• Journal of Biomedical Engineering Research
• /
• v.44 no.1
• /
• pp.19-24
• /
• 2023

Due to the spread of COVID-19, many patients with severe respiratory diseases have occurred worldwide, and accordingly, the use of mechanical ventilators has exploded. However, hospitals do not have systematic risk management, and the Medical Device Regulation also provides medical device risk management standards for manufacturers, but does not apply to devices in use. In this paper, we applied the Failure Mode Effects Analysis (FMEA) risk analysis technique based on the International Standard ISO 14971 (Medical Devices-Application of risk management to medical devices) for 85 mechanical ventilators of a specific model in use in hospitals. Failure modes and effects of each parts were investigated, and risk priority was derived through multiplication of each score by preparing criteria for severity, occurrence, and detection for each failure mode. As a result, it was confirmed that the microprocessor-based Patient Unit/Monitoring board in charge of monitoring scored the highest score with 36 points, and that reliability management is possible through systematic risk management according to priority.

• Proceedings of the Safety Management and Science Conference
• /
• 2001.05a
• /
• pp.67-75
• /
• 2001

Circuitry to be connected to a Telecommunication Network consists of SELV CIRCUITS or TNV CIRCUITS. So International Standards, like as ITU-T Recommendation K.11, UL 1950, CSA C22.2 950 have been taken to reduce the risk that the Overvoltages from the power lines and from electrictraction lines, that may be received from the telecommunication network. Legal requirements may exist regarding permission to connect equipment having PTC components to a telecommunication network. Surge suppressors that bridge the insulation shall have a minimum d.c. sparkover voltage of 1.6 times the rated voltage or 1.6 times the upper voltage of the tared voltage range of the equipment. If left in place during electric strength testing of insulation, they shall not be damaged. In this work, The Conception ＆ Fail-Mode Analysis of PTC components for Over-Current Protection is proposed. It guarantees the protection for PL Claim about this Subject.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2012.05a
• /
• pp.89-92
• /
• 2012

Wireless Mesh Network expanded the capability of the conventional wireless networking by allowing the nodes to operate in proactive mode, reactive mode or the combination of both, the hybrid mode in the multi-hopping nature. By doing so, the links between the nodes become much more robust and reliable because of the number of paths to reach a destination node from a source node can be more than 1 and do not need to rely on the access point (AP) alone to relay the messages. As there may be many possible ways to form an end-to-end link between 2 nodes, the routing security becomes another main concern of the 802.11s protocol. Besides its reliance on the 802.11i for the security measures, 802.11s also includes some new features such as the Mesh Temporal Key (MTK) and the Simultaneous Authentication of Equals (SAE). The authentication and key management (AKM) process of 802.11s were observed in this paper.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.528-533
• /
• 2004

The purpose of this thesis is to construct the autonomous decentralized train traffic management structure using techniques of Autonomous Decentralized System. Currently, a method of train traffic control is making use of CTC(Centralized Traffic Control). Its operation method is divided into the remote mode and the local mode. The classified basis is according to the control authority of install signals in track side. In most cases, a large scale station is operated by the local mode. Because of dispatchers in center can not control the shunting works influence on the main route. In order to solve these problem s, we analyzed a current operation condition and system requirements. Moreover, this thesis is constructing autonomous decentralized train traffic management structure. Finally, this research proposed that interface with CTC and step-by-step construction.

• Current Optics and Photonics
• /
• v.2 no.5
• /
• pp.413-421
• /
• 2018

We propose a novel methodology based on the multiplication function to improve the signal-to-noise ratio (SNR) for vibration detection in a phi optical time-domain reflectometer system (phi-OTDR). The extreme-mean complementary empirical mode decomposition (ECEMD) is designed to break down the original signal into a set of inherent mode functions (IMFs). The multiplication function in terms of selected IMFs is used to determine a vibration's position. By this method, the SNR of a phi-OTDR system is enhanced by several orders of magnitude. Simulations and experiments applying the method to real data prove the validity of the proposed approach.

• Current Optics and Photonics
• /
• v.7 no.4
• /
• pp.443-448
• /
• 2023

The ±1-order Kelly sidebands with dispersion-dependent spacing of mode-locking fiber lasers are investigated for frequency-tunable terahertz signal generation. The principle of dispersion dependence of Kelly sidebands is analyzed. A new method, which is a dispersion-management mechanism introduced into the fiber-laser cavity, is proposed to generate Kelly sidebands with widely tunable wavelength spacing. A spacing tuning range of up to 28.46 nm of the ±1-order Kelly sidebands is obtained in simulation. Using the data of the optical spectrum with dispersion-dependent Kelly sidebands, the frequency spectrum of generated terahertz signals is calculated. Consequently, the signal frequency can be changed from 0.09 to 2.27 THz.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.633-635
• /
• 2018

The compensation characteristics of the distorted WDM channels compensated for by dispersion management (DM) and optical phase conjugation in the long-haul (50 fiber spans ${\times}$ 80 km) transmission link with the randomly distributed single mode fiber (SMF) length and residual dispersion per spans (RDPS) are investigated as a function of the arrangement of SMF and dispersion compensating fiber (DCF) and the control position of net residual dispersion (NRD).

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.5
• /
• pp.331-337
• /
• 2004

Target motion analysis with a sonar system in general uses a regular sampling time and thus obtains regular target information regardless of the target maneuver status. This often results in overconsumption of the limited sonar resources. We propose two methods of the IMM(interacting Multiple Model) PDAF algorithm for sonar resource management to improve target motion analysis performance and to save sonar resources in this paper. In the first method, two different process noise covariance which are used as mode sets are combined based on probability. In the second method, resource time which are processed from two mode sets is calculated based on probability and then considered as update time at next step. Performance of the proposed algorithms are compared with the other algorithms by a series of Monte Carlo simulation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.784-786
• /
• 2010

Implementation possibility of inline dispersion management (DM) using bi-end schemes, which consist of one single mode fiber (SMF) and two dispersion compensating fiber (DCF) placed at front and rear of SMF, respectively, is investigated for compensating total dispersion accumulated in a span of WDM transmission links. It is confirmed that if net residual dispersion (NRD) is decided to be ${\pm}10\;ps/nm$ then bi-end scheme is effective to compensate for WDM channels with wide launching power range.

• Journal of Korean Society for Quality Management
• /
• v.45 no.4
• /
• pp.665-676
• /
• 2017

Purpose: The purpose of this paper proposes an effective and systematic methods of risk management in product development project. Methods: This paper first discusses what risk factors be considered during product development period and then presented a model for preventive risk management. For that, this paper proposes how to evaluate the risk factors and risk events, and how to select prevention action for managing risk factors effectively. For this process, this paper uses well-known quality tools such as House of Quality (HOQ) and Failure Mode and Effects Criticality Analysis (FMECA) methods. Results: There is an inherent need for the development of robust risk management framework in order for product development projects to be successful. The identification and quantification of risk factors, risk events, and prevention actions can have significant effects on the success of a product development projects. Project managers can implement the proposed model to improve project success. Conclusion: The findings showed that this method would be effective for project managements in dealing with risk management issues in product development projects. This method presented would be an one of good guidelines for practitioners in the industry.