• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.2
• /
• pp.161-168
• /
• 2005

The catalytic oxidation of toluene in low concentration was investigated over manganese oxide/$\gamma$-A1$_{2}$O$_{3}$ catalysts. As increased manganese loading, the conversion of toluene increased at a lower temperature. The 18.2wt$\%$ Mn/$\gamma$-Al$_{2}$O$_{3}$ appeared to be the most active catalyst. XRD results indicated that most of the catalysts exist as MnO$_{2}$ and Mn$_{2}$O$_{3}$ crystalline phase. After the reaction, the used and the fresh catalysts were characterized by XPS. For the used catalyst, a prominent feature has increased. TPR profiles of 18.2 wt$\%$ Mn/$\gamma$-Al$_{2}$O$_{3}$ changed significantly as the manganese loading increased at a lower temperature.

• Environmental Engineering Research
• /
• v.19 no.1
• /
• pp.107-113
• /
• 2014

Small sized manganese dioxide particles are immobilized onto the surface of sand by the wet impregnation process. The surface morphology of the solid, i.e., immobilized manganese dioxide natural sand (IMNS) is performed by taking scanning electron microscope images and characterized by the X-ray diffraction data. The specific surface area of the solid is obtained, which shows a significant increase in the specific surface area obtained by the immobilization of manganese dioxide. The $pH_{PZC}$ (point of zero charge) is found to be 6.28. Further, the IMNS is assessed in the removal of As(III) and As(V) pollutants from aqueous solutions under the batch and column operations. Batch reactor experiments are conducted for various physicochemical parametric studies, viz. the effect of sorptive pH (pH 2.0-10.0), concentration (1.0-25.0 mg/L), and background electrolyte concentrations (0.0001-0.1 mol/L $NaNO_3$). Further, column experiments are conducted to obtain the efficiency of IMNS under dynamic conditions. The breakthrough data obtained by the column experiments are employed in non-linear fitting to the Thomas equation, so as to estimate the loading capacity of the column for As(III) and As(V).

• Journal of Environmental Health Sciences
• /
• v.27 no.4
• /
• pp.51-62
• /
• 2001

Geometric mean of airborne welding fume concentration at technical high schools was 4.80mg/㎥)N.D~35.39 mg/ ㎥ and the percentage of samples exceeded TLV of the Korean ministry of labor was 43.6%, Geometric mean of airborne Mn concentration was 0.06 mg/㎥(N.D~0.42mg/㎥) and the percentage of samples exceeded TLV of ACGIH was 15.4 % In case of airborne Me concentration, there is a significant difference among schools (p<0.05) Mn concentrations in blood of the exposed and control groups were 1.84$\mu\textrm{g}$/dl and 1.91 mg/dl respectively. Mn concentrations in urine of the exposed and control groups were 1.36$\mu\textrm{g}$/ιand 0.57$\mu\textrm{g}$/ι respectively. In case of Mn concentrations in urine there is a significant difference between both groups(P<0.001) and among schools(p<0.05) Mn concentrations in blood and urine of exposed group were not over BEIs of the Korean ministry of labor. Mn levels in blood and urine were not significantly affected by smoking, drinking and residence, There was no correlation between Mn concentration in air and blood but there was a statistically significant correlation between Mn concentration in air urine(r=0.323). There was no a statistically significant correlation between Mn concentration in blood and urine.

• Resources Recycling
• /
• v.15 no.3 s.71
• /
• pp.66-73
• /
• 2006

Continuous column adsorption experiments have been conducted fur artificial and actual wastewater which containing $Ni^{2+}$ by using manganese nodule as an adsorbent for the purpose of wastewater treatment along with an increased $Ni^{2+}$ recovery in the refining of manganese nodule. The adsorption features of $Ni^{2+}$ artificial wastewater were examined by taking the height of fixed bed, influent flow rate, and the initial concentration of adsorbate as the influential parameters. The adsorption capacity of manganese nodule and the rate constant for $Ni^{2+}$ adsorption were estimated employing Bohart-Adams equation. In addition, the variation of the adsorbed amount of adsorbate for each column according to the influent flow rate and the initial concentration of adsorbate was investigated based on the breakthrough curves fur each column. For serially connected columns, the adsorbed amount of $Ni^{2+}$ for each column was observed to increase gradually as the adsorption proceeded from the initial column to the final column. The variation of the breakthrough curve for actual wastewater with the height of fixed bed was not so significant as that for artificial wastewater, which was considered to be due to the high concentration of $Ni^{2+}$ in actual wastewater. Regarding the effect of the particle size of manganese nodule on adsorption, the adsorbed amount of adsorbate was found to somewhat increase as the particle size became smaller.

• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.5
• /
• pp.357-368
• /
• 2017

To establish new metal groundwater standard, 5 metals such as aluminum, chromium, iron, manganese, and selenium were evaluated by Chemical Ranking Of groundWater pollutaNts (CROWN) including possibility of exposure, toxicity, interest factor, connection standard for other media, and data reliability. 430 groundwater samples in 2013 and 2014 were collected semiannually from 110 groundwater wells and they were analyzed for selenium, manganese, iron, chromium, and aluminum. For this study, 430 groundwater samples were categorized into 3 geological distribution features, such as igneous, metamorphic, and sedimentary rock region and geological background levels were divided by pre-selection methods. For the results, the average concentrations of aluminum, chromium, iron, manganese, and selenium in 430 groundwater samples were $0.0008mg\;L^{-1}$, $0.0001mg\;L^{-1}$, $0.174mg\;L^{-1}$, $0.083mg\;L^{-1}$, and $0.0004mg\;L^{-1}$, respectively. In addition, among various geologies, average concentration of selenium was the highest in igneous rock region, average concentrations of chromium, manganese and aluminum were the greatest in sedimentary rock region, and average concentration of iron was the most high in metamorphic rock region. As a result of the geological background concentration with pre-selection method, background concentrations of selenium and aluminum in groundwater samples were the highest from sedimentary rock as $0.0010mg\;L^{-1}$ and $0.0029mg\;L^{-1}$ and background concentrations of manganese and iron in groundwater samples were the greatest from metamorphic rock as $0.460mg\;L^{-1}$ and $1.574mg\;L^{-1}$, and no chromium background concentration in groundwater samples was found from all geology.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.6
• /
• pp.539-549
• /
• 2017

In water treatment process using microfiltration membranes, manganese is a substance that causes inorganic membrane fouling. As a result of analysis on the operation data taken from I WTP(Water Treatment Plant), it was confirmed that the increase of TMP was very severe during the period of manganese inflow. The membrane fouling fastened the increase of TMP and shortened the service time of filtration or the cleaning cycle. The TMP of the membrane increased to the maximum of $2.13kgf/cm^2$, but it was recovered to the initial level ($0.17kgf/cm^2$) by the 1st acid cleaning step. It was obvious that the main membrane fouling contaminants are due to inorganic substances. As a result of the analysis on the chemical waste, the concentrations of aluminum(146-164 mg/L) and manganese(110-126 mg/L) were very high. It is considered that aluminum was due to the residual unreacted during coagulation step as a pretreatment process. And manganese is thought to be due to the adsorption on the membrane surface as an adsorbate in feed water component during filtration step. For the efficient maintenance of the membrane filtration facilities, optimization of chemical concentration and CIP conditions is very important when finding the abnormal level of influent including foulants such as manganese.

• The Korean Journal of Food And Nutrition
• /
• v.32 no.5
• /
• pp.401-407
• /
• 2019

This study compares and analyzes inorganic components of four different Pu-erh tea species consumed in Korea. The criteria for the inorganic components was based on the Royal Institute of Technology (KTH) recommendations. Out of the 19 general items: potassium, manganese, silicon and fluorine were detected in amounts exceeding the maximum allowable concentration by 5~23, 57~91, 1.6~1.8 and 9~18 times respectively. Out of the 15 potentially harmful elements: aluminum and nickel were exceeded the Maximum allowable concentration by 9~14 times and 0.8~1.2 times respectively. To reduce the concentration of inorganic elements in excess of the maximum allowable concentration, the extraction time of tea should be less than 1 minute in addition to limiting the amount. The amount of Pu-erh tea for extraction was about 0.1 g manganese, about 0.3 g potassium, about 0.5 g fluoride and about 2 g silicon. Therefore, the maximum amount of tea for extraction should be 0.1 g in regards to the safety of Pu-erh tea. Based on the recommended maximum daily intake of inorganic ingredients by the Ministry of Food and Drug Safety, it is desirable that the number of extractions be less than three.

