• 한국해안·해양공학회논문집
• /
• 제23권1호
• /
• pp.43-49
• /
• 2011

최근 친환경항만(Eco-port)을 건설하려는 노력과 쾌적한 워터프론트 개발에 관한 관심이 고조되면서, 항만의 방파제를 중심으로 수질개선을 위한 다양한 연구가 진행되고 있다. 이러한 항 내의 수질개선을 위한 연구로서 최근 해수교환방파제가 주목받고 있지만, 여전히 항 내 안쪽의 영역에서는 해수교환방파제로부터 유입된 해수가 도달하지 못하여 해수의 순환이 잘 안 되는 단점을 가지고 있다. 본 연구에서는 이러한 해수교환방파제의 단점을 보완하고자, 다기수로라는 새로운 개념의 해수교환방파제를 도입하여, 항 내 안쪽 영역까지 해수의 순환을 촉진할 수 있는 방법을 모색하였다. 이를 위해서 현재 해수교환방파제가 설치된 주문진 항에 가상의 다기수로를 설치하고, 수중유출구의 위치, 크기, 방향을 제어하여 해수유입에 따른 항 내 유동패턴을 비교 검토하고, 해수순환을 촉진시킬 수 있는 방법을 모색하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.231-234
• /
• 1996

This paper considers the output regulation problems on uncertain systems. Using NR-estimator(on-line), a family of equilibrium points for the uncertain system is computed. The state variables of the closed loop system track the average value of the obtained equilibrium manifold by dynamic state feedback control.

• 대한기계학회논문집
• /
• 제15권5호
• /
• pp.1674-1682
• /
• 1991

본 연구에서는 4기통 고속 가솔린 기관의 흡기관 내 유체유동이 체적효율에 미치는 동적효과를 고려하여, 흡기관에 임피던스를 이용한 음향학적 방법을 이용해서 흡기관 최적설계를 해석하고, 기관실험을 통해 그 신뢰성을 확인하고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1132_1133
• /
• 2009

In this paper, a observer-based PI controller will be developed for PEM fuel cell system. Nonlinear model of PEM fuel cell system is introduced to study the controller design problems. Sliding mode observer will be designed to estimate the cathode and anode pressures of PEMFC system. And a nonlinear state observer is also designed to estimate the other states such as supply manifold pressure, Oxygen pressure, Hydrogen pressure, return manifold pressure, etc. These estimated states are used to design the observer-based PI controller. The validity of the proposed controller will be verified by using computer simulation.

• 소성∙가공
• /
• 제18권2호
• /
• pp.156-159
• /
• 2009

Slot coating has been wide spread in photo-resist coating on the glass for liquid crystal display. Die in slot coater consists of manifold and land. Material comes in inlet of the die and flow into the manifold and then flow out through the land. The coating thickness variations along the die length depend upon inside of die design such as manifold and die land. However the coating thickness variations along the moving direction(coating direction) of the coater depend upon the operational conditions of coater as well as die lip design. The coating behaviors including atmospheric air have been investigated in this study. Die geometries considered in this study were nozzle gap and length of the die lip. Coating gap and coating speed were the variables fur coating operational conditions. When the nozzle gap and length of die lip increased climbing effect of PR on the downstream die lip was reduced. Subsequently uniformity of coating thickness improved. Uniformity of coating thickness also enhanced as coating gap and coater speed increased. The uniformity of coating gap was related to the velocity vector distributions on the coating surface.

• 대한기계학회논문집B
• /
• 제33권11호
• /
• pp.834-839
• /
• 2009

A three-dimensional computational fluid dynamics (CFD) analysis is performed to investigate flow characteristics in the anode channels and manifold of the internal reforming type molten carbonate fuel cell (MCFC). Considering the computational difficulties associated with the size and geometric complexity of the MCFC system, the polyhedral meshes that can reduce mesh connectivity problems at the intersection of the channel and the manifold are adopted and chemical reactions inside the MCFC system are not included. Through this study, the gas flow rate uniformity of the anode channels is mainly analyzed to provide basic insights into improved design parameters for anode flow channel design. Results indicate that the uniformity in flow-rate is in the range of ${\pm}$1% between the anode channels. Also, the mal-distributed inlet flow-rate conditions and the change in the size of the manifold depth have no significant effect on the flow-rate uniformity of the anode channels.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.3120-3124
• /
• 2008

A three-dimensional computational fluid dynamics (CFD) analysis is performed to investigate flow characteristics in the anode channels and manifold of the internal reforming type molten carbonate fuel cell (MCFC). Considering the computational difficulties associated with the size and geometric complexity of the MCFC system, the polyhedral meshes that can reduce mesh connectivity problems at the intersection of the channel and the manifold are adopted and chemical reactions inside the MCFC system are not included. Through this study, the gas flow rate uniformity of the anode channels is mainly analyzed to provide basic insights into improved design parameters for anode flow channel design. Results indicate that the uniformity in flow-rate is in the range of ${\pm}1%$ between the anode channels. Also, the mal-distributed inlet flow-rate conditions and the change in the size of the manifold depth have no significant effect on the flow-rate uniformity of the anode channels.

• International Journal of CAD/CAM
• /
• 제5권1호
• /
• pp.59-68
• /
• 2005

Euclidean Voronoi diagram of spheres in 3-dimensional space has not been explored as much as it deserves even though it has significant potential impacts on diverse applications in both science and engineering. In addition, studies on the data structure for its topology have not been reported yet. Presented in this, paper is the topological representation for Euclidean Voronoi diagram of spheres which is a typical non-manifold model. The proposed representation is a variation of radial edge data structure capable of dealing with the topological characteristics of Euclidean Voronoi diagram of spheres distinguished from those of a general non-manifold model and Euclidean Voronoi diagram of points. Various topological queries for the spatial reasoning on the representation are also presented as a sequence of adjacency relationships among topological entities. The time and storage complexities of the proposed representation are analyzed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.833-835
• /
• 2002

In this paper, we propose multi-resolutional representation of B-rep solid models using the selective Boolean operations on non-manifold geometric models. Since the union and subtraction operations of the selective Boolean operations are commutative, the integrity of the model is guaranteed for reordering design features. A multi-resolution representation is established using a non-manifold merged set model and a feature modeling tree reordered according to some criterion of level of detail (LOD). Then, a solid model for a specified LOD can be extracted from this multi-resolution model using the selective Boolean operations.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.833-838
• /
• 2011

Future powertrain technologies will be developed focused on applications of eco-friendly technology for internal combustion engine, electric vehicle and Fuel Cell Electric Vehicle. But it is expected that these cutting edge technologies will not be applied immediately due to lack of infrastructure, technical and economical reasons. Therefore, numerous developments of internal combustion engine will be carried out for the time being. There have been many turbo engine developments undergoing to maximize the engine performance using turbo charger system in accordance with global trend-green technology and downsizing of engine which coincides with HMC's future development strategy. This study reviews the development process and result of plastic intake manifold module which is firstly developed for turbo engine. CAE simulation and experiments were implanted to evaluate design validity.