• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권3호
• /
• pp.1650-1669
• /
• 2017

In this study, each pixel in an ear is used as a centroid to generate a cake. Subsequently the major axis length of this cake is computed and obtained. This obtained major axis length serves as a feature to recognize an ear. Later, the ear hole is used as a centroid and a 16-circle template is generated to extract the major axis lengths of the ear. The 16-circle template extracted signals are used to recognize an ear. In the next step, a ring-to-line mapping technique is used to map these major axis lengths to several straight-line signals. Next, the complex plane vector computing technique is used to determine the similarity of these major axis lengths, whereby a solution to the image-rotating problem is achieved. The aforementioned extracted signals are also compared to the ones that are extracted from its neighboring pixels, whereby solving the image-shifting problem. The algorithm developed in this study can precisely identify an ear image by solving the image rotation and image shifting problems.

• Journal of Biosystems Engineering
• /
• 제15권1호
• /
• pp.23-32
• /
• 1990

Geometrical characteristics of fruit including perimeter, projected area and length of minor and major axis were calculated by computer programs to be used in fruit sorting by image processing system. The results are summerized as follows. 1. A program calculating perimeter, projected area, and length of minor and major axis by edge detection and chain code was developed. 2. Geometrical characteristics of given figures were calculated to verify the program and the discrepancies from the measured values were about 5%. 3. Regression models for estimating volums of apples were developed and regression coefficients for each variety were found. 4. Abnormal apples could be recognized by comparing the ratio of minor axis to major axis and the standard value was proposed.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.320-324
• /
• 2017

아음속 공기유동으로 수직분사하는 액체제트에 대하여 오리피스 형상이 달라질 경우, 분무특성에 어떠한 영향을 미치는지 실험적으로 연구하였다. 서로 다른 오리피스 길이 대 직경비와 타원형 노즐의 종횡비를 갖는 분사기들을 제작하여 수직분사 실험을 진행하였다. 원형노즐과 타원형 노즐에서의 분열길이를 비교하였으며, 타원형 노즐에서의 분열길이는 모든 실험조건에서 원형노즐에 비해 줄어들었다. 캐비테이션과 수력튀김 현상이 분사기 내부에 발달되는 분무차압 조건의 경우, 두 노즐 모두 분열길이가 감소하였다. 액주궤적의 경우, 장축으로부터 분무되는 액체제트가 횡방향 공기유동에 수직으로 부딪혀 나가는 경우가 액주의 궤적이 단축에 비해 더 휘어지며, 침투높이가 낮아진다.

• Journal of Biosystems Engineering
• /
• 제27권6호
• /
• pp.557-564
• /
• 2002

Corrugated board is an efficient low-cost structure material fur the boxes that are widely used for transporting, storing and distributing goods. Corrugated board is also considered as an orthotropic because the principal material directions are the same as in paperboard. The purpose of this study was to elucidate the principal design parameters of ventilating box through the FEA on the various types of ventilating hole. From the viewpoint of the stress distribution and stress level, the optimum pattern and location of the ventilating hole were vertically oblong, and symmetry position with a short distance to the right and left from the center of front and rear panel. And, the optimum location and pattern of hand hole were a short distance to the top from the center of both side panels, and modified shape to increase the radius of curvature of both side in horizontal oblong. In general, the optimum pattern and location of both the ventilating hole and hand hole based on the FEM analysis were well verified by experimental investigation. It is suggested that decrease in compressive strength of the box could be minimized in the same ventilating hole area under the condition of the length of major axis of ventilating hole is less than 1/4 of box length, the ratio of minor axis/major axis is 113.5∼l/2.5, and number of the ventilating holes is even and symmetrical.

• Journal of Welding and Joining
• /
• 제21권4호
• /
• pp.87-91
• /
• 2003

Effects of the circular and non-circular pad shapes on self-alignment in BGA soldering are predicted using Surface Evolver, and the calculated results are compared with experimental data. While the pad shape has minor effects on self-alignment in the vertical direction, self-alignment in the lateral direction depends on the pad direction and length ratio of the non-circular pad. Larger restoring force is obtained in the minor-axis direction than the major-axis direction, which suggests a possibility of reducing misalignment in the specific direction. The restoring force of the circular pad is between those of the non-circular pad in the major and minor-axis directions. The calculated results of Surface Evolver show reasonably good agreements with experimental data using the shear loading system.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.185-190
• /
• 2005

This work presents a numerical procedure to optimize the elliptic-shaped pin fin arrays to enhance turbulent heat transfer. The response surface method is used as an optimization technique with Reynolds-averaged Navier Stokes analysis of flow and heat transfer. Shear stress transport (SST) turbulence model is used as a turbulence closure. Computational results for average heat transfer rate show a reasonable agreement with the experimental data. Four variables including major axis length, minor axis length, pitch and the pin fin length nondimensionalized by duct height are chosen as design variables. The objective function is defined as a linear combination of heat transfer and friction-loss related terms with weighting factor. D-optimal design is used to reduce the data points, and, with only 28 points, reliable response surface is obtained. Optimum shapes of the pin-fin arrays have been obtained in the range from 0.0 to 0.1 of weighting factor.

• 대한기계학회논문집
• /
• 제12권6호
• /
• pp.1327-1334
• /
• 1988

본 연구에서는 회전굽힘응력하에서 비관통노치를 갖는 재료의 피로거동을 분 석하기 위하여 우선 시험편의 반지름에 해당한 심공노치를 갖는 시험편을 준비하고 이 시험편이 고, 중간, 저응력을 받는경우 작용응력의 대소에 의한 표면 및 내부크랙전파 특성과 함께 크랙면형상변화 관계를 검토하였다.

• 한국음향학회지
• /
• 제18권7호
• /
• pp.67-73
• /
• 1999

본 연구에서는 Class Ⅳ Flextensional 트랜스듀서의 구조를 설정하고, 여러 형상 및 물성 변수들이 공진 주파수에 미치는 영향을 유한 요소법을 이용하여 해석하였다. 그 결과 공진 주파수에 영향을 가장 많이 미치는 것은 장축 길이, 단축 길이, 쉘의 두께, 쉘의 물성 등이다. 반면에 Insert의 부피, 세라믹 적층의 물성과 두께는 상대적으로 적은 영향을 미치고, Nodal-plate의 두께는 공진 주파수와 무관한 경향을 나타내었다. 본 연구에서 얻어진 결과는, 다양한 중심 주파수를 가지는 Class Ⅳ Flextensional 트랜스듀서를 구현함에 있어 유용한 자료로 활용될 수 있을 것이다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.226-227
• /
• 2008

We constructed a class I Flextensional transducer, and analyzed the variation of the resonance frequency of the transducer in relation to its design variables. We used the FEM for the analysis. Major axis length, minor axis length, thickness and material properties of the shell have large effects on the resonance frequency. In addition, the validation of the FE model was verified by manufacturing and comparison of the impedance analysis.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.732-735
• /
• 2002

By forming lens-like shapes on the electrode surfaces in OLEDs, the external quantum efficiency is enhanced. The external quantum efficiency of the proposed structure can be much more increased compared to that of the flat structure by decreasing the length of major axis and increasing the length of minor axis for the lens-like shapes.