions also are suggested.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.335-338
• /
• 2004

In this study has developed analysis system for automatic inspection of FPD(Flat Panel Display) characteristic, such as brightness, view angle, color ratio in the manufacturing process. Developed system consists of inspection-sensor part, acquiring a data by 3-CCD Color CCD camera and Inspection-stage part, driving a FPD holder to rotation and tilt direction. In experiment results, we could have ensured easily brightness distribution, available view angle, color reproduce and could expect to improve the quality, productivity, and yield.

• Journal of Sericultural and Entomological Science
• /
• v.25 no.2
• /
• pp.65-68
• /
• 1984

This survey was to realize the foreign cocoon quality and to provide data for suitable reeling conditions. Cocoons were inported from Taiwan (7 packs) and Hongkong (12 packs) in 1983. The practical inspection and classiffication of above cocoon was performed at Provincial Institute of cocoon testing and tested data were collected to evaluate the cocoon quality. The results were as follows. 1. It showed higher variation of the average raw silk yield percentage and cocoon assorting rate than domestic cocoon. 2. In view of the low quality products, cocoon price was expensive and most of packs were evaluated as inferior grade. 3. It was supposed that importing the superior quality cocoon from foreign country may be contributed to manufacturing of silk commodity of higher grade.

• IE interfaces
• /
• v.10 no.1
• /
• pp.79-93
• /
• 1997

지난 30여 년간 반도체 제조 공정 중 FAB공정에서 칩 수율 모델의 개발과 적용은 반도체생산 계획 및 조업 관리를 위해 반도체 제조사들에게는 중요한 관리 대상이 되어 왔으며 제조업체들은 다양한 수율 모델들을 각 업체의 조건에 맞게 채택, 적용하여 왔다. 집적 기술의 발전은 반도체 칩의 크기에도 변화를 가져와 웨이퍼상의 결점들이 형성하는 클러스터를 설명할 수 있어야 했으며 칩 면적의 증가는 새로운 수율 모델을 개발케 하였다. 본 논문은 반도체 제조 공정에 대한 고찰과 수율 계산에 영향을 미치는 결점의 클러스터 효과 및 결점 크기를 중심으로 하는 치명 확률에 대하여 살펴보고, 포아송 모델에서 파생된 대표적인 칩 수율 모델들에 대한 설명과 칩 면적의 변화에 따른 각 모델별 수율 계산 비교 및 반도체 수율의 이용에 대하여 기술한다.