• Journal of Advanced Marine Engineering and Technology
• /
• 제23권6호
• /
• pp.785-793
• /
• 1999

There are two kinds of method in ship maintenance. One is the corrective maintenance and the other is the preventive maintenance. For these maintenances recently the stochastic techniques are widely used to keep the maximum availibility and the optimal maintenance period minimizing a given cost function. Thus this paper suggest a method to decide the optimal policy of ship's maintenances by using dynamic programming and the effectiveness of the method is verified through several examples in which failure rates and maintenance data of ship's machineries and parts are given.

• 산업공학
• /
• 제21권3호
• /
• pp.254-261
• /
• 2008

Connected-(r,s)-out of-(m,n) : F system is an important topic in redundancy design of the complex system reliability and it's maintenance policy. Previous studies applied Monte Carlo simulation and genetic, simulated annealing algorithms to tackle the difficulty of maintenance policy problem. These algorithms suggested most suitable maintenance cycle to optimize maintenance pattern of connected-(r,s)-out of-(m,n) : F system. However, genetic algorithm is required long execution time relatively and simulated annealing has improved computational time but rather poor solutions. In this paper, we propose the ant colony optimization approach for connected-(r,s)-out of-(m,n) : F system that determines maintenance cycle and minimum unit cost. Computational results prove that ant colony optimization algorithm is superior to genetic algorithm, simulated annealing and tabu search in both execution time and quality of solution.

• 한국컴퓨터정보학회논문지
• /
• 제20권12호
• /
• pp.175-180
• /
• 2015

It is important to maintain information system (IS) following the business and institutional change. Even if successfully developed information systems, we cannot gain the benefit from the systems without the proactive maintenance activities. However, the importance of IS maintenance has not been considered as much as the system development, and we don't have any specific performance management structure. The objective of this study is to identify the relationship between IS maintenance activities and utilization. For empirical test of the hypothesis model, the sample data is collected from public information system sites. Results from multiple regression analysis reveal that proactive maintenance activities including IS maintenance cost increase, improving functionality, and enhancing ease of use have a causal effect on the IS utilization.

• 한국철도학회논문집
• /
• 제7권3호
• /
• pp.245-250
• /
• 2004

The safety of staff, customers and of general Public in general viewed as one of the most important requirements in the urban transit. The maintenance computerization system for car of urban transit is a part of standardization and development of urban transit system, and We have been performed the establishment of maintenance computerization system from 2001 to 2005. The RAMS (reliability, availability, maintainability and safety) estimation for maintenance computerization system are utilized in a variety of computerization system for user's convenience and safety in maintenance. Ever since its inception though, the urban transit has searched for ways to improve reliability, availability, maintainability and safety of the railway subsystem. Provision of a reliable maintenance system include RAMS of the vehicles plays a very important role in achieving a safe system.

• Journal of Information Technology Applications and Management
• /
• 제29권6호
• /
• pp.63-80
• /
• 2022

In this paper, we study structural changes and performance gains in condition-based maintenance process redesign when mobile IoT technology is embedded into urban railway rolling stock. We first develop condition-based maintenance To-Be process model in accordance with the IoT deployment scheme. Secondly, we draw upon theoretical framework of redesign process analysis to develop performance evaluation method suitable to predictive maintenance shift from As-Is ordinary maintenance practice. Subsequently, To-Be process performance evaluations are conducted adopting both the quantitative and qualitative method for time, cost, and dependability dimensions. The results ascertain the considerable benefits captured through detection abnormality prior to actual rolling stock failure occurrence, and details of performance improvements and enhancement of standardization level is revealed. The procedures and results presented in this paper offers useful insights in the fields of IoT economic analysis, condition based maintenance, and business process redesign.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.63-70
• /
• 2000

Light Rail is highlighted for its construction cost and operation ＆ maintenance cost in Korea. However, lack of analysis on driverless operation effect causes many disputes. In this paper, using latest driverless operation cost data. analysed cost reduction effect of it, with comparing present KNR's metropolitan subway signal system. It showed there is enough economic appropriateness B/C 1.241 on interest rate 6%, 1.076 on 8% and 0.943 on 10%, though it couldn't include passenger travel time value.

