• 비파괴검사학회지
• /
• 제25권4호
• /
• pp.254-261
• /
• 2005

지금까지 한국인의 치아 통계는 매우 부족한 상태이고, 대부분 치아형태의 정보를 얻기 위해 방사선학적 방법을 이용하거나, 치아를 절단하는 등의 방법으로 연구를 해왔다. 이와 같은 방법은 오랜 시험 기간을 필요로 하고 정밀도가 낮고 파괴적인 방법을 주로 이용한 것이므로, 이제는 한국인의 표준 치아에 대한 정밀한 데이터를 얻기 위해 새로운 비파괴적인 시험이 필요하다. 이를 위하여 각각의 하악 제1소구치를 미세단층촬영기(Micro-CT, SkyScan, Belgium)를 이용하여 $21.31{\mu}m$의 해상도로 교합면에 대한 수평면으로 0.022mm 로 Scan을 하였다. 이를 통하여 내 외부 형태학적 중요부위를 측정하였으며, 영구 치아의 평균 치수표로 사용했었던 G. V. Black(1836-1915)에 의해 제시된 수치와 비교하였다.

• The Journal of Advanced Prosthodontics
• /
• 제11권3호
• /
• pp.187-192
• /
• 2019

PURPOSE. The purpose of this in vitro study was to investigate the fracture loads and modes of failure for the full range of natural teeth under simulated occlusal loading. MATERIALS AND METHODS. One hundred and forty natural teeth were taken from mandibles and maxillas of patients. There were 14 groups of teeth with 10 teeth in each group (5 males and 5 females). Each specimen was embedded in resin and mounted on a positioning jig, with the long axis of the tooth at an inclined angle of 30 degrees. A universal testing machine was used to measure the compression load at which fracture of the tooth specimen occurred; loads were applied on the incisal edge and/or functional cusp. RESULTS. The mean fracture load for the mandibular first premolar was the highest (2002 N) of all the types of teeth, while the mean fracture load for the maxillary first premolar was the lowest (525 N). Mean fracture loads for the mandibular and maxillary incisors, and the first and second maxillary premolars, had significantly lower values compared to the other types of teeth. The mean fracture load for the teeth from males was significantly greater than that for the teeth from females. There was an inverse relationship between age and mean fracture load, in which older teeth had lower fracture loads compared to younger teeth. CONCLUSION. The mean fracture loads for natural teeth were significantly different, with dependence on tooth position and the sex and age of the individual.

• 대한소아치과학회지
• /
• 제8권1호
• /
• pp.21-24
• /
• 1981

The author observed a case of ectopic erupted maxillary second premolars and impacted mandibular second premolars due to premature loss of the primary second molars. The treatments were done as follows: 1. In the maxilla, the teeth arrangement problem was corrected with removal of the ectopic erupted second premolars. 2. In the mandible, normal dentition was established with surgical removal of the left second premolar and removal of the permanent first molar in right side combined by orthodontic therapy.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.977-978
• /
• 2010

• 대한치과기공학회지
• /
• 제24권1호
• /
• pp.107-126
• /
• 2002

The first function of occlusion is mastication. Therefore the functional restoration of occlusal surface is very important. The restoration of occlusal surface is three method as wax bite technique, F.G.P. technique, cone technique. Many dental technician is using compound method. I am using compound method of wax bite technique and cone technique. I have knew common point on each teeth during I have waxing up wax pattern. So I studied on the design waxup technique for mandible molar occlusion. The results of the study were as follows; 1. The dam wax up method can restore axial contour of teeth very easy and make short working time of wax pattern. 2. The height of dam must be same with cusp of adjacent teeth. 3. Automatically the contour of tooth is appeared if the contour of dam is relationship with cuspid line of adjacent teeth. 4. The height of contour of buccal, lingual surface is formed natural curve to add fluid wax by gravitation. 5. The development groove of mandible first premolar is appeared V form. 6. The development groove of mandible second premolar is appeared Y form. 7, The development groove of mandible first molar is appeared M form. 8. The development groove of mandible second molar is W form. 9. The embrasure is formed to carve around contact point area as round convex. It affects to axial form of tooth. 10. The buccal, lingual groove of molar is formed parallel with direction of teeth arrangement.

• 대한치과보철학회지
• /
• 제31권4호
• /
• pp.580-610
• /
• 1993

The purpose of this study was to analyse the deflection and stress distribution at the supporting bone and it's superstructure by the alteration of angulation between implant and it's implant abutment. For this study, the free-end saddle case of mandibular first and second molar missing would be planned to restore with fixed prosthesis. So the mandibular second premolar was prepared for abutment, and the cylinder type osseointegrated implant was placed at the site of mandibular second molar for abutment. The finite element stress analysis was applied for this study. 13 two-dimensional FEM models were created, a standard model at $0^{\circ}$ and 12 models created by changing the angulation between implant and implant abutment as increasing the angulation mesially and distally with $5^{\circ}$ unittill $30^{\circ}$. The preprocessing decording, solving and postprocessing procedures were done by using FEM analysis software PATRAN and SUN-SPARC2GX. The deflections and von Mises stresses were calculated under concentrated load (load 1) and distributed load(load 2) at the reference points. The results were as follows : 1. Observing at standard model, the amount of total deflection at the distobuccal cusp-tip of pontic under concentrated load was largest of all, and that at the apex of implant was least of all, and the amount of total deflection at the buccal cusp-tip of second premolar under distributed load was largest of all, and that at the apex of implant was least of all. 2. Increasing the angulation mesially or distally, the amounts of total deflection were increased or decreased according to the reference points. But the order according to the amount of total deflection was not changed except apex of second premolar and central fossa of implant abutment under concentrated load during distal inclination. 3. Observing at standard model, the von Mises stress at the distal joint of pontic under concentrated load was largest of all, and that at the apex of implant was least of all. The von Mises stress at the distal margin of second premolar under distributed load was largest of all, and that at the apex of Implant was least of ail. 4. Increasing the angulation of implant mesially, the von Mises stresses at the mesial crest of implant were increased under concentrated load and distributed load, but those were increased remarkably under distributed load and so that at $30^{\circ}$ mesial inclination was largest of all. 5. Increasing the angulation of implant distally, the von Mises stresses at the distal crest of implant were increased remarkably under concentrated load and distributed load, and so those at $30^{\circ}$ distal inclination were largest of all.

