• 대한치과교정학회지
• /
• 제47권1호
• /
• pp.21-30
• /
• 2017

Objective: The aim of this study was to investigate the three-dimensional (3D) position of the center of resistance of 4 mandibular anterior teeth, 6 mandibular anterior teeth, and the complete mandibular dentition by using 3D finite-element analysis. Methods: Finite-element models included the complete mandibular dentition, periodontal ligament, and alveolar bone. The crowns of teeth in each group were fixed with buccal and lingual arch wires and lingual splint wires to minimize individual tooth movement and to evenly disperse the forces onto the teeth. Each group of teeth was subdivided into 0.5-mm intervals horizontally and vertically, and a force of 200 g was applied on each group. The center of resistance was defined as the point where the applied force induced parallel movement. Results: The center of resistance of the 4 mandibular anterior teeth group was 13.0 mm apical and 6.0 mm posterior, that of the 6 mandibular anterior teeth group was 13.5 mm apical and 8.5 mm posterior, and that of the complete mandibular dentition group was 13.5 mm apical and 25.0 mm posterior to the incisal edge of the mandibular central incisors. Conclusions: Finite-element analysis was useful in determining the 3D position of the center of resistance of the 4 mandibular anterior teeth group, 6 mandibular anterior teeth group, and complete mandibular dentition group.

• 치과방사선
• /
• 제15권1호
• /
• pp.67-74
• /
• 1985

The incidence and associated dental abnormalities of taurodontism were studied radiographically (panoramic view) in 1895 patients of deciduous dentition and 2167 patients of permanent dentition who had visited to the Department of Oral Radiology, Kyung Hee University in Korea. The obtained results were as follows: 1. The prevalence of taurodontism was 3.59% in the deciduous dentition group, and 1.8% in the permanent dentition group. 2. There was no definite sex difference in the deciduous dentition, and the permanent dentition group. The type of mesotaurodontism was predominent in the deciduous dentition group, and hypotaurodontism in the permanent dentition group. 4. The vast majority of this abnormalities had occurred in the mandibular 1st deciduous molar in the deciduous dentition group, and mandibular 2nd permanent molar in the permanent dentition group. 5. Of the cases with taurodontism, the deciduous dentition group revealed 95.6% bilaterally, and 82% bilaterally in the permanent dentition group. 6. Multiple teeth occurance, not single tooth only, were involved in 98.5% of the cases in the deciduous dentition group, and 82% in the permanent dentition group.

• 대한치과교정학회지
• /
• 제47권2호
• /
• pp.142-147
• /
• 2017

The purpose of this study was to investigate immediate changes in the mandibular dentition after maxillary molar distalization using headgear in non-growing patients. Sixteen patients (mean age, $18.9{\pm}2.0$ years) with Class II molar relationship and crowding were included in the present study. To correct the molar relationship, headgear was used for maxillary molar distalization. Cone-beam computed tomography-generated half-cephalograms (CG Cephs) and dental casts were used to evaluate dental changes for each subject before and immediately after molar distalization using headgear. The mean duration that subjects wore the headgear was 6.3 months. CG Cephs showed that the first maxillary molars were distalized $4.2{\pm}1.6\;mm$ with $9.7^{\circ}{\pm}6.1^{\circ}$ of distal angulation. The intercanine, interpremolar, and intermolar widths of the mandible increased after maxillary molar distalization. The present study's results suggest that maxillary molar distalization using headgear induces a spontaneous response in the untreated mandibular dentition of non-growing patients.

• 대한치과의사협회지
• /
• 제57권6호
• /
• pp.333-343
• /
• 2019

Many orthodontists face difficulties in aligning incisors in an esthetically critical position, because the individual perception of beauty fluctuates with time and trend. Temporary anchorage device (TAD) can aid in attaining this critical incisor position, which determines an attractive smile, the amount of incisor display, and lip contour. Borderline cases can be treated without extraction and the capricious minds of patients can be satisfied with regard to the incisor position through whole dentition distalization using TAD. Mild to moderate bimaxillary protrusion cases can be treated with TAD-driven en masse retraction without premolar extraction. Patients with Angle's Class III malocclusion can be the biggest beneficiaries because both sufficient maxillary incisal display, through intrusion of mandibular incisors, and distalization of the mandibular dentition are successfully achieved. In addition, TAD can be used to correct various other malocclusions, such as canting of the occlusal plane and dental/alveolus asymmetry.

