• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.3
• /
• pp.300-305
• /
• 2008

Purpose: The purpose of our study was to evaluate the volume of pre- and post operative masseter muscle and bite force in mandibular prognathic patients treated with SSRO with the use of the 3D CT imaging technique and occlusal force meter. Materials and methods: The study group consisted of 12 patients with mandibular prognathism (5 males and 7 females) who underwent mandibular setback surgery (BSSRO) in the Department of Oral and Maxillofacial Surgery, Samsung medical center. Bite force was measured at pre op, post op 3, 6 and 12 months by occlusal force meter(GM10, Nagano Keiki, Japan) The preoperative CT examination of subjects was performed between one month prior to operation and one year after to operation. And muscle volume was measured. Result: As compared to preoperative measurements at 1 year postoperatively the masseter & internal pterygoid muscle volume were diminished (p<0.05) The bite force steadily recovered, so at postoperatively 6 months reached the preoperative level. And at 1 year after operation, the maximum bite force was significantly greater than preoperative levels. No significant correlation was presented between masseter muscle and bite force (p>0.05), internal pterygoid muscle and bite force (p>0.05). Conclusion: In this study, the results showed that volume and bite force of the masticatory muscles decreased significantly immediate after orthognathic surgery for mandibular set-back. However, reduction of maximum bite force disappears within 6 months after surgery.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.28 no.3
• /
• pp.196-204
• /
• 2002

For the study of its stability when the screw has been fixed after sagittal split ramus osteotomy(SSRO) of the mandible, the methods of screw arrangement are classified into two types, triangular and straight. The angles of screws to the bone surface are classified as perpendicular arrangements, the $60^{\circ}$ anterioinferior screw, known as triangular, and the most posterior screw, called straight arrangement, thus there are four types. The finite element method model has been made by using a three dimensional calculator and a supercomputer. The load directions are to the anterior teeth, premolar region, and molar region, and the bite force is 1 Kgf to each region. The distribution of stress, the von-Mises yield strength, and safety of margin refer to the total sum of transformed energy have been studied by comparison with each other. The following conclusion has been researched : 1. When shear stress is compared, in the triangular arrangement in the form of "ㄱ", the anterosuperior screw is seen at contributing to the support of the bone fragment. In the straight arrangement, substantial stress is seen to be concentrated on the most posterior angled screw. 2. When the von-Mises yield strength is compared, it seemed that the stress concentration on the angled anteroinferior screw is higher, it shows a higher possibility of fracture than any other screw. In the straight arrangement, stress appeared to be concentrated on the most posteriorly angled screw. 3. When the safety margins of the transfomed energy are compared, the energy conduction is much greater in the case of the angled screw than in the case of the perpendicular screw. The triangular arrangement in the form of "ㄱ" shows a superior clinical sign to that of the straight arrangement. Judging from the above results, when the screw fixation is made after SSRO in practical clinical cases, two screws should be inserted in the superior border of mandibular ramus and a third screw of mandibular inferior border should be inserted in the form of triangular. All screws on the bony surface should be placed perpendicularly-$90^{\circ}$ angles apparently best promote bony support and stability.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.2
• /
• pp.132-140
• /
• 2010

Purpose: The aim of this study is to identify the usefulness of unilateral mandibular angle ostectomy, so-called "Lateral Angle Reduction", in asymmetric prognathism patients by the assessment of postoperative stability and esthetic results Patients and methods: For the retrospective study, 10 skeletal class III mandibular asymmetry patients who were performed SSRO and unilateral mandibular angle ostectomy, Lateral Angle Reduction, was selected. Lateral and posterioanterior cephalogram was taken before surgery (T0), 1day after surgery (T1) and 6month after surgery (T2). To know the esthetic results the facial width and lateral facial contour were examined on posterioanterior cephalogram and to know the postoperative stability B point and Incisor inferius was examined on lateral cephalogram. Statistical analysis was performed. Results: From T0 to T1, Intergonial width was significantly decreased, dominantly at shortened side but no significant changes at lengthened side. Those were well-maintained during 6 months. Lateral facial angle and Ramus angle was significantly decreased on only shortened side from T0 to T1. As a result, after surgery, there were no significant differences in all measurements between shortened side and lengthened side. Ramus deviation angle in shortened side and ramus angle in lengthened side which reflect the angulation of ramus on frontal plane didn't show significant changes after surgery and during postsurgical periods. Lower dental midline showed no statistical changes during postsurgical period. The relapse rate on B-point was 11.92%. Conclusion: Unilateral "Lateral angle reduction" in the asymmetric mandible is valuable to obtain the narrow lower face and symmetric facial contour with a good stability.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.37
• /
• pp.38.1-38.6
• /
• 2015

