• Polymer(Korea)
• /
• v.25 no.2
• /
• pp.226-232
• /
• 2001

The properties of poly(ethylene terephthalate) (PET)/maleic anhydride-grafted polypropylene (MAgPP)/poly(styrene-co-maleic anhydride)(PScMA) ternary blend were investigated. The ternary blend was immiscible based on the glass transition temperatures measured by dynamic mechanical analyzer (DMA). The degradation of MAgPP during melt mixing for 30 min at 280$^{\circ}C$ did not affect the properties of the ternary blend. The interaction among the components was confirmed from the rheological properties, which was increased with the PSCMA contents. In terms of the mechanical properties, it was observed to satisfy the mixture rule for a multiple system.

• Journal of the Korean Society of Industry Convergence
• /
• v.13 no.2
• /
• pp.93-98
• /
• 2010

Polypropylene / montmorillonite / wood flour nanocomposites are melt-mixed by using a twin screw extruder. The montmorillonite is intercalated by the wood flour and the basal spacing of montmorillonite is increased with increasing the content of wood flour. The exfoliation constantly occurs by adding more than 10 wt.% of maleic anhydride-grafted polypropylene as the compatibilizer, which is used for improving the interfacial adhesion between matrix and filler. Also, the maleic anhydride-grafted polypropylene enhances the mechanical properties of the nanocomposites.

• Carbon letters
• /
• v.20
• /
• pp.39-46
• /
• 2016

In this work, the effects of maleic anhydride (MA) content on mechanical properties of chopped carbon fibers (CFs)-reinforced MA-grafted-polypropylene (MAPP) matrix composites. A direct oxyfluorination on CF surfaces was applied to increase the interfacial strength between the CFs and MAPP matrix. The mechanical properties of the CFs/MAPP composites are likely to be different in terms of MA content. Surface characteristics were observed by scanning electron microscope, Fourier transform infrared spectroscopy, and single fiber contact angle method. The mechanical properties of the composites were also measured by a critical stress intensity factor (K_IC). From the K_IC test results, the K_IC values were increased to a maximum value of 3.4 MPa with the 0.1 % of MA in the PP, and then decreased with higher MA content.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2A
• /
• pp.137-143
• /
• 2011

This study evaluated the effects of maleic anhydride grafted polypropylene powder (mPP) contents on the bond properties of cement mortar and nonpolar macro synthetic fibers (macro synthetic fiber). Dog-bone bond tests were performed to evaluate the bond performance of macro synthetic fiber in cement mortar with varying amounts of mPP (0%, 5%, 10%, 15%, 20%, 25%, 30% of cement weight). The bond properties (pullout behavior, pullout load and interface toughness) of macro synthetic fiber in cement mortar increased as the mPP contents was increased. The bond properties increased with the mPP contents. The microstructure of macro synthetic fiber surface was examined after the pullout test to analyze the frictional resistant force according to mPP contents during the pullout process of macro synthetic fiber in cement mortar. The scratched of macro synthetic fiber increased with the mPP contents.

• Elastomers and Composites
• /
• v.47 no.2
• /
• pp.162-167
• /
• 2012

Surface modification of macromolecules renders a progressive and favorable method to enhance the properties of polymeric materials and improves conductivity, wettability, stability, adhesion, antibacterial properties, etc. of polymeric surfaces without deterioration of the polymer bulk properties. Polyolefins such as polyethylene and polypropylene were grafted with maleic anhydride(MAH) as a functional monomer in solution. Evidence for grafting was shown with FTIR measurement. The grafting ratio was determined from chemical titration. The higher MAH loading, the lower contact angle(${\theta}$) was obtained. With the increasing content of MAH, melting temperature($T_m$) of maleic anhydride grafted polymer decreased while decomposition temperature($T_d$) of maleic anhydride grafted polymer increased.

