• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.10a
• /
• pp.140-153
• /
• 2005

During the tunnel construction the major failure mode can be categorized as: tunnel failure just after the tunnel excavation without support, failure after application of shotcrete and finally failure after setting the concrete lining. The failure mode just after the tunnel excavation without support, can be further classified as : bench failure, crown failure, face failure, full face failure, failure due to weak strata and failure due to overburden. Moreover the failure after application of shotcrete is classified as heading face failure, settlement of shotcrete support, local failure of shotcrete lining and invert shotcrete. To find out the major causes of tunnel collapse, the investigation was done in case of the second phase of Seoul subway construction. The investigation results depicted that the major causes of tunnel collapse were due to the weak layer of rock/fault and sudden influx of ground water from the tunnel crown. While the investigation results of the mountain road tunnels construction have shown that the major causes of tunnel failure were inadequate analysis of tunnel face mapping results, intersection of faults and limestone cavities. In this paper some recent measurement in order to mitigate such tunnel collapse are presented

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.6
• /
• pp.641-651
• /
• 2015

With its recent tourism boom, Vanuatu, a small country in the South Pacific, is experiencing an increasing demand for construction. However, it has been struggling with persistent schedule delays in their construction projects due to a variety of reasons. In an attempt to respond to this situation, this paper aims to identify the major causes of schedule delays in building construction in Pacific island countries, with a focus on Vanuatu. To collect data on the factors affecting schedule delays, face-to-face interviews were conducted. Based on these, seven major causes of schedule delays, as selected by the majority of the participants, were identified and discussed to provide perceptive insights for future improvement opportunities. This paper attempts to help contractors with limited resources better understand the major causes of schedule delay in Vanuatu and achieve better performance in building projects.

• Journal of the Korean Home Economics Association
• /
• v.45 no.10
• /
• pp.45-57
• /
• 2007

The causes of indebted overspending were investigated by examining household expenditure patterns using the data from the 2002 Family Expenditure Survey. The five major expenditure categories were identified by factor analysis, and the six types of indebted overspending were clustered. About 28% of the indebted overspending was done out of necessity, and food, utilities, housing, and health care accounted for about 42% of the household expenditure. Luxury spending accounted for about 25% of the overspending by indebted households who spent about 24% of the household expenditure on clothing, entertainment, and private education. Cars (22%) and education (20%) were found to be other major causes of indebted overspending. Paying off debt and durable purchases were identified as the major causes of indebted overspending, but had a low frequency. Finally, the financial status of the four major types of indebted overspending households was evaluated.

• Journal of East-West Nursing Research
• /
• v.17 no.2
• /
• pp.125-131
• /
• 2011

Purpose: In an attempt to investigate causes of runaway impulse in male and female students with runaway impulse experience in high schools, this study was carried out. Methods: The subjects were 195 high school students in Gyeonggi and Incheon area. The data were collected by using the questionnaires. Results: To both male and female students, the main causes of runaway impulse were 'conflicts with parents', 'interference and excessive expectations of parents' and 'burden of study and grades'. In cases of youth with runaway experience by runaway impulse, the major causes of runaway impulse were 'want to have fun with friends' and 'conflicts with parents'. Also shelter and economic difficulties were obstacles that prevent a runaway despite runaway impulse to both male and female students. But in female, the fear and anxiety about runaway were higher barriers than those of male. Conclusion: From the above results, major causes of runaway impulses were relationships with parents, and burden of study. And barriers to prevent a runaway were shelter, economic difficulties to both male and female students.

• Korea journal of population studies
• /
• v.6 no.1
• /
• pp.43-69
• /
• 1983

This study was conducted to make the life tables from specific causes of death in Korea. Both "Life tables of Korea in l978-79" and "the statistics on causes of death statistics in 1980" issued by Economic Planning Board were used as source of data for this study. Among the 58, 187 death certificates reported to the concerned authorities, 39, 801 causes were drawn for the purpose of this study. As a result, it is revealed that two thirds of men in Korea died from these 10 major causes of death. The summarized results are as follows: 1. According to recent statistics, 10 major causes of death in 1980 were shown in the order of 1) malignant neoplasms, 2) cerebrovascular disease, 3) accidents and adverse effects, 4)hypertensive disease, 5) ischaemic heart disease and heart attack, 6) chronic liver disease and cirrhosis, 7) tuberculosis, 8) pneumonia, bronchitis, emphysema and asthma, 9) suicide, 10) diabetes mellitis. 2. The major causes of death in Korea were very similar to those of developed countries such as West Germany, Denmark and Japan. This means that our pattern of death causes is almost approaching to that of developed countries. 3. Our crude death rate in 1980 was on the line of 6.6 per 1, 000 people. This is very low level, compared with 12.1 in West Germany and 10.0 in Denmark, however, our age sepcific death rate was on the verge of doubled level in each age category as to that of West Germany, Denmark and Japan. The fact tells us that our death rate is very high yet, especially in young and prime adult age, and the proportion of the aged is quite low. 4. Average ages of people died from malignant neoplasms, cerebro vascular diseases and hypertensive diseases were 63.1, 66.6, 67.3 respectively, however, that of accidents and adverse effect was only 42.5. This shows that accidents occur indifferently from age. 5. In the curve of eventual death probability, the curve of malignant neoplasms was the highest of all curves before 60 in age. However, the probability curve of eventually dying from accidents and adverse effects tends to decline with age. 6. In this study five life tables from major causes of death (four leading causes of death and of tuberculosis) were constructed for 1979. These life tables are reflecting accurately the effects of age distribution on the specific cause of death. In the surviving curje of these tables we can see that the curve of accidents is adversely related to age. While curves of neoplasms, hypertension and tuberculosis are not diminishing before 40 in age, they are going sharply downward after 50 in age.ard after 50 in age.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.8
• /
• pp.1103-1114
• /
• 2000

