• 자연, 터널 그리고 지하공간
• /
• 제1권2호
• /
• pp.59-71
• /
• 1999

Recently, many deformations in tunnel such as crack and leakage were occulted. Specially, the defects of tunnel lining have been a serious problem in safety and stability many repair works for maintenance in tunnel have been carried out. Therefore, it is necessary to estimate the structural cracking for countermeasure in deformed tunnel and to investigate on the characteristics of lining system and the soundness of tunnel. In this study model tests for tunnel lining were carried out using test apparatus and centrifuge, In the direct loading test, the prototype was Kyungbu high-speed railway tunnel and the scale is 1/10, and lining models were made of concrete. Test conditions included load conditions such as direction, shape and type, lining conditions such as single and double lining, thickness, and reinforcement. In centrifuge model test, the prototype was Seoul subway tunnel and the scale is 1/100, and lining models were made of aluminum and hydrostone. Test conditions included tunnel defects such as thickness shortage. behind cavity and longitudinal cracks, reinforcement methods such as epoxy, grouting and carbon sheet. From these model tests , the characteristics of deformation and failure for tunnel lining were estimated, and the structural behaviors of deformed lining and the effects of repair and reinforcement for tunnel lining were researched.

• Composites Research
• /
• 제36권2호
• /
• pp.108-116
• /
• 2023

본 논문에서는 복합재료로 제작된 구조물의 유지보수 자동화를 위한 소형 매니퓰레이터 플랫폼 개발을 위해 기구학적 설계와 다물체 동역학 해석을 수행하였다. 매니퓰레이터의 기구학적 설계를 수행하기 위해 기존복합재 보수 공정을 고려하였다. 보수용 패치 적층 공정을 고려하여 매니퓰레이터와 엔드 이펙터의 기본 제원을 선정한 뒤 3-D 설계를 수행하였다. 이후 보수공정을 고려한 역기구학 해석을 통해 시뮬레이션 및 제어에 필요한 변수를 MATLAB에서 생성하였다. 플랫폼의 구조안정성 평가를 위해 Altair Inspire와 Optistruct를 통한 다물체 동역학 해석을 수행하였다. Inspire에서 진행된 시뮬레이션을 기반으로 Optistruct에서 다물체 동역학 해석을 수행한 뒤 시간에 따른 최대 변위와 Von-Mises 응력 결과를 통해 구조안정성을 검증하였다. 설계검증을 위해 플랫폼의 실제 제작 및 제어를 수행하여 시뮬레이션과 비교한 결과, 실제 보수과정 경로와 시뮬레이션이 잘 일치하는 것을 확인하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.87-88
• /
• 2022

For an earthquake-safe urban environment, the Republic of Korea conducts seismic performance evaluation in accordance with laws and guidelines to assign safety ratings and implement necessary management measures such as repairs and reinforcements. In the seismic performance evaluation result, structures lacking in preparation for earthquakes are prioritized and classified into measures such as repair, reinforcement, or careful observation to respond to physical risks such as earthquakes. Such repair and reinforcement work is not a one-time thing, but it is necessary to further enhance the effect through continuous follow-up observation. In this study, the location of the vertical and horizontal displacement measuring part of the construction part is displayed so that the post-construction status of the reinforcement construction part can be visually checked by identifying the problems in the process of post-monitoring in 2022 for the maintenance and reinforcement work of local governments' public facilities carried out in 2021. We propose a plan to institutionalize the installation of, inspection tools, and crack gauges at certain locations in the construction department, and to have facility managers periodically inspect and manage them with a smartphone program or the 'Facility Autonomous Safety Inspection' app.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제18권1호
• /
• pp.1-7
• /
• 2018

Purpose: Maintaining appropriate operational availability (Ao) is a key element of combat victory, but estimates vary according to estimation methods. The purpose of this study is to improve the accuracy of estimating operational availability by tracing the changes of the weapon system's failure rate, repair rate, and the level of logistic support. Methods: In order to track the change in the operating availability, the MDT (mean down time) is modeled by adding the repair time and the ALDT (administration and logistic delay time) to the service time. Results: Using the field data of the weapon system A operated by the ROKAF, the failure rate follows a non-homogeneous Poisson process that changes with time, and it is modeled considering the changing repair rate and the logistic support time. Conclusion: The accuracy of the analytical results was verified by comparing the actual operating data with the estimated availability. The results of this study can be used to track and evaluate the availability in a realistic situation where the failure rate and maintenance rate continuously change in operating environment.

• Animal cells and systems
• /
• 제13권4호
• /
• pp.405-409
• /
• 2009

When DNA double-strand breaks (DSBs) were induced in mammalian cells, many DNA damage response proteins are accumulated at damage sites to form nuclear foci called IR-induced foci. Although the formation of foci has been shown to promote repair efficiency, the structural organization of chromatin in foci remains obscure. BAF53 is an actin-related protein which is required for maintenance of chromosome territory. In this study, we show that the formation of IR-induced foci by $\gamma$-H2AX and 53BP1 were reduced when BAF53 is depleted, while DSB- activated ATM pathway and the phosphorylation of H2AX remains intact after DNA damage in BAF53 knockdown cells. We also found that DSB repair efficiency was largely compromised in BAF53 knockdown cells. These results indicate that BAF53 is critical for formation of foci by $\gamma$-H2AX decorated chromatin at damage sites and the structural organization of chromatin in foci is an important factor to achieve the maximum efficiency of DNA repair.

• Journal of the Korean Data and Information Science Society
• /
• 제27권6호
• /
• pp.1557-1564
• /
• 2016

최근에 기본보증이 종료된 이후에 주어지는 시스템의 추가보증에 대한 사용자의 관심이 증가되고 있다. 따라서 본 논문에서는 사용자 측면에서 비재생보증 하에서의 이단계 보전정책을 제안하였다. 이단계 보전정책의 첫 번째 단계에서는 추가보증을 구입할 것인지의 여부를 결정하고, 두 번째 단계에서는 보증이 종료된 이후의 최적의 교체 주기를 결정한다. 이때, 추가보증 동안에 발생된 시스템의 고장에 대해서는 판매자에 의해서 무료로 최소수리가 이루어진다. 최적의 이단계 보전정책을 결정하기 위해서 사용자 측면에서 기대비용을 사용하였으며, 끝으로 시스템의 고장시간이 와이블 분포를 따를 때 수치적 예를 통하여 제안된 이단계 보전정책을 설명하였다.

• 한국압력기기공학회 논문집
• /
• 제11권2호
• /
• pp.51-60
• /
• 2015

Local wall thinning and integrity degradation caused by several mechanisms, such as flow accelerated corrosion, cavitation, flashing and/or liquid droplet impingement, is a main concern in secondary steam cycle piping system of nuclear power