• The Journal of Advanced Prosthodontics
• /
• v.13 no.5
• /
• pp.327-332
• /
• 2021

PURPOSE. The purpose of this in vitro study was to evaluate the accuracy of digitally designed removable partial denture (RPD) frameworks, constructed by additive and subtractive methods castable resin patterns, using comparative 3D analysis. MATERIALS AND METHODS. A Kennedy class III mod. 1 educational maxillary model was used in this study. The cast was scanned after modification, and a removable partial denture framework was digitally designed. Twelve frameworks were constructed. Two groups were defined: Group A: six frameworks were milled with castable resin, then casted by the lost wax technique into Co-Cr frameworks; Group B: six frameworks were printed with castable resin, then casted by the lost wax technique into Co-Cr frameworks. Comparative 3D analysis was used to measure the accuracy of the fabricated frameworks using Geomagic Control X software. Student's t-test was used for comparing data. P value ≤ .05 was considered statistically significant. RESULTS. Regarding the accuracy of the occlusal rests, group A (milled) (0.1417 ± 0.0224) showed significantly higher accuracy than group B (printed) (0.02347 ± 0.0221). The same results were found regarding the 3D comparison of the overall accuracy, in which group A (0.1501 ± 0.0205) was significantly more accurate than group B (0.179 ± 0.0137). CONCLUSION. In indirect fabrication techniques, subtractive manufacturing yields more accurate RPDs than additive manufacturing.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.2
• /
• pp.74-84
• /
• 2009

The study aims that high quality recycled sand by wet manufacturing system can be used in practical way through basic material property. The basic material property test was done by 4 categories, dry manufacturing system (1) tandem and (2) parallel, wet manufacturing system (3) large capacity and (4) small capacity. RS-IV is the final production of (1) to (4) method, it is tested via KS F 2573 (recycled fine aggregate). RS-IV is satisfied with 4 items, those are absolute dry density, 0.08mm sieve throughput, clay lump amount, and organic impurity substance content. However, absorptivity item has problem in (1) and (2) method, (3) and (4) method are confirmed with norms 5% low. Also, the production quality of wet manufacturing system is better than dry manufacturing system in absolute dry density, absorptivity, 0.08mm sieve throughput, and clay lump amount.

• Korean Journal of Health Education and Promotion
• /
• v.21 no.3
• /
• pp.195-211
• /
• 2004

Stress is a primary health promotion issue in worksite research because psychological distress is closely related not only to workers' health status but also to their job performance. This study identified the significant health behaviors affecting workers' job-related stress in Korean manufacturing industry with the national survey data conducted by the Korean Occupational Safety and Health Agency in 2003. A total of 7,818 factory workers in 1,562 manufacturing companies participated in the Korean nation-wide occupational health survey and 3,390 workers answered that they had any stressors in their workplace among the 7,818 workers finally participated in the analysis. Participants were selected by the stratified proportional sampling process by manufacturing industry classification, company size, and company locations (8 metropolitan and 8 non-metropolitan regions) in Korea. Trained interviewers visited the target companies and interviewed the factory workers randomly selected in each company. Smoking, drinking, weight control, exercise, sleeping, break time at work, and perceived fatigue were included in the health behavior construct. Stress symptoms was consisted of physical and psychological stress with 8 items. All survey responses were anonymously coded into the SPSS statistical program and testified using stepwise multiple regression analysis. Male workers were 73.5% and the 30s were 40.0% among the age groups. The married and the high school graduate were majority with 52.1% and 61.8% each. Current smokers were 44.7% and More than 50% of the participants drank alcohol sometimes. No exercise group was 59.3% and the participants who dissatisfied with their daily sleeping hours were 43.5%. In t-test and analysis of variance, the significant general characteristics associated with physical and psychological job stress were young age (p<0.001), single marital status (p<0.001), and short working period at the present company (p<0.001). The health behaviors related to physical job stress were current smoking, weight change during the past one year (p<0.001), weight control effort (p<0.001), exercise (p<0.001), daily sleeping dissatisfaction (p<0.001), break time, and perceived fatigue (p<0.001). All 10 health behavior factors were significantly associated with psychological job stress (p<0.05). Weight change, weight control effort, exercise, daily sleeping dissatisfaction, little break at work, and high perceived fatigue were significant factors affecting job stress. Daily sleeping dissatisfaction, little break at work, little exercise, weight change for the past one year and young age were selected as the significant health behavior and general factors affecting physical job stress symptoms in stepwise multiple regression analysis. The five factors explained 18.9% of the physical stress score variance. Six factors were selected as the significant health behaviors affecting psychological job stress: daily sleeping dissatisfaction, little exercise, frequent drinking alcohol, high perceived fatigue, little break at work, and little weight control effort. The six factors explained 10.6% of the psychological stress score variance.

