• Journal of Conservation Science
• /
• v.33 no.6
• /
• pp.485-495
• /
• 2017

The purpose of this study is to evaluate the functionality and lightfastness of the natural pigments according to the type of Seokganju used as Dancheong. The commercially available red iron-oxide-based natural pigments that are called Seokganju and Daija manufactured by traditional methods in Korea and Japan were selected. The analysis of the constituent minerals and constituents of 8 kinds of collected Seokganju showed that most of them contained hematite. There are two types of Seokganju according to the $Fe_2O_3$ contents. The type of Seokganju can be characterized not only using the main component but also from the burn-out processing. The chromaticity results for Seokganju with a high $Fe_2O_3$ concentration indicate dark red or grayish brown, while those for Seokganju with a low $Fe_2O_3$ concentration indicate yellowish red or yellowish brown. Samples were prepared by mixing with a glue solution and functional properties were evaluated based on the opacity and spreadability. Coated samples were used in the lightfastness test. The spreadability and opacity of the pigments were measured differently depending on the main component. Most Seokganju samples a showed slight color change until $9,000kJ/m^2$ but rapid color changes were detected after $18,000kJ/m^2$. In particular, burnt Seokganju showed superior lightfastness.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.6
• /
• pp.243-249
• /
• 2018

Ceramic tiles, which were manufactured through high-temperature firing process at over $1000^{\circ}C$, are widely used as interior and exterior materials for building construction due to their excellent durability and aesthetic of surface glaze. In recent years, the introduction of digital ink-jet printing in ceramic tiles for architectural use has been rapidly proceeding, and studies on the materials such as ceramic ink, ceramic pigment, glaze have been actively conducted. In this study, the effect of microstructure change of surface glaze on the printing properties of ceramic inks was investigated by micronization of kaolin, which is the raw material of surface glaze. Black ceramic ink was used for ink-jet printing on the surface glaze of ceramic tile to evaluate the printability by measuring the size and roundness of the printed ink dot. The relationship between microstructure change of surface glaze and printability of ceramic ink was also investigated by analyzing the surface roughness and internal micropore distribution of surface glaze.

• Journal of Conservation Science
• /
• v.36 no.6
• /
• pp.533-540
• /
• 2020

Mt. Neoseongsan (NSS) is the only natural Neorok source in Korea. The geological, historical, and cultural values of NSS were recognized in 2013, and NSS has since been designated and maintained as a natural monument (No. 547), which has restricted the research and utilization of NSS Neorok. The limited NSS Neorok supply has hindered the restoration research of traditional pigments. Recently, a large amount of Neorok has been mined from Mt. Gwangeongsan (GJS) and is expected to be the main supply source of Neorok for restoring traditional pigments. Therefore, this study analyzed the characteristics of NSS- and GJS-Neorok-based pigments to evaluate the feasibility of substituting GJS Neorok for NSS Neorok in pigments. The NSS Neorok was mostly comprised of celadonite, whereas the GJS Neorok included minerals containing glassy phases such as celadonite, cristobalite, tridymite, etc. Because both Neorok samples were vitrified under identical conditions, the GJS Neorok grains were larger than the NSS Neorok ones. The GJS Neorok pigment showed that the chromaticity, grain size, oil absorption, and stability varied depending on the mineral types and contents. In particular, GJS-2 and NSS Neorok showed similar mineral compositions, physical properties, and stabilities, suggesting that GJS-2 can be substituted for NSS Neorok, which has been difficult to source and utilize ever since NSS was designated as a natural monument.

• Korean Journal of Poultry Science
• /
• v.7 no.2
• /
• pp.37-46
• /
• 1980

Hand deboned and mechanically deboned chicken meat were produced from domestic broilers and spent layers. Meat yield, chemical composition, functional characteristics, stability during storage, and microbiological properties were investigated Chicken patties and frankfurters were also manufactured by varying the relative proportion of MDCM to HDCM as raw materials, ana their palatability, shelf-life and textural properties were evaluated. The obtained results were as follows: 1) 35% of carcass wt was recovered as HDCM and 45% as MDCM, total meat yield reaching 80% of carcass wt. 2) Moisture, protein, fat, ash and Ca content of MDCM were 65, 12, 20, 1.7 and 0.2-0.4%,respectively. MDCM was higher in fat, ash and Ca, but significantly lower in moisture and protein. Total pigment content of MDCM was 2.5 times higher than that of HDCD such high content being attributed to the increased inclusion of hemoglobin. 3) The emulsifying capacity (ES) of MOCM per g meat was only 70% that of HDCM. but when ES was expressed on unit g of protein basis MDCM showed even higher ES than HDCM primarily due to tile higher proportion of salt soluble protein fraction. 4) Since the TBA values of MDCM increased rapidly after 4 weeks of frozen storage at -20$^{\circ}C$, the maximum possible storage period of MDCM is estimated to be about 4 weeks. 5) Total microbial counts of MDCM was approximately 1.8${\times}$10$\^$6/g/, showing no great difference from HDCM or red meat. 6) Chicken patty containing MDCM showed gradual increase in TBA value during frozen storage, but its storage up to 8 weeks presented no problems in flavor stability. 7) Color score an4 total palatability of chicken Patty were best for the product containing 30% MDCM. It was also concluded that MDCM can be included in the patties up to 50% of total meat with good results, but more than 70% was not recommended 8) The formulation of MDCM up to 50% in frankfurter gave quite satisfactory acceptability and textural properties comparable to frankfurter made of 100% MDCM, but the inclusion of more than 70% MDCM was not recommended 9) The TBA value of frankfurter containing MDCM did not increase to any great extent until 4 weeks of storage at 4$^{\circ}C$, indicating no unique problems in flavor instability compared to regular frankfurter. 10) It was concluded that processed meat products such as patties and frankfurters containing MDCM up to 30-50% of total meat ingredients gave satisfactory results in color, texture and palatability, comparable to regular products.