• Journal of Environmental Impact Assessment
• /
• v.8 no.2
• /
• pp.1-8
• /
• 1999

The research centers on the concentration profile and risk assessment of toxic metals for ambient air in Taejon industrial complex. Airborne concentrations of each toxic metal for risk assessment were obtained from 2-year sampling by high volume air sampler and analysis by ICP-MS and ICP-AES in the complex. The long-term arithmetic mean of human carcinogen, arsenic, hexavalent chromium and nickel subsulfide was 5.53, 2.16 and $3.46ng/m^3$ while the mean of probable human carcinogen, beryllium, cadmium and lead was 0.08, 2.35, $293.29ng/m^3$, respectively. And the long-term arithmetic mean concentration of non-carcinogenic metal, manganese was $55.91ng/m^3$. The point risk estimate for the inhalation of carcinogenic metals was $3.6{\times}10^{-5}$, which was higher than a risk standard of $10^{-5}$. About 75% of the cancer risk was to the inhalation of human carcinogen, arsenic. Thus, it is necessary to properly manage arsenic risk in Taejon industrial complex. The point hazard index by the inhalation of manganese was 1.1. Therefore, an investigation into Taejon industrial complex is needed to obtain more fine long-term concentration data for airborne non-carcinogenic metals including manganese.

• Clean Technology
• /
• v.2 no.1
• /
• pp.60-68
• /
• 1996

The oxidation of carbon monoxide of low concentration on the natural manganese dioxide (NMD) has been investigated in a fixed bed reactor. The experimental variables were concentration of oxygen (500ppm~99.8%) and carbon monoxide (500ppm~10000ppm) and catalyst temperature ($50{\sim}750^{\circ}C$). The NMD(Natural Manganese Dioxide) has been characterized by temperature - program reduction(TPR) using 2.4% $CO/H_2$ as a reducing agent, thermogravimetric analysis (TGA), and reduction of NMD by 2.4% $CO/H_2$. It was found that the NMD catalyst activity on the unit area was greater than the $MnO_2$ catalyst for oxidation of CO at the same temperature. The thermal stability of oxidation activity was considered to be maintained when the NMD was heated to $750^{\circ}C$. The TGA, reduction by CO, and TPR of the NMD showed that the NMD had active lattice oxygen which was easily liberated on heating in the absence and low concentration of oxygen. The reaction order in CO is 0.701 between 500~3500ppm and almost zero between 3500~10000ppm of CO.

• Economic and Environmental Geology
• /
• v.19 no.4
• /
• pp.265-276
• /
• 1986

The Jangseong manganese deposits are supergene oxidation products of hydrothermal rhodochrosite. The manganese ore veins are developed in the Dongjeom Quartzite, and Dumudong Formation. The deposits consist of primary manganese carbonate ores in the deeper part and manganese oxide ores near the surface. The manganese carbonate ores are composed of rhodochrosite and small amounts of sulfides. The manganese oxide ores are composed of birnessite, nsutite, todorokite, chalcophanite, and pyrolusite. Microscopic, X-ray diffraction, infrared, thermal and EPMA analyses have been made for manganese oxide minerals and other associated minerals. The manganese minerals were formed in the following sequence. Rhodochrosite$\rightarrow$birnessite$\rightarrow$todorokite$\rightarrow$nsutite-pyrolusite. Thermochemical properties of chalcophanite were studied by methods of X-ray powder diffraction, infrared absorption spectroscopic analysis and dehydration experiments. Chalcophanite changes to $4.8{\AA}$ phase at $90{\sim}110^{\circ}C$. Chemical analyses show that the manganese oxide minerals generally have high concentration in Zn.