• The korean journal of orthodontics
• /
• v.22 no.3 s.38
• /
• pp.627-646
• /
• 1992

The purpose of this study was to investigate the relationship among the activity of the craniofacial muscle and craniofacial form and occlusal state. In this study, subjects were consisted of 23 male adults with skeletal Class III malocclusion and 30 male adults with normal occlusion. The measurements in oral exam, lateral ceghalogram, and E.M.G. recordings of anterior temporal, masseter, and upper lip muscles at rest position, clenching in centric occlusion, chewing of gum, swallowing of juice, were analyzed with SPSS system. The results were as follows: 1. At rest position upper lip muscle activity of skeletal Class III group was significantly higher than that of normal group. 2. Both clenching and chewing masseter and temporal muscle activity of normal group were significantly higher than that of skeletal Class III group. 3. During swallowing of juice, upper lip muscle activity of skeletal Class III group were significantly higher than that of normal group. 4. The activities of masseter and anterior temporal muscle during clenching and chewing were significantly correlated with hypodivergent facial form and number of occluded teeth. 5. The activity of upper lip during swallowing had positive correlation with mandibular prognathism.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.46 no.3
• /
• pp.162-173
• /
• 2020

Dental implants are the first option for replacement of missing teeth. Failure usually involves additional cost and procedures. As a result, the physician should limit the risk factors associated with implant failures. Implant site is one of many factors that can influence the success or failure of dental implants. The association between early implant failure (EIF) and implant site has yet to be documented. This review aims to estimate the impact of insertion site on the percentage of EIFs. An electronic and manual search of studies that reported early failure of dental implants based on collection site. A total of 21 studies were included in the review and examined for the association between EIF and alveolar site. Subgroup analysis, including a comparison between implants inserted in four alveolar ridge regions of both jaws was performed. The early failure rate was higher for maxillary implants (3.14%) compared to mandibular implants (1.96%). Applying a random effect, risk ratio (RR), and confidence interval (CI) of 95% revealed higher failure in the maxilla compared to the mandible (RR 1.41; 95% CI [1.19, 1.67]; P<0.0001; I²=58%). The anterior maxilla is more critical for early implant loss than other alveolar bone sites. Implants in the anterior mandible exhibited the best success rate compared of the sites.

• The korean journal of orthodontics
• /
• v.27 no.3 s.62
• /
• pp.445-456
• /
• 1997

This study was designed to examine the dental asymmetry in person with facial asymmetry and to examine the relationship between the degree of mandibular deviation and asymmetry of maxillary dental arch. The sample!, were divided to asymmetry group and normal group. The asymmetry group consisted of 21 subjects(6 males and 15 females) and their mean age was 23.5 years. The normal group consisted of 20 subjects(10 males and 10 females) and their mean age was 18.6 years. Anteroposterior, transverse position of all maxillary teeth except 3rd molars, vortical position of maxillary 1st molars, and angulation of central incisors were measured. The anterioposterior and transverse positions of teeth were measured on the maxillary dental casts, the vertical position of maxillary 1st molars and angulation of maxillary incisors were measured on posteroanterior cephalometric radiographs. The data were analyzed to examine whether significant asymmetries existed in each of the asymmetry and normal groups. The results of this study were as follows : 1. In the asymmetry group, the correlation between the degree of mandibular deviation and that of 3-dimensional dental asymmetry was not so high. 2. In the asymmetry group, the teeth in deviated side were more laterally positioned than that of undeviated side. There were differences in the anteroposterior position of maxillary 1st and 2nd molars and the angulation of maxillary central incisors. 3. In the asymmetry group, the transverse asymmetry was larger in the posterior teeth rather than in the anterior teeth and larger than the anteroposterior asymmetry.

• Restorative Dentistry and Endodontics
• /
• v.44 no.4
• /
• pp.39.1-39.8
• /
• 2019

The present report presents a case of dens invaginatus (DI) in a patient with 4 maxillary incisors. A 24-year-old female complained of swelling of the maxillary left anterior region and discoloration of the maxillary left anterior tooth. The maxillary left lateral incisor (tooth #22) showed pulp necrosis and a chronic apical abscess, and a periapical X-ray demonstrated DI on bilateral maxillary central and lateral incisors. All teeth responded to a vitality test, except tooth #22. The anatomic form of tooth #22 was similar to that of tooth #12, and both teeth had lingual pits. In addition, panoramic and periapical X-rays demonstrated root canal calcification, such as pulp stones, in the maxillary canines, first and second premolars, and the mandibular incisors, canines, and first premolars bilaterally. The patient underwent root canal treatment of tooth #22 and non-vital tooth bleaching. After a temporary filling material was removed, the invaginated mass was removed using ultrasonic tips under an operating microscope. The working length was established, and the root canal was enlarged up to #50 apical size and obturated with gutta-percha and AH 26 sealer using the continuous wave of condensation technique. Finally, non-vital bleaching was performed, and the access cavity was filled with composite resin.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.19 no.3
• /
• pp.247-256
• /
• 2003

The patient had bruxism and epilepsy tendency. Inadequate or unstable posterior support was identified due to severe anterior attrition and decreased occlusal vertical dimension. Prematurities of posterior occlusal and wear facets increased the function of anterior teeth, resulting in severe wear. Wear facets displayed sharply defined peripheries, which are matched on articulated diagnostic casts. Also the patient showed C III malocclusion tendency, and lost some facial contour with drooping corners on the mouth. In this case, the alteration of OVD (Occlusal Vertical Dimention) may provide a biologically compatible adjunct to the treatment such as dentofacial esthetics, improved visual proportion in facial heightand mechanical solutions to the force-management of the masticatory system. The patient requires extensive restorative treatment to regain appropriate function, esthetics and comfort. According to the report by Farhad Fays, the average vertical distance from the maxillary to the mandibular mucolabial reflection in the region of the central incisors is approximately 34mm. However, the vertical distance of this patient was found to be 32mm, which was necessary to add gauge 20-sheets to apply vertical dimension. A removable occlusal overlay splint, which restores OVD to the estimated optimalposition, is the general first trial. The patient was observed periodically for 6 weeks, while appropriate adjustments were made vertical dimension to function. When patient felt comfortable with the splint, the teeth were prepared, and provisional restorations are placed for 3 months. The provisional restoration was fabricated by a diagnostic wax-up. When the patient felt comfortable with the provisional restoration, the final restoration mimics OVD, function, and esthetics that have been developed in the treatment restorations. Restoration of the extremely worn dentition presents a substantial challenge to thedentists. Therefore, careful evaluation of the etiology, history, and factors associated with occlusal vertical dimension should be preceded prior to the appropriate treatment planning.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.3 no.1
• /
• pp.19-28
• /
• 1973

The author has studied maxillo-facial anatomical landmarks using Status X with two methods. The one has performed by application of contrast media on the human dry skull, the other has performed on living human skull as control group. Comparing the panagraphs taken by two methods, the author has drawn following results: 1. The panagraphs revealed the undistorted, highly sharp panoramic shadows of each jaw on a film. 2. Diminishing the inserted anode tube overlapping-free representation of the anterior teeth was taken. 3. Alternating the head position of the objects, direction of anode tube and film placing, the shadows of temporo-mandibular joint and zygomatic arch were taken without overlapping the other bone tissues. 4. In the panagraphs applied various shaped contrast media to each anatomical landmark, a radio-anatomical atlas which is necessary to interpret various bone tissues was taken. 5. In order to interpret panagraphic shadows easily, the author has tried this study by comparing the films of the living human skull with the films of the human dry skull applied contrast media.

• The korean journal of orthodontics
• /
• v.23 no.4 s.43
• /
• pp.485-492
• /
• 1993

Multiloop Edgewise Archwire(MEAW) is effective in relief the Curve of Spee in mandibular arch but up Sl down orthodontic elastics must be used with it. The purpose of this study was to analyse the effect of orthodontic elastics, like as up & down elastics, Class II elastics, and Class III elastics, and the effect of L loop in Multioop Edgewise Archwire. 1. Intrusive force of MEAW in anterior teeth was reduced and uprighting force in premolars was increased by up & down elastics. 2. Uprighting force was significintly increased with Class III elastics in multiple L loop arch wire. 3. The force of Class II elastics made molars tip mesially and Curve of Spee deep.

• Journal of Technologic Dentistry
• /
• v.41 no.2
• /
• pp.149-156
• /
• 2019

Purpose: Prosthodontics for edentulous patients is a treatment technique using implant, which has impactful results in retention and support effects. Methods: As a retention technique, SCRP (screw and cement retained implant prosthesis) has reported in many studies as a beneficial method for both patients and curers, which can reduce errors in process of making abutment and top implant. Results: Prosthesis manufacturing, as polymerization method of hardened resin teeth with thermoplastic resin, is helpful for patients with aesthetic and financial situations regarding residual ridge and interocclusal relationship, also indicates reliable results in both retention and care. Conclusion: Using SCRP technique, we notably obtained a clinical and aesthetic outcome from five implants in anterior tooth, which are half fixable and detachable implants on screw of implant abutment by the technicians at anytime.

• Journal of Oral Medicine and Pain
• /
• v.24 no.1
• /
• pp.81-94
• /
• 1999

This study intends to find usefulness of the computer assisted dental identification in mass disaster. The variety of dental characteristics was investigated through the research of dental records of 508 adults. And a computer assisted simulation program was used to evaluate the selectivity of dental identification. Findings were as follows : 1. Combinations of dental characteristics were found 155 types. The most various dental characteristic was showed on the mandibular first molar. 99.0% of subjects had dental characteristics for dental identification. 2. The posterior teeth, in comparison with anterior teeth, showed higher selectivity in dental identification which was enhanced by information on the material, type and cavity of the restoration. 3. The variety of dental characteristics was mainly found on the combinations of missing tooth with the material, type and cavity of the restoration. 4. The computer assisted dental identification program, with informa- tion about one's tooth state, made individual identification possible when there was only a part of the teeth in a corpse. 5. The computer assisted dental identification had considerably high selectivity based on the variety of dental characteristics. And it was also performed faster and preciser than the existing identification methods. Based on the results of this study, there are various combinations of the feature of the tooth itself with dental characteristics caused by a certain type of treatment on the teeth. And using the computer assisted dental identification program based on this, dental identification can be more efficient economically and more useful than any other forensic identification methods.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.4
• /
• pp.630-635
• /
• 1999

Transposition has been described as an interchange of position of permanent tooth and is a relatively rare dental anomaly. Transposition of teeth may occur both in the maxillary and mandibular arches. but it appears more often in the maxilla of individual teeth, the maxillary canine is the most often involved. A canine transposes most often with a first premolar and less frequently transposes with a lateral incisor. Incomplete transposition is a condition describing an interchange in the position of the crowns of two permanent teeth, while the root apices remain in their relative position. Complete transposition is a situation in which both the crowns and entire root structure are transposed. The etiologic factors of transposition are tooth buds interchange, retained deciduous canines, migration of the erupting canine, trauma to deciduous teeth etc. This report describes a case of a transposition between a maxillary left canine and a lateral incisor and impaction of a maxillary left central incisor due to trauma to deciduous dentition.