• 대한치과교정학회지
• /
• 제23권1호
• /
• pp.101-113
• /
• 1993

For the purpose of interpretation of positional changes of craniofacial structures in Class III malocclusion between mixed and permanent dentition, 73 normal samples and 103 Class III samples of mixed dentition and 125 normal samples and 168 Class III samples of permanent dentition were selected. Comparative cephalometric analysis was undertaken between them respectively by mesh diagram method to evaluate the positional changes of maxilla and mandible in anteroposterior direction and vertical direction and also the inclination changes of maxillary and mandibular incisors in labio-lingual direction. The following results were obtained : 1. The antero-posterior positional changes of the maxilla and mandible were posterior direction of maxilla and anterior direction of mandible. 2. The vertical positional changes of the maxilla and mandible were superior direction of both maxilla and mandible. 3. The labio-lingual inclination changes of the maxillary and mandibular incisors were lingual direction of both maxillary and mandibular incisors.

• 대한치과교정학회지
• /
• 제26권1호
• /
• pp.33-41
• /
• 1996

소구치 발치 직후 일정기간 동안 고정식 장치를 이용한 치료를 의도적으로 연기함으로써 의외의 좋은 결과를 얻었다는 연구결과가 발표되었고 이러한 연구결과를 입증하는 임상경험을 교정의들도 가끔 하게 된다. 소구치 발치 후 하악치열의 생리적 치아이동현상을 연구한 논문에 의하면 이를 생리적 치아이동(driftodontics)이라 명명하였다. Driftodontics의 개념이 교정학 영역에서 조심스럽게 소개되고 있는 이유는 driftodontics의 성질과 이동되는 양에 대해서는 아직 조사가 미흡한 실정이며 이러한 치아이동을 이용하기 위한 지침서가 거의 소개되어있지 않기 때문이다. 따라서 본 연구의 대상은 제 I급 부정교합자 중 이전에 교정치료를 받은 경험이 없고, 상, 하악 치열궁에 crowding이 있어 상, 하악 제1소구치를 발치하기로 한 57명 (남자 16명, 여자 41명)을 대상으로 하였다. 연령에 따라 두 군으로 나누어 제1군은 26명으로, 평균연령은 13.5세(12.7-14.9세)였으며 제2군은 31명의 환자로 평균연령 21.3(18-22.1)세였다. 두 군 모두에서 소구치 발치 후 약7개월 정도의 driftodontics기간을 유지한 후 측모 두부방사선사진 및 석고모형 계측을 통하여 얻어진 결과는 다음과 같다. 1. 2군(18세-22세)에서는 주로 하악 전치 및 견치의 후방이동이 일어났으며 하악구치는 상대적으로 이동이 미약한 정도로 나타났다. 2. 1군(12세-15세)에서는 전치부 변화 비율이 2군에 비해 더욱 많이 일어났으며, 구치변화는 2군과 유사한 것으로 나타났지만 그 양은 조금 컸다. 3. 하악 전치부의 생리적 이동으로 불규칙지수(irregularity index)가 감소하고 crowding양이 감소하였다.

• 대한치과교정학회지
• /
• 제46권3호
• /
• pp.171-179
• /
• 2016

Objective: The primary aim of the study was to generate new prediction equations for the estimation of maxillary and mandibular canine and premolar widths based on mandibular incisors and first permanent molar widths. Methods: A total of 2,340 calculations (768 based on the sum of mandibular incisor and first permanent molar widths, and 1,572 based on the maxillary and mandibular canine and premolar widths) were performed, and a digital stereomicroscope was used to derive the the digital models and measurements. Mesiodistal widths of maxillary and mandibular teeth were measured via scanned digital models. Results: There was a strong positive correlation between the estimation of maxillary (r = 0.85994, $r^2=0.7395$) and mandibular (r = 0.8708, $r^2=0.7582$) canine and premolar widths. The intraclass correlation coefficients were statistically significant, and the coefficients were in the strong correlation range, with an average of 0.9. Linear regression analysis was used to establish prediction equations. Prediction equations were developed to estimate maxillary arches based on $Y=15.746+0.602{\times}sum$ of mandibular incisors and mandibular first permanent molar widths (sum of mandibular incisors [SMI] + molars), $Y=18.224+0.540{\times}(SMI+molars)$, and $Y=16.186+0.586{\times}(SMI+molars)$ for both genders, and to estimate mandibular arches the parameters used were $Y=16.391+0.564{\times}(SMI+molars)$, $Y=14.444+0.609{\times}(SMI+molars)$, and $Y=19.915+0.481{\times}(SMI+molars)$. Conclusions: These formulas will be helpful for orthodontic diagnosis and clinical treatment planning during the mixed dentition stage.