• The Journal of Advanced Prosthodontics
• /
• v.14 no.5
• /
• pp.315-323
• /
• 2022

PURPOSE. The purpose of this study was to investigate the effect of barium silicate filler contents on mechanical properties of resin nanoceramics (RNCs) for additive manufacturing (AM). MATERIALS AND METHODS. Additively manufactured RNC specimens were divided into 4 groups depending on the content of ceramic fillers and polymers: 0% barium silicate and 100% polymer (B0/P10, control group); 50% barium silicate and 50% polymer (B5/P5); 60% barium silicate and 40% polymer (B6/P4); 67% barium silicate and 33% polymer (B6.7/P3.3). The compressive strength (n = 15) and fracture toughness (n = 12) of the specimens were measured, and scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDS) analyses were performed. Independent sample Kruskal-Wallis tests were performed on the compressive strength and fracture toughness test results, and the significance of each group was analyzed at the 95% confidence interval through post-tests using the Bonferroni's method. RESULTS. B6/P4 and B6.7/P3.3 exhibited much higher yield strength than B0/P10 and B5/P5 (P < .05). Compared to the control group (B0/P10), the other three groups exhibited higher ultimate strength (P < .05). The fracture toughness of B6/P4 and B6.7/P3.3 were similar (P > .05). The content of barium silicate and fracture toughness showed a positive correlation coefficient (R = 0.582). SEM and EDS analyses revealed the presence of an oval-shaped ceramic aggregate in B6/P4 specimens, whereas the ceramic filler and polymer substrate were homogeneously mixed in B6.7/P3.3. CONCLUSION. Increasing the ceramic filler content improves the mechanical properties, but it can be accompanied by a decrease in the flowability and the homogeneity of the slurry.

• IE interfaces
• /
• v.10 no.3
• /
• pp.95-107
• /
• 1997

In this paper, we suggest the system analysis method that integrate IDEFO and IDEFIX. Based on the method, we propose the procedure which can be used to build CALS/EC system in manufacturing industry. Also, applying the procedure and method to electronic company, we construct the CALSEC prototype system. With the three types of view-point, process, information technology and standard, we proceed the implementation of CALS/EC in manufacturing industry. We divide the electronic company's process into five core process, 1)processes-product concept planning process. 2)product development process, 3)procurement process, 4)delivery/distribution process and 5)customer service process.

• Journal of Environmental Health Sciences
• /
• v.13 no.2
• /
• pp.45-49
• /
• 1987

This study was carried out to determine the content of heavy metals in Crayons and Oil Pastele. Samples were collected from 3 manufacturing companies of Crayons and 2 manufacturing comppanies of Oil Pastele. The content of lead and cadmium were analyzed by flame atomic absorption spectrophotometer. The results obtained were as follows: 1. The average content of lead in Crayons and Oil Pastele were 26.2 ppm, 70.5 ppm, and the range 11.0-69.5 ppm, 26.5-353.0 ppm respectively. 2. The average content of cadmium in Crayons and Oil Pastele were all 4.1 ppm and range were 3.0-5.0 ppm, 2.5-5.0 ppm respectively.

• Journal of Korean society of Dental Hygiene
• /
• v.9 no.4
• /
• pp.559-568
• /
• 2009

Objectives : In order to manage to reformative tendency of the educational whole with change request of dental hygienics education which is diversificated and professionalized the manufacturing practice of a temporary resin jacket which is educated with from much dental hygiene is become accomplished, so far also the recognition which relates with the manufacturing practice of a temporary resin jacket of dental hygiene students there is not researched. The present research carried out the practice evaluation with the target of students of a dental hygiene department, who finished a manufacturing practice of a temporary resin jacket, analyzed and investigated the material, reported its result, and enforced a research. Methods : This research selected students of 6 dental hygiene departments located in the Daegu Gyeongbuk region, who have manufacturing experience of a temporary resin jacket, by a convenient sampling method, and then a questionnaire was executed by a self-administration method, and a total of 290 copies were statistically treated. The content of the questionnaire are composed of 2 questions on an attitude survey before and after manufacturing practice of a temporary resin jacket, 3 questions on an educator for practice of a temporary resin jacket, 7 questions on recognition of technical skills for manufacturing a temporary resin jacket, 9 questions on the practice content evaluation of manufacturing of a temporary resin jacket and recognition on manufacturing practice of a the temporary resin jacket. Results : 1. The average of recognition on technical skills for manufacturing a temporary resin jacket of a dental hygienist was 3.82 points, the average of evaluation on practice content of manufacturing a temporary resin jacket being 3.75 points, and the average of recognition on the practice of manufacturing a temporary resin jacket was 3.71 points. 2. Currently, as the educator for the practice of manufacturing a temporary resin jacket, dental hygienists were 188 persons(64.8%) and dental technicians was 102 persons(35.2%), and as educators they want in the future, dental hygienists were 97 persons(33.3%) and dental technicians was 193 persons(66.7%). Persons hoping reeducation for manufacturing a temporary resin jacket were 219 persons(85.9%). 3. There was a significant difference in consciousness of students before and after practice of manufacturing a temporary resin jacket(p<.001). 4. There was a significant difference in practice evaluation and practice recognition according to the educational subject(p<.001). 5. There was a significant reverse correlation in the educational subject, practice evaluation and practice recognition(p<0.01). Conclusions : The practice for manufacturing a temporary resin jacket in education of dental hygiene is necessary to improve job performance ability in more various and specialized dental treatment and to solve desire for improvement of professional technical skill ability of students, and accordingly. About study process of the future students observation investigation or student objective interview investigation etc. seeks a problem in the become research lead, the succeeding research which gropes the plan which is the possibility of solving the problem which discovered is thought will be necessary.