The purpose of the study was to investigate the level and the major causes of job stress, and the causes of the high level of job turnover rate of fashion merchandisers and fashion designers. The study also examined the correlations among the major causes of job stress, job results and job turnover rate. A part of the questionnaire consisted of questions on major causes of job stress, job result, and intention and trial to leave a job. The subjects were to rate on 5 point Likert-type scales. The other part included the questions on demographic and individual characteristics of the subjects and their company characteristics. For the survey, the subjects were 99 fashion merchandisers and 128 fashion designers who are employed by mens or womens wear manufacturers. The SAS PC+ package was used to calculate frequency, Cronbach $\alpha$, multiple regressions. The results of the study were as follows: 1. The high degree of the job results were resulted from the high degree of specialties in their job characteristics, high contentment in human relations, career development and income, and low role conflict. 2. Stronger intentions and more trials to leave their job were correlated to better task performance in the workplace, lower commitment to their job, and lower job satisfaction. 3. Higher level of job stress caused by interpersonal relationship in the organization and contentment in career development and income affected stronger intentions and more trials to leave their job.

• Journal of Preventive Medicine and Public Health
• /
• v.47 no.6
• /
• pp.336-342
• /
• 2014

Objectives: Child mortality remains a critical problem even in developed countries due to low fertility. To plan effective interventions, investigation into the trends and causes of child mortality is necessary. Therefore, we analyzed these trends and causes of child deaths over the last 30 years in Korea. Methods: Causes of death data were obtained from a nationwide vital registration managed by the Korean Statistical Information Service. The mortality rate among all children aged between one and four years and the causes of deaths were reviewed. Data from 1983-2012 and 1993-2012 were analyzed separately because the proportion of unspecified causes of death during 1983-1992 varied substantially from that during 1993-2012. Results: The child (1-4 years) mortality rates substantially decreased during the past three decades. The trend analysis revealed that all the five major causes of death (infectious, neoplastic, neurologic, congenital, and external origins) have decreased significantly. However, the sex ratio of child mortality (boys to girls) slightly increased during the last 30 years. External causes of death remain the most frequent origin of child mortality, and the proportion of mortality due to child assault has significantly increased (from 1.02 in 1983 to 1.38 in 2012). Conclusions: In Korea, the major causes and rate of child mortality have changed and the sex ratio of child mortality has slightly increased since the early 1980s. Child mortality, especially due to preventable causes, requires public health intervention.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.38-39
• /
• 2014

In order to reduce fatal accidents, a systematic safety management should be performed at a construction site. A lot of researches on direct causes of fatal accidents and indirect causes which affect the direct causes have been conducted for effective safety management. In the previous studies, these causes are considered separately because of the difficulty of recognition of indirect causes. It is also hard to measure the negative impact of these causes and notice their occurrence the perception of its problem. However, a study on identification of complicated relationship between these two types of causes is necessary since an accident occurs due to the chain reaction that indirect causes trigger the direct causes which lead to the fatal accidents. Therefore, this study proposes a safety management plan that considers indirect and direct causes of fatal accidents cases in the Korean construction industry. Then this paper suggests a plan of safety management by identifying major causes of the accidents.

• Korea journal of population studies
• /
• v.9 no.2
• /
• pp.53-66
• /
• 1986

This study was carried out to determine the mortality level and it's related demographic factors in Korea since 1942. In order to clarify the changes in structure of mortality and the causes of death, the indices such as Crude Death Rate(CDR) or Life Expectancy at Birth were used. The author examined the mortality levels and major causes of death and performed the relevant demographic analysis. The followings are the summary of this study: 1. The CDR declined rapidly till 1960's. Such improvement slowed down from 1960's to mid 1970's and stabilized afterwards. It was due to the change of age composition, namely, the increase of aging population. 2. The Life Expectancy at Birth increased rapidly till mid 1960's. But elongation of the Life Expectancy slowed down after then. Especially in female, it slowed down more. 3. Changing patterns of major causes of death summarize that, till 1960's infectious diseases were major causes of death, but recently non-infectious diseases like chronic degenerative diseases became more prevalent. 4. The elongation of Life Expectancy at Birth till mid 1960's was mainly resulted by $_4{q}_1$. But the major contributing factor of the improvement in Life Expectancy at Birth in female is he reduction of $_$\infty${q}_{50}$ recently. In male, the improvement in Life Expectancy at Birth is due to the reduction of $_1{q}_0$. recently. 5. The age-sex-specific mortality rates revealed that $_n{q}_x$ declined in common throughout the period, even though there exists some variability of their ranges as age changes. Consequently, this study seems to suggest that the demographic transition in Korea occurred between late 1960's and early 1970's. In other words, the rapid change before late 1960's was eased in early 1970's. The slow change in this period caused a stabilizing pattern. Therefore, the population change is expected to be stabilized continuously.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.12
• /
• pp.127-132
• /
• 2004

It is very important to find out causes of strip pinching for the high quality of products and fer the stable operation of rolling system. We have examined the strip pinching from three points of view to find out the causes of strip pinching in rolling system: strip shape, rolling operation conditions, and behavior of strip. Wedge, off center, and difference of rolling force through CMD(Cross machine direction) are found to possibly provide major initial causes of strip pinching. Generally strip pinching occurred in the tail of strip. Thus, computer simulations by using a FEM code were also carried out to find out the initial mechanism of strip pinching depending upon the force and geometric boundary conditions at the time of strip tail rolling. The strong compression force effect due to the sudden release of strip tail from the work roll and non-uniform strip tail shape (ex. Fish tail) across the CMD were found to provide possible major causes of strip pinching.