• 대한치과교정학회지
• /
• 제50권1호
• /
• pp.63-71
• /
• 2020

Odontogenic keratocysts (OKCs) are one of the most aggressive cysts in the oral and maxillofacial area because of their high recurrence rate and infiltrative behavior. In growing patients with OKCs, a radical treatment approach might cause numerous complications, including the disturbance of jaw growth and loss of the involved tooth. This case report describes successful comprehensive orthodontic treatment combined with marsupialization of the cyst in a young girl who exhibited an OKC with impacted teeth. The 10-year-old girl presented with an OKC extending from the mandibular symphysis through the left mandibular body, with ectopic impaction of the mandibular left canine and first premolar, as well as congenitally missing bilateral mandibular second premolars. Interestingly, spontaneous improvement of the positions of the ectopic impacted teeth, along with a reduction in the size of the cyst, occurred during marsupialization. The sequential use of removable and fixed appliances enabled orthodontic traction of the impacted teeth. The treatment outcome was stable at 2.5 years after the end of the treatment. We speculate that comprehensive orthodontic treatment combined with marsupialization can be an effective treatment strategy for patients with OKCs, especially when they are encountered in young, growing patients with impacted teeth.

• Restorative Dentistry and Endodontics
• /
• 제30권1호
• /
• pp.66-71
• /
• 2005

치근단 백악질 이형성증은 대부분 하악 전치부에서 발생하는 병소로 시간의 흐름에 따라 3단계의 독특한 방사선 사진상의 변화 양상을 보인다 (방사선 투과성기, 혼합기, 방사선 불투과성기). 특별히 1단계인 방사선 투과성기의 방사선 사진 상의 양상은 치수 괴사로 인해 발생하는 치근단 육종이나 치근단낭과 매우 유사하다. 따라서 이를 감별하기 위해서는 정기적인 방사선 사진 검사와 함께 치수의 생활력을 검사가 매우 중요하다고 할 수 있다. 하지만 본 증례에서는 해당 부위의 치아가 PFG bridge로 수복되어 있는 치수 생확력 검사를 정확하게 할 수 없었다. 또한 병소가 처음에는 하악 전치부에 발생하였으나 뒤이어 하악 견치와 소구치부에서도 연달아 발생한 특이한 소견을 보였다.

• 한국임상수의학회지
• /
• 제35권4호
• /
• pp.137-140
• /
• 2018

A five-month-old toy poodle was referred for treatment of bilateral mandibular fractures. Preoperative skull and dental radiographs showed rostral mandibular fractures and permanent teeth that had not yet erupted. In addition to providing stability for the healing of fractures, it is very important to focus on restoring normal occlusion. The mandibular fractures were repaired using interdental wiring in a dentate area where the deciduous canines and fourth premolars were stable and could be used to anchor the interdental fixation. In the absence of an erupted permanent mandibular first molar, the modified Risdon wiring was performed using the deciduous mandibular fourth premolars as anchor teeth. An intraoral splint was placed on the mandibular teeth using self-curing composite resin. Five months after surgery, the patient had experienced no complications, and the permanent teeth had erupted normally. In this case, which involves a small-breed puppy with deciduous dentition, treatment with a wire-reinforced interdental splint using intact deciduous fourth premolar teeth as anchor teeth can be considered as a suitable method for rostral mandibular fracture restoration.

• 대한치과교정학회지
• /
• 제26권5호
• /
• pp.535-546
• /
• 1996

이 연구는 한국인 하악치열궁 형태를 분류하고, 교두정에서 브라켓 높이의 협면점까지 거리를 계측하여 이상적인 호선 제작에 도움을 얻기위하여 시행되였다. 13세에서 25세사이의 정상적인 교합자 159명의 석고모형을 대상으로 순측 및 협측 교두정을 지나는 하악치열궁선에서 견치간, 제1대구치간 및 제2대구치간 폭경과 이들의 고경을 계측한 다음, 유클리안 거리를 이용한 평균군집분석을 시행하여 치열궁형태를 5가지로 분류하고, 각각의 6차 다항식과 결정계수를 구하였으며, 교두정에서 브라켓 높이의 협면점까지의 거리를 계측하고 비교검토하여 다음의 결과를 얻었다. 1. 5가지 하악치열궁선을 실제의 크기로 작도하고, 1형, 2형, 3형, 4형 및 5형으로 명명하였다. 2. 각각의 치 열궁선은 하악 제2대구치간 폭경으로 표현되는 6차다항식과 결정 계수를 산출하였으며 이 식으로 $97\%$이상 설명이 가능하였다. 3. 각 치열궁선의 분포는 5형이 $24.5\%$로 가장 많았으며, 2형과 3형이 각각 $20.8\%$ 1형은 $17.6\%$, 4형은 $16.3\%$의 분포를 보였다. 4. 한국인의 하악치열궁선은 프랑스인에 비하여 폭경이 넓고 고경이 낮은 특성을 보였다. 5. 교두정에서 브라켓높이의 협면점까지의 거리는 절치가 1.0, 견치는 1.9, 제1소구치는 2.6, 제1 및 제2 대구치는 2.7 이였다.