• 대한소아치과학회지
• /
• 제51권1호
• /
• pp.55-65
• /
• 2024

This study aimed to assess the accuracy of tooth widths, intermolar widths, and arch lengths acquired through two intraoral scanners, including iTero Element Plus Series (Align Technology, Santa Clara, CA, USA) and Trios 4 (3Shape, Copenhagen, Denmark), specifically on mixed dentition. A total of 30 subjects were divided into 2 groups, each undergoing both alginate impressions and intraoral scanning using either the iTero or Trios scanner. The plaster models were measured with a caliper, while the digital models were measured virtually. In the iTero group, all tooth width measurements exhibited differences compared to the plaster values, except for maxillary left lateral incisors (p = 0.179), mandibular right (p = 0.285), and left (p = 0.073) central incisors. The Trios group did not display significant differences in any of the tooth width measurements. Intermolar width comparisons for both groups indicated differences, except for mandibular primary canine to primary canine values (p = 0.426) in the iTero group. Regarding arch length, the mandibular anterior, maxillary right, and left arch lengths in the iTero group demonstrated larger caliper values than those of iTero. Conversely, in the Trios group, all parameters showed smaller caliper values, especially in upper anterior, maxillary right, mandibular right, and mandibular left arch lengths with significance (p = 0.027, 0.007, 0.003, and 0.047, respectively). Despite the differences between the two groups, digital models might be clinically suitable alternatives for plaster models. Pediatric dentists should carefully assess these differences, as a comprehensive evaluation would result in precise orthodontic treatment planning and favorable outcomes for young patients with mixed dentition.

• 대한치과교정학회지
• /
• 제13권1호
• /
• pp.73-82
• /
• 1983

The author studied on the dental arch widths and lengths and height of palates at 3 groups of dentition: mixed dentition, early permanent dentition, young adult, having normal occlusion and dentition. The models of the 336 maxillary and mandibular case, made from alginate-base hydrocolloid impressions were measured and analyzed statistically. The result as follows; 1. The upper intercanine width increased between the mixed dentition group and early permanent dentition group but there was no change in the young adult group in both sexes. The lower intercanine width increased between the mixed dentition group and early permanent dention group in the male. 2. The upper and lower 1st bimolar width increased slightly with age in the male but there was no change in the female. 3, The sex difference found in this study was one of absolute size, the female being slightly smaller than the male in the early permanent dentition group and young adult. 4. The arch length had no notable sexual differences and decreased between the mixed dentition group and early permanent dentition group. There was no change in the arch length in the young adult. 5. The height of palate increased gradually with age.

• 대한치과교정학회지
• /
• 제41권4호
• /
• pp.297-306
• /
• 2011

경미한 III급 부정교합의 비발치 치료는 하악 치열의 원심이동과 상악 치열의 근심이동을 통하여 절충 치료를 하게 된다. 지금까지 하악 구치의 원심경사 및 후방이동을 시키기 위해서 다양한 치료 방법이 소개되어 왔다. 골성 고정원을 이용한 치료는 총생이 심한 경우와 같이 하악치열의 후방이동이 요구될 때 적용되는데 환자의 협조도와 무관하게 사용할 수 있지만, 하악 치열의 후방 이동 시 치근 접촉가능성이 있으며 골성 고정원의 탈락 가능성을 배제할 수 없다. Multiloop edgewise arch wire (MEAW)와 악간 고무줄을 이용한 치료는 효율적으로 하악 치아를 원심 경사할 수 있지만, 장치의 복잡성 때문에 제작이 어렵고 환자의 불편감이 증가하는 단점을 가지고 있다. 최근에 향상된 초탄성 Ni-Ti alloy wire는 교정력을 좀 더 효과적으로 전달할 수 있고, improved superelastic wire (ISW)를 이용한 tip-back은 디자인이 간단하기 때문에 간단한 조작으로 와이어를 제작할 수 있으며, 환자의 불편감이 감소할 수 있다. 본고에서는 향상된 초탄성 Ni-Ti alloy wire와 악간 고무줄을 이용하여 하악 구치부를 원심 경사이동한 증례를 소개하고, 효과적인 임상 적용을 위한 고려사항을 살펴보고자 한다.