• Journal of the Korea Society of Computer and Information
• /
• v.8 no.2
• /
• pp.64-74
• /
• 2003

The unstructured system requires different system designs and realizations according to the environmental factors of the situation, as well as frequent system changes and revisions. Being realized off-line in most of the cases, such a system is in a great demand for maintenance and repair and very difficult to execute the central intensive management. In such a case, the unstructured system is usually fit into a single standardized framework, which makes it impossible to present the accurate picture of the real world and to properly reflect the features of the system. In an attempt to solve these problems, a new concept of system development theory was suggested; it is called the autonomous system, which enables each module to be designed autonomously and allows easy maintenance and repair An example of system realization on the web using the development methodology of this autonomous system was Presented.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.5
• /
• pp.60-67
• /
• 2014

Wind power is one of the fastest growing renewable energy sources. The blades length and tower height of wind turbine have been growing steadily in the last 10 years in order to increase the output amount of wind power energy. The amount of wind turbine energy is increased by increasing the capacity of wind turbine, but the costs of preventive, corrective and replacement maintenance are also increased accordingly. Recently, Condition Monitoring System that can repair the fault diagnose and repair of wind turbine in the real-time. However, these system have a problem that cannot predict and diagnose of the fault. In this paper, wind turbine predict methodology is proposed by using the SVM method. In the case study, correlation analysis between wind turbine fault and external environmental factors is performed by using the SVM method.

• Journal of the Korean Institute of Rural Architecture
• /
• v.13 no.1
• /
• pp.37-44
• /
• 2011

The maintenance works for brick-structured buildings are a new field in Korea, and practical cases are yet inadequate so that such works may cause adverse effects of damaging the buildings after all. Therefore, this study has extracted a preservation technology believed to be most desirable in minimizing the damage to the original state of the buildings and preserving the value as the cultural assets through maintenance work details from 1986 to 2010 regarding brick-structured buildings designated as cultural properties. Firstly, a brick replacement method of using the brick used at the time of construction is efficient in replacement and repair of brick material for preserving value of cultural assets and minimizing damage of the original form. Secondly, use of lime mortar through material analysis is effective in repair of masonry joint and mortar but it is not used often due to high experimental cost. Finally, reinforcement of structure using a form for a building with severe damage is most efficient when considering additional problems. However, damage on the original form of a building can be minimized and value of a building can be preserved only when consideration on sufficient case analysis, materials to be used, and conditions of a building is supported.

• KIEAE Journal
• /
• v.11 no.6
• /
• pp.13-18
• /
• 2011

Building is different from the general commodities and needs to maintain the function and performance to get the living condition. Building deterioration occurs naturally with time elapse. Deterioration reasons are various. These are physical, functional, social and second physical aspect. Building would inevitably be deteriorated and need to repair various building part and materials. It gets to arrive at repair or rebuilding time until any management activity is meaningless. It is important to decide the rebuilding time in a management cost. In this paper, it aimed at analyzing the management annual cost and provide a rebuilding time of a apartment housing with a deterioration curve model. Results of this study are as follows : Most of the building has started to deteriorate in 40 years when the performance of building downgrades to 20%. After it past about 40 years, the deterioration rate is faster than the earlier 40 years. Fourth, the rebuilding time of an apartment housing is recommended about 45 years if the building service life has 60 years.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.3
• /
• pp.135-141
• /
• 2012

This study was conducted to evaluate the characteristics of exposure to asbestos for ship repair workers in Korea by a systematic review. The number of articles studying asbestos exposure levels from ship repair workplaces was found to be 4. All asbestos concentration reported as either geometric mean and geometric standard deviation or ranges were transformed to arithmetic mean to estimate exposure level. In addition, weighted arithmetic means(WAMs) were calculated by weighing of the different number of samples. The WAM concentrations were 2.746 f/cc during asbestos dismantling work, 0.034 f/cc before asbestos dismantling work and 0.065 f/cc after working respectively. The maximum airborne concentration of asbestos during asbestos removal work was 7.02 f/cc which was 70 times higher than the occupational exposure limit of Korea, 0.1 f/cc. This study recommends that retrospective exposure to asbestos based on various ship types and operations should be assessed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.3
• /
• pp.69-75
• /
• 2014

The priority of repair areas are chosen with the probability distribution of 0.3mm wide crack and carbonation induced corrosion. Data is analyzed and evaluated based on the 28 section of Precise Inspection for Safety and Diagnosis (PISD) in seoul. As the crack is distributed in log-normal, the carbonation and cover are in normal distribution. To have rational in repair sections among 503 sheets of underground structure, it is adopted the reliability index as well as the environment factors: strength, sonic speed, $CO_2$ concentration, corrosion, and content of chloride.

• Journal of Aerospace System Engineering
• /
• v.8 no.3
• /
• pp.34-40
• /
• 2014

Since the global economic crisis in year 2008, the world civil helicopter market has been growing recently. According to the market outlook in the next decade, the demand of civil helicopter will be driven by the demand of Private & Corporate, Oil & Gas, Off-shore and EMS(Emergency Medical Service) usages. On the other side, the demand of military market will be driven by the modification and upgrading for life extension or performance enhancement than the new helicopter development for replacing old models. To summarize these situations, the demand of MRO(Maintenance, Repair & Overhaul) market has also been on the rise because of the demand due to above several usages in civil side and the life-extension in military side. Through the MRO market analysis for characteristics, developmental trends and a supply chain, this paper describes that the potential of MRO business is considerably large as a propulsive power of domestic helicopter industry. And also, it proposes the construction direction of MRO network because the domestic industry must make the developmental awareness and reliability a stepping-stone towards own helicopter.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.2
• /
• pp.153-160
• /
• 2010

The widespread deterioration of concrete structures has required the development of new and innovative materials and technologies for strengthening and repair. Recently Fiber reinforced polymer(FRP) composites have received widespread attention as materials for the strengthening and repair of the deteriorated concrete structures. This paper presents the results of Fire-performance of RC beams strengthened with FRP-Aluminum composit hollow beams. Test results show that the higher-damaged FRP strengthened RC beams are more vulnerable to the fire and decrease the effect of FRP strenthening.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.3
• /
• pp.97-107
• /
• 2013

Culverts are structures constructed across river levees. Since river levees are to be constructed continuously, constructions of culvert are known to reduce the stability of river levees. In order to establish an effective inspection system of culverts, a visual inspection system using checklists and smart phone was recommended in this paper. It was determined that the recommended visual inspection checklist is applicable in establishing the investment priority based on the culvert's repair plan establishment, repair and precision safety inspection.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.243-248
• /
• 2008

Seoul subway is an safety, quick, and clean public transportation to secure citizens safety. One of the most important elements of train is optimizing railroad function and need to conform railroad inspection for function maintenance. Railroad is the most biggest part of the railroad facility and it is a structure which requires sustainable maintenance. The purpose of study is to improve domestic metropolitan railroad facility inspection method and period. For this, we refer documents about present roving method, roving members and period of railroad roving. In addition, analyzed problems of railroad roving investigation method and period by examining the type and standards of railroad investigation and interviewing experts. By this, we analyzed improving plan and expectations of railroad maintenance and repair operation.