• Journal of the Korea Institute of Building Construction
• /
• v.12 no.4
• /
• pp.415-425
• /
• 2012

Green Frame was developed to embody a Green structural system that can provide long life, resource reduction, and availability of remodeling in apartment buildings. Composite precast concrete column and beam, the major structural material of Green Frame, can be installed precisely and promptly through connection of steels and concrete. The connection of Green Frame can be divided into four types, based on the method and characteristics of connection. To select an appropriate type for the site, a comparative analysis of the four types is necessary. The objective of this study is to compare the duration, cost, quality, and safety of four types. The findings of this study can be applied during the selection that appropriate composite precast concrete column reflected project characteristics in design phase.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.3
• /
• pp.113-120
• /
• 2010

Ultra-High Strength Concrete (UHSC) demands a clear presentation of its mechanical properties, as distinct from normal strength concrete, and an evaluation of the serviceability of high-rise buildings that use ultra-high strength concrete. Ultra-high strength concrete fck=150MPa was manufactured with pre-mix cement, and an experimental study was conducted to evaluate the mixing properties and compressive strength, with the major variables being unit cement contents, water-binder ratio, and type of pre-mix cement. The test result showed that 150MPa concrete requires about 6~7 minutes of mixing time until each of the materials (ordinary Portland cement, silica fume, blast-furnace slag powder and anhydrite) are sufficiently revitalized. The slump flow of fresh concrete was shown to be about 700~800mm with the proper viscosity. The average value of concrete compressive strength was shown to be about 70% in 7 days, 85% in 14 days, and 95% in 28 days, for 56 days of concrete material age.

• Journal of Korean Society of Rural Planning
• /
• v.6 no.2 s.12
• /
• pp.82-93
• /
• 2000

The concept of sustainable development in rural area, which is focused on both preservation of nature and human's amenity, has been common paradigm. The purpose of this study is to suggest the development directions for the environmentally friendly rural house. The planning items for developing sustainable rural house were selected through literature survey, case study, and their adaptation evaluation. The establishment of principles and the evaluation of planning items were analyzed by a survey to experts. The results are as follows : 1) It is showed that sustainability evaluation of rural village is rated as above the moderate degree, but rural house is rated as 3.4(average score). Especially, there were lowly evaluated the utility, material, structure and inner environment in rural house. 2) It is revealed that 76.7% of planning items are located in both the upper left and upper right hand quadrant of the action grid, which is drawn by the importance-performance analysis(IPA). And any item is not found in the lower right hand quadrant(Possible Overkill). 3) Two basic principles and eight optional principles we identified by analysis of factor and regression. The rural zone is identified as major effective element for applying planning items into the rural house development. So it is desirable to apply the items differently by the rural zone type. 4) In view of sustainable development, it is desirable for rural village to have about 50 houses, and for rural house to have $155{\sim}180$ pyung(坪) as lot size, 30% as ratio of building, and 60% as building volume.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.63 no.3
• /
• pp.97-105
• /
• 2021

Most of the rural development projects for the welfare of residents are mainly new construction and remodeling projects for community buildings such as village halls and senior citizens. However, in the case of the construction industry, it has been studied that 23% of the total carbon dioxide emissions generated in Korea are generated in the building-related sector. (GGIC, 2015) In order to reduce the emission of environmental pollutants resulting from construction of rural community buildings, there is a need to establish a system for rural buildings by predicting the environmental impact. As a result of this study, the emissions of air pollutants from buildings in rural communities were analyzed by dividing into seven stages: material production, construction, operation, maintenance, demolition, recycling, and transportation activities related to disposal. As a result, 12 kg of carbon dioxide (CO), 0.06 kg of carbon monoxide (CO), 0.02 kg of methane (CH), 0.04 kg of nitrogen oxides (NO), 0.02 kg of sulfurous acid gas (SO), and non-methane volatile organics per 1m of buildings in rural communities It was analyzed that 0.02 kg of compound (NMVOC) and 0.00011 kg of nitrous oxide (NO) were released. This study proved that environmentally friendly design is possible with a quantitative methodology for the comparison of operating energy and air pollutant emissions through the design specification change based on the statement of the rural community building. It is considered that it can function as basic data for further research by collecting major structural changes and materials of rural community buildings.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.1
• /
• pp.115-123
• /
• 2022

Statistics on the occurrence of fires in residential facilities over the past 10 years, show that approximately 40% are fires in apartment buildings. To prevent the spread of fire and support evacuation in apartment housing, the fire resistance performance and performance design of fire doors are becoming more important. This study established a database using 395 quality inspection reports from 2016 to 2020, which passed the fire performance test, and derived the fire door performance-influencing factors through an analysis of the structure (12 elements) of the fire door. As a result, the effect of core material, adhesive, hinge type, blowing agent, etc. was confirmed in 287 pass cases. On the other hand, it was confirmed that the occurrence of flames and crevices in the 108 cases of failure were the major failure factors in the fire door fire resistance test. Fire doors are composed of composite materials to prevent failure of fire resistance performance, and efficient design and quality control are required through standardization of components.

• Journal of architectural history
• /
• v.23 no.4
• /
• pp.7-17
• /
• 2014

This paper aims at researching the cave concept of the Japanese architect Terunobu Fujimori and the result could be summarised as follows. First, a cave is Fujimori's only theme related to the interior space. He set some design guidelines for practice concerning openings of the wall and finishing materials of the interior, following the two major characteristics of a cave: 'comfortability' and 'homogeneity in material'. And 'fire' was also the premise in the cave as a 'spirit' of the space. Second, Fujimori applied the concrete guidelines to Tanpopo House (1994~95), which had in fact borne the ideas. Yakisugi House (2005~07) that took the cave as its design theme showed the transition of his cave concept, from closedness to openness. Third, though his cave concept might deserve the criticism that it is inclined to 'image' rather than 'essence', it illustrates that he seeks after an archetype of human dwelling before the purity of the original space was tarnished with rationality and abstraction. And the cave idea allows the seemingly contradictory 'sachlich' and 'surrealistic' features to coexist. Summing up, Fujimori's cave concept proves that his architecture is a rejection of the Cartesian modernist ideal and the contemporary architects' desire for dematerialisation. In a fundamental level, however, it is a result of his strategic choice induced by his own primary principle that his building must not be similar to any styles in history or any other architects' works in the world.

• Structural Engineering and Mechanics
• /
• v.48 no.4
• /
• pp.467-477
• /
• 2013

Municipalities in the United Arab Emirates approve reinforced concrete design of building structures to follow either the ACI 318 or the BS 8110 code. Since the requirements of these codes are different from each, there is a need to compare the structural demand in the two codes. The main objective of this study is to compare the design requirements of the ACI 318 code with the BS 8110 code for the flexural, shear and axial compression limit states. The load factors and load combinations in the two codes are also compared. To do so, a large number of cross-sections with different geometries, material properties, and reinforcement ratios are analyzed following the procedures in the two codes. The relevant factored load combinations in the two codes are also investigated for a wide range of live-to-dead load ratios and for various wind-to-dead load ratios. The study showed that the differences between the design capacities in the ACI 318 and BS 8110 codes are minor for flexure, moderate for axial compression, and major for shear. Furthermore, the factored load combinations for dead load, live load and wind in the two codes yield minor-to-moderate differences, depending on the live-to-dead load ratio and intensity of wind.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.5
• /
• pp.482-489
• /
• 2004

The purpose of this study is to reevaluate the performance of Hanji as a architectural material. Recent studies report that one of the causes of the Sick-HouseㆍSick-Building Syndrome is due to the contaminants from interior materials and the lack of ventilation. In this study, the properties of Hanji are investigated. The major focuses of this research are (1) how efficient the Hanji is for ventilation of the house and (2) whether the usage of Hanji brings required ventilation volume to the house. According to the test results, differential pressure in the air and the amount of ventilation showed linear relationship. Test results differ from various kinds of Hanji. Since houses usually have double window system, Hanji can be used to the windows system, especially for inner part of double window system. It is suggested that the combination of Hanji windows for the inner part and glass windows for outer part is very effective, and offers a solution to improvement of indoor air quality and the lack of ventilation with passive ventilation that has less energy consumption.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.12 no.1
• /
• pp.81-88
• /
• 2012

According to the survey results of the Ministry of Land, Transport and Maritime Affairs in the end of December 2011, the residential buildings was reported as 67.3% of 4,529,464 buildings. Reflected in the national energy policy, the residential building is expected that greater energy savings. To have realized the Passive House Project used the Autoclaved Lightweight Concrete(ALC) material on exterior wall, we take advantage of a very large energy savings. Therefore, this study investigate the patent documents of three major companies, SUMITOMO, CLION, ASAHI KASEI, in Japan. and analyze technical flow and benchmarking patent. As a result, the Sliding method or the Rocking method of ALC panels how to install is to be superior to high-performance drift and safety by a earthquake. And the embedded anchor in panel needs to improve the shape and the strength of bearing. Thus installation technology of the ALC exterior wall investigated in japanese patent documents is expected to the fastening units and anchors.

• Journal of the Korea Society of Computer and Information
• /
• v.8 no.4
• /
• pp.176-185
• /
• 2003

The SCM is on the effective treatment solution that has process schedule, material supplying, inventory management for perfect product these days. The SCM is innovative process activity to attain effective whole. It depends on the structure of approach because supplying network is consist of organization, budgeting, responsibility and authority. The major objective of the thesis was to propose the integration model and structure method technique of the SCM. Thus, to implement strategy model, firstly, it is determined repairs and non-effectiveness of supplying network. secondly, to set up future vision and goal, it is considered success factor of supplying net. thirdly, no gaps introduce between present and future of supplying net fourthly as above-mentioned consequence, Alternative is to set up integration and implementing model according to enterprise administration strategy .