• Journal of Preventive Medicine and Public Health
• /
• v.22 no.4 s.28
• /
• pp.474-479
• /
• 1989

This research was conducted to evaluate the effect of improvement in work environment and of segregation in a fluorescent lamp manufacturing factory. Among the total of 80 workers, 8 workers whose mercury concentration in urine reached a hazardous level ($200-299{\mu}g/l$) were moved to mercury free workplace. The follow-up examination for their mercury concentration in urine was done three times ; on May 3, 1988, September 1, 1988 and April 3, 1989. The results were as follows : 1. Mercury concentration in the air was reduced from 0.140 to 0.107 $mg/m^3$ in 4 months, and to $0.087mg/m^3$ in one year after environmental improvement in workplace. However the level still exceeded the Threshold Limit Value. 2. The geometric mean of urinary mercury concentration among 80 workers was $173.0{\mu}g/l\;(5.1{\sim}458.6{\mu}g/l$). The distribution of workers according to urinary mercury concentration showed that 9 workers (11.2%) were above the mercury poisoning level ($300{\mu}g/l$), 24 workers (30.0%) were $200-299{\mu}g/l$, 35 workers (43.8%) were $50-199{\mu}g/l$, and 12 workers (15.0%) were below 50 ${\mu}g/l$. 3. Among the 24 workers whose urinary mercury concentration was 200-299 $50-199{\mu}g/l$, 8 were able to be followed up. Their mean urinary mercury concentration before segregation was $244.9{\mu}g/l$, but decreased to $151.4{\mu}g/l$ in four months, $128.8{\mu}g/l$ in six months, and $46.8{\mu}g/l$ in one year after segregation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.123-127
• /
• 2000

In order to investigate the influence of manufacturing process on the electrical properties, we used two kinds of low density polyethylene prepared using metallocene catalyst (mL), linear low density polyethylene prepared using Ziegler catalyst (LL) and low density polyethylene by high pressure process (LD). mL has the narrowest composition and molecular weight distributions. We measured the dc and impulse breakdown strengths and current densities at 3$0^{\circ}C$, 6$0^{\circ}C$ and 9$0^{\circ}C$. mL had a higher breakdown strength and a lower high-field current than LD and LL. These results were discussed from the point of manufacturing processes.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.3_1spc
• /
• pp.537-543
• /
• 2013

A water-$Al_2O_3$ nanofluid was manufactured, and its thermal conductivity was measured in this study. The measurement was performed at volumetric concentrations of 0.5%, 1%, 2%, and 3%, and the nanoparticle sizes were 20 nm and 70 nm. Experimental test equipment, using the transient hot wire method, was installed to measure the thermal conductivity of the nanofluid, and the measured results were confirmed by measuring pure water with a measurement error of 0.92% at $20^{\circ}C$. The thermal conductivity enhancement ranged from 4.8% to 13.6% for the 20 nm particle size, and from 3.1% to 8.8% for the 70 nm particle size at a concentration range of 0.5% to 3%. The enhancement increased with a decrease in particle size and an increase in concentration. With the elapse of time after manufacturing the nanofluid, the thermal conductivity enhancement decreased significantly from 5 to 9 h, and this trend was measured under all of the measurement conditions. After 24 h, the enhancement ranged from 1.2% to 3.5% for the 20 nm particles, and from 0.6% to 2.3% for the 70 nm particles. The enhancement trends with the elapse of time were almost identical with and without stirring the nanofluid. SDBS (Sodium Dodecyl Benzene Sulfonate) was added as a dispersing agent, and the decrease in the thermal conductivity enhancement was delayed.