• 한국산학기술학회논문지
• /
• 제21권10호
• /
• pp.248-258
• /
• 2020

본 연구에서는 해외 선진국의 유지관리 체계를 벤치마킹하여 시설물의 생애주기 차원에서 종합적 자산 관리개념을 고려한 유지관리 기술 분류체계를 제안하였다. 이를 위하여 비교사례 연구 기법을 적용하였으며, 국내·외 유지관리 제도, 정의, 기술 분류체계 등을 비교·분석하였다. 비교사례 분석을 위하여 유지관리 비용 집행 비율이 높은 미국, 영국, 일본을 대상 국가로 선정하였고, 해당 국가들의 유지관리 체계를 분석하였다. 다음으로, 국내 유지관리 관련 법에 내포되어있는 인프라 유지관리 기술의 분류 및 정의에 대하여 분석하였다. 그 결과 해외 선진국들은 유지관리 기술의 효과에 따라 유지보수와 개선을 명확하게 분류하고, 예방적 유지관리 활동 중심의 체계를 구성하고 있었다. 반면, 우리나라의 시설물 유지관리 기술은 그 분류 및 정의가 명확하게 구분되지 않고 아직도 사후 대응적 구조 중심으로 이루어져 있어 개선이 필요한 것으로 나타났다. 비교사례연구 결과를 토대로 제안한 분류체계는 유지관리, 유지보수, 성능개선의 개념을 정립하고, 예방적 유지보수와 대응적 유지보수를 명확하게 구분하였다. 결과적으로 제안된 기술 분류체계는 자산관리관점에서 선제적 유지관리 활동과 합리적인 유지관리 예산 분배를 위한 기초연구로서의 활용도가 높을 것으로 기대된다.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권7호
• /
• pp.407-413
• /
• 2003

Before expanding of distribution automation application to distribution network, we must examine whether there are economical effect. Investment expense for distribution automation can be divided into facility investment expense, maintenance expense, communication expense, investment expense etc. Effect of distribution automation can classify by effect that can convert into money and effect that can not convert into money. Representative effect is outage time decrease effect, distribution line loss decrease effect, main transformer upload effect, distribution line upload effect, work environment improvement effect of lineman and so on. This paper studied economical effect and break-even Point for investment expense by using data that acquire in KEPCO's distribution network.

• 응용통계연구
• /
• 제23권3호
• /
• pp.573-584
• /
• 2010

This paper considers the differences in the software execution environments in the testing phase and the operational phase to determine the optimal release time and warranty period of software systems. We formulate equations for the total expected software cost until the end of the software life cycle based on the NHPP. In addition, we derive the optimal release time that minimizes the total expected software cost for an imperfect debugging software reliability model. Finally, we analyze the sensitivity of the optimal testing and maintenance design related to variation of the cost model parameters based on the fault data observed in the actual testing process, and discuss the quantitative properties of the proposed model.

• KEPCO Journal on Electric Power and Energy
• /
• 제3권2호
• /
• pp.119-125
• /
• 2017

Regarding the implementation of ROMM project (Rehabilitation, Operation, Maintenance & Management), which is one of overseas development projects, it is very important to diagnose the exact current status of aged thermal power plant. However, when people visit the power plant for the purpose of prediagnosis to implement the ROMM project, most target power plants for diagnosis, in general, are under operation. This can be a big interference factor to diagnose the exact current status of power plants. Therefore, in order to solve such interference factor, based on the 30 years of know-how in the field, the present study has developed a regression curve for a simple life time assessment and the calculation of rehabilitation cost that may be used as a reference relatively for the quantitative diagnosis on the status of a relevant power plant even during the operation of the power plant.