Background: The posterior movement of mandible was known as the main cause of the changes in the pharyngeal airway space (PAS) and the postoperative obstructive sleep apnea (OSA). The purpose of this study was to know the changes of PAS and position of hyoid bone. Methods: Lateral cephalographies of 13 patients who had undergone sagittal split ramus osteotomy (SSRO) setback surgery were taken preoperatively (T1), postoperatively within 2 months (T2), and follow-up after 6 months or more (T3). On the basis of F-H plane, diameters of nasopharynx, oropharynx, and hypopharynx were measured. The movements of the soft palate, tongue, and hyoid bone were also measured. Results: The amount of mandible setback was $7.5{\pm}3.8mm$. In the measurements of PAS, there was a statistically significant decrease of $2.8{\pm}2.5mm$ in nasopharynx (P < 0.01), and $1.7{\pm}2.4mm$ in oropharynx (P < 0.01) were observed after surgery. The hypopharynx decreased $1.0{\pm}2.1mm$ after surgery and continuously decreased $1.0{\pm}2.8mm$ at follow-up. The changes in hyoid bone position showed the posterior movement only after surgery and posteroinferior movement at follow-up. Conclusions: The PAS such as nasopharynx, oropharynx, and hypopharynx showed relatively high correlation with the amount of mandibular setback. The change of resistance in upper airway may be important for the prevention of OSA after mandibular setback surgery.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.3
• /
• pp.258-265
• /
• 2001

A prognathic mandible and prominent gonial angle are considered to be unattractive in the Orient because it gives the face a square and muscular appearance. Requests for contouring of the mandibular angle are rare in the other race but are much more common in Korea and, through out the Orient. So, we often encounter a patient with a prognathic mandible and squarish or broad face who wishes to have his or her facial size reduced minimally or to acquire a round or slender appearance. But, mandibular angle is located in the deepest part of the operative field and the strong tension of the lateral soft tissue makes retraction difficult. It is extremely difficult to reduce the gonial angle with sagittal split ramus osteotomy by intraoral approach at the same time. We apply the method of gonial angle reduction during SSRO and had satisfactory results. We will present our results and hope to give some useful information for management of mandibular deformity.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.19 no.2
• /
• pp.117-129
• /
• 1997

Recently, combined with social complexity, increment of medical demand and supply and the change of esthetic category, admission and operation of the patients of facial deformity have been changed with annual change. This study was conducted in the concept of helping the overall character of orthognathic surgery in future understood and being an important index in the establishment of better treatment course, through the patient, on whom was operated orthognathic surgery via sagittal split ramal osteotomy in our Dept. of Oral & Maxillofacial Surgery, Chonbuk National University Hospital from 1991. 1. 1 to 1995. 12. 31. The results were obtained as follows. 1. The ratio of male to female was 1 : 1.33 and the ages between 16 and 25 year was 73.6%, and the mean age was 20.4 years. 2. The ratio of setback amount between 6 to 15mm was 84.6% and the advancement amount between 1 to 10mm was 89% and the mean amount of movement was 9.0mm in setback, and 3.6mm in advancement. 3. After removal of maxillomandibular fixation(MMF), the distinction of sex was not statistically significant in ROM. 4. The ROM following methods of fixation was statistically significant in 3rd(P<0.05), 8th, and 12th week(each P<0.01), with faster rehabilitation in rigid fixation which had shorter MMF period. 5. The rehabilitation of ROM following the operation methods was statistically significant in 1st(P<0.05), 2nd, 3rd, 4th, 6th, 8th, and 12th week(each P<0.01) with faster rehabilitation in the case of SSRO than Lefort I / SSRO (Two jaw surgery). 6. The rehabilitation of ROM following directions of mandibular movement did not manifest a statistically significant difference in both setback and advancement.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.29 no.3
• /
• pp.217-226
• /
• 2007

Purpose: Distraction osteogenesis is considered to take favorable effect on the TMJ and be beneficial to prevent the relapse after the mandibular advancement of Class II malocclusion patient. This is the report with literature review on the mandibular advancement in the patients showing preoperative condylar resorption and who need larger amount of advancement. Patients and method: Distraction osteogenesis using intraoral device was performed for three mandibular hypoplasia patients (one male and two females). All patients were adult over 18 years old. The patients showed condylar bony resorption preoperatively. The distraction was performed intraorally with modified SSRO. After 7 days of latency period, activation was performed at the rate of 1.0 mm/day with twice turn. The devices were removed after 4-8 month consolidation period. Results: Total advancement of mandible was average 13 mm. One patient showed openbite immediately after removal of distraction device. It took long time to guide the openbite with elastics. The comparison between cephalometries immediately after device removal and postoperative six month revealed average 3.4 mm relapse. This means that mandibular advancement with distraction osteogenesis needs overcorrection and elastic rehabilitation even after enough consolidation periods. Conclusion: Larger amount of mandibular advancement could be achieved with distraction osteogenesis in severe mandibular hypoplasia with condylar resorption. However, some relapse was found during the follow-up period and the over correction is considered to be needed. The effect of distraction osteogenesis seems to be investigated with long-term follow-up.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.28 no.1
• /
• pp.73-79
• /
• 2006

The management of mandibular prognathism and retrognathism was revoluted by the advent of the technique of bilateral sagittal split ramus osteotomy(BSSRO) as described by Obwegeser and Trauner in 1957. The BSSRO of the mandible has been used for nearly 50 years and has undergone numerous modifications and improvements. Most patients, treated by this surgical operation, express their satisfaction with improved facial esthetics, masticatory function and others. But several complications associated with BSSRO may appear. Especially among them, facial nerve palsy following BSSRO is rare but serious problem. We treated for facial nerve palsy following BSSRO by physical therapy, steroid therapy and surgical intervention and then the result was favorable. Therefore we would like to report a case about a patient with facial nerve palsy after BSSRO with a review of the literatures.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.40 no.4
• /
• pp.169-172
• /
• 2014

Objectives: The purpose of this retrospective study was to compare the amount of postoperative drainage via closed suction drainage system after intraoral vertical ramus osteotomy (IVRO) and sagittal split ramus osteotomy (SSRO). Materials and Methods: We planned a retrospective cohort study of 40 patients selected from a larger group who underwent orthognathic surgery from 2007 to 2013. Mean age (range) was 23.95 (16 to 35) years. Patients who underwent bilateral IVRO or SSRO were categorized into group I or group II, respectively, and each group consisted of 20 patients. Closed suction drainage system was inserted in mandibular osteotomy sites to decrease swelling and dead space, and records of drainage amount were collected. The data were compared and analyzed with independent t-test. Results: The closed suction drainage system was removed at 32 hours postoperatively, and the amount of drainage was recorded every 8 hours. In group I, the mean amount of drainage was 79.42 mL in total, with 31.20 mL, 19.90 mL, 13.90 mL, 9.47 mL, and 4.95 mL measured at 0, 8, 16, 24, and 32 hours postoperatively, respectively. In group II, the mean total amount of drainage was 90.11 mL, with 30.25 mL, 25.75 mL, 19.70 mL, 8.50 mL, and 5.91 mL measured at 0, 8, 16, 24, and 32 hours postoperatively, respectively. Total amount of drainage from group I was less than group II, but there was no statistically significant difference between the two groups (P=0.338). There was a significant difference in drainage between group I and group II only at 16 hours postoperatively (P=0.029). Conclusion: IVRO and SSRO have different osteotomy design and different extent of medullary exposure; however, our results reveal that there is no remarkable difference in postoperative drainage of blood and exudate.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.40
• /
• pp.4.1-4.4
• /
• 2018

Background: Along with the advances in technology of three-dimensional (3D) printer, it became a possible to make more precise patient-specific 3D model in the various fields including oral and maxillofacial surgery. When creating 3D models of the mandible and maxilla, it is easier to make a single unit with a fused temporomandibular joint, though this results in poor operability of the model. However, while models created with a separate mandible and maxilla have operability, it can be difficult to fully restore the position of the condylar after simulation. The purpose of this study is to introduce and asses the novel condylar repositioning method in 3D model preoperational simulation. Methods: Our novel condylar repositioning method is simple to apply two irregularities in 3D models. Three oral surgeons measured and evaluated one linear distance and two angles in 3D models. Results: This study included two patients who underwent sagittal split ramus osteotomy (SSRO) and two benign tumor patients who underwent segmental mandibulectomy and immediate reconstruction. For each SSRO case, the mandibular condyles were designed to be convex and the glenoid cavities were designed to be concave. For the benign tumor cases, the margins on the resection side, including the joint portions, were designed to be convex, and the resection margin was designed to be concave. The distance from the mandibular ramus to the tip of the maxillary canine, the angle created by joining the inferior edge of the orbit to the tip of the maxillary canine and the ramus, the angle created by the lines from the base of the mentum to the endpoint of the condyle, and the angle between the most lateral point of the condyle and the most medial point of the condyle were measured before and after simulations. Near-complete matches were observed for all items measured before and after model simulations of surgery in all jaw deformity and reconstruction cases. Conclusions: We demonstrated that 3D models manufactured using our method can be applied to simulations and fully restore the position of the condyle without the need for special devices.