• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.11
• /
• pp.83-88
• /
• 2019

In this study, the high-temperature high-pressure vessel was successfully manufactured, which can be used to store pressurized air and to increase the temperature for the mix performance test of high-temperature high-pressure air with coolant (e.g., water). In this research, static structure analysis and transient thermal analysis were performed using the commercial software Midas NFX 2015 R1. Based on the results, the optimized pressure vessel design was carried out. As a result of the optimized design, the minimum stress and minimum weight were found at 120 mm of the vessel thickness, and the optimized pressure vessel was verified. Finally, through manufacture and performance test (e.g., the non-destructive inspection and hydraulic pressure test), the reliability and safety were validated for the designed pressure vessel.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.288-291
• /
• 2003

The technology and performance of the world-largest 54-inch LCD TV using PVA mode have been introduced from two points of view: one is to manufacture large-size panels, the other is to improve electro-optical performance required for multimedia applications. Current ongoing research activities that have been explored include new stitching design, one drop filling with column spacer, response time less than one frame rate, color performance and light efficiency enhancement.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.157-161
• /
• 2004

Urban transit is system that offer target Performance and function because various lower part system such as vehicles, signaling, power supply, rail track is consisted as complex. It is important first of all that describe correctly system requirement until configuration of system, design, manufacture, installation and test verification so that the complicated urban transit system is to act safety and reliable and to display target Performance and function properly. The system requirement assist the system developer to comprehensive the performance and function of system in basic design. Therefore, In this paper wishes to study way to analyze system of system requirement and apply to Urban transit.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.6
• /
• pp.29-37
• /
• 2020

This research seeks to determine the influence of investment opportunity set (IOS); profitability (Return on Assets - ROA), liquidity, business risk and firm size on debt policy. We used 42 manufacturing companies registered on the Indonesian Stock Exchange (Bursa Efek Indonesia) as object research. We used purposive sampling method to determined samples, consider the period observation from 2012 to 2016, and produce 168 units analysis. Data analysis uses the multiple regressions with the SPSS tools. The results of the study found that companies' debt policies in Indonesia are negatively affected by the liquidity. Investment opportunity set (IOS) has negative effect on debt policy. Meanwhile, ROA, Return on Invested Capital (ROIC), and firm size of a company has no impact on debt policy. These findings indicate that Indonesian manufacture companies do not see the high investment opportunity set and profitability as a policy basis for increasing debt. Moreover, the high profitability also does not cause companies to increase their debt ratio. Our study indicates that Indonesian manufacture companies use internal funds to fund their investment. This finding is a concern for creditors, as they can now see the ability of the companies, and especially their performance, in determining their credit policies.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.4 no.1
• /
• pp.124-136
• /
• 2001

In this paper, we designed and manufactured the Ku-band circular waveguide antenna to do wireless communication with a ground radar as on-board antenna of missile. Using the MATLAB and the HFSS, we designed the circular polarizer which has a characteristic of circular polarization and broadband using the capacitive pin method, the feeder to feed coaxial line to circular waveguide, and a stopper to prevent a conductor material from being inserted. Then we simulated the designed antenna using the HFSS, obtained the gain and the radiation pattern. Because of a difficulty of manufacture, we established a manufacture process procedure. Antenna is manufactured with this procedure, test results of the manufactured antenna are the axial ratio of 1.37 ~ 1.72, the 3 ㏈ beamwidth of $72.23^{\circ}{\sim}78.54^{\circ},$ and the gain of 3.26 ~ 4.61 ㏈ within frequency band. We knew that these results are similar with simulation results. Also, we confirmed that the manufactured antenna is satisfied with requirement conditions through performance test, environmental test and flight test.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.4
• /
• pp.18-26
• /
• 1991

This study was carried out to examine not only the effect and the process of activation of aluminum sulfate for the manufacture of PB and MDF, but also application of the activation treatment to PB and MOF made with MDI adhesive. The results were as follows: 1. For the manufacture of PB, activating effect did not take place Because the low moisture content of 30% in the process of activation treatment made probably insufficient activation. It needs to examine higher moisture content for the uniform and enough activation same as that of MOF. 2. In the case of MOF, Activating effect was excellent, it showed not only better results of MOR 48%, MOE 29%, IB 60% than those of the control but also better dimensional stability. 3. Application of alum activation to the PB and MDF made with MDI adhesive yielded no effects. Maybe it was the reson that the curing mechanism of MDI is different. 4. Modifing the wood surface was the oxidation and wettability was not the variable limiting glueline performance. It is necessary to make a more study about activating reaction.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1710-1716
• /
• 2008

The Loop Heat Pipe (LHP) operates to pump the working fluid by means of the capillary force in a wick structure. Particularly, it is difficult to design and manufacture the evaporator consisted of a grooved container and a compensation chamber as well as the wick structure. This study is related to design and manufacture the grooved container coupled with wick structure, the properties of the wick structure such as the permeability, the porosity, and the maximum capillary pressure were measured to apply the cooling technology for Insulated Gate Bipolar Transistor (IGBT). The container of the LHP was manufactured by the electrical discharge process and the wick structure was sintered with the nickel particle by an axial-press apparatus with the pulse electronic discharge. As results, the properties of the wick were experimentally obtained about 60% of the porosity, 35kPa of the maximum capillary force and $1.53{\times}10-13m2$ of the permeability.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.12
• /
• pp.174-181
• /
• 2004

Ultra precision positioning mechanism has widely been used on semiconductor manufacturing equipments, optical spectrum analyzer and cell manipulations. Ultra precision positioning mechanism is consisted of several actuators, sensors, guides and control systems. Its efficiency depends on each performance of components. The object of this study is to design, analysis and manufacture all of the inchworm linear motor system, which is one of the equipments embodied in ultra precision positioning mechanism. Inchworm linear motor system is consisted of a controller system and an inchworm linear motor, and its driving form is similar to a motion of spanworm. A design and manufacture of inchworm linear motor, which is consisted of three PZT actuators, a rod, two columns and a guide plate, are performed. Minimizing the von-Mises stress of the hinge using Taguchi method and simulation by FEM software optimizes the structural design in a column of flexure hinge. The designed columns and guide plates are manufactured by a W-EDM and NC-milling. A controller system, which is an apparatus to drive inchworm linear motor, can easily adjust driving conditions by varying resonance frequency and input-output voltage of actuators and amplifiers. The performance of manufactured inchworm linear motor system is verified and valuated. In the future, inchworm linear motor system will be used to make a more precision positioning by reinforcing a sensor and feedback system.

• Magazine of the Korea Concrete Institute
• /
• v.16 no.5 s.82
• /
• pp.49-58
• /
• 2004

• International Journal of Safety
• /
• v.7 no.1
• /
• pp.30-34
• /
• 2008

For the purpose of establishing basic design standards for the manufacture of wheelchairs, a dummy for an ISO-standard wheelchair was modeled for use with a manufactured wheelchair, and the safety and performance of the wheelchair were examined through numerical simulations.