• Advances in materials Research
• /
• v.3 no.3
• /
• pp.129-137
• /
• 2014

Biocomposites from polypropylene (PP) and corn cob (CC) were investigated. The effect of corn cob content and maleic anhydride polypropylene (MAPP) as compatibilizer were studied. Results showed that addition of corn cob (CC) in PP have decreased the tensile strength and elongation at break, whereas modulus of elasticity of biocomposites increased. The biocomposites with the MAPP as compatibilizer exhibited higher tensile strength and modulus of elasticity compared biocomposites without MAPP. The morphology study of biocomposites indicates that enhanced the interfacial interaction and adhesion between filler and matrix with the presence of MAPP.

• Polymer(Korea)
• /
• v.33 no.4
• /
• pp.358-363
• /
• 2009

Maleic anhydride-grafted polypropylene has been widely used to improve the interfacial interaction between the components in PP/polar polymer blends and PP/filler composites and to maximize the physical properties and thermal properties. In this paper. the maleic anhydride (MAH)-grafted polypropylene (co-PP) was fabricated through reactive extrusion process with di-cumyl peroxide (DCP) as an initiator. The grafting degree of MAH depending on the contents of DCP and MAH was investigated by FT-IR spectra and chemical titration. The grafting degree increased with increasing MAH concentration and also showed maximum value at 0.06 wt% of DCP concentration. Melt flow index (MFI) of the grafted copolymer was increased with increasing the contents of MAH. The DSC and TGA analysis data indicate the melting temperature and thermal degradation of PP depending on the grafting degree of MAH.

• Tunnel and Underground Space
• /
• v.14 no.4
• /
• pp.241-247
• /
• 2004

In this study, new polypropylene fiber was developed for shotcrete and concrete reinforcement, by treating the surface of the polypropylene by maleic anhydride grafted polypropylene(mPP). Dispersiveness of the fiber was tested. Mechanical properties of fiber reinforced shotcrete was tested.

• International Journal of Automotive Technology
• /
• v.6 no.6
• /
• pp.665-670
• /
• 2005

Nanocomposites of polypropylene with organically modified clays were compounded on a twin-screw extruder by two-step melt compounding of three components, i.e., polypropylene, maleic anhydride grafted polypropylene (PP-g-MA), and organically modified clay. The effect of PP-g-MA compatibilizers, including PH-200, Epolene-43, Polybond-3002, Polybond-3200, with a wide range of maleic anhydride (MA) content and molecular weight was examined. Morphologies of nanocomposites and their mechanical properties such as stiffness, strength, and impact resistance were investigated. X-ray diffraction patterns showed that the dispersion morphology of clay particles seemed to be determined in the first compounding step and the further dispersion of clays didn't occur in the second compounding step. As the ratio of PP-g-MA to clay increased, the clay particles were dispersed more uniformly in the matrix resin. As the dispersibility of clays was enhanced, the reinforcement effect of the clays increased, however impact resistance decreased.

• Elastomers and Composites
• /
• v.57 no.2
• /
• pp.40-47
• /
• 2022

The effects of maleic-anhydride-grafted polypropylene (PP-g-MAH) and montmorillonite (MMT) on the wear resistance of polypropylene (PP) were investigated. The surface of MMT was modified with 3-aminopropyltriethoxysilane, and the interfacial interaction between PP and MMT was improved using PP-g-MAH. Fourier-transform infrared spectroscopy was used to confirm that silane was grafted on the surface of MMT. The Taber abrasion test and scanning electron microscopy were used to determine the wear resistance and observe the surface morphology of PP, respectively, after wear testing. Energy-dispersive X-ray spectroscopy was used to compare the effects of PP-g-MAH and silane modification of MMT on the dispersion of MMT. The results indicated that silane was successfully grafted onto the surface of MMT. Moreover, the wear resistance of PP was improved by the addition of MMT. The wear resistance of PP composites comprising silane-modified MMT and PP-g-MAH was higher than those of other PP composites. This was attributed to silane improving the interfacial interaction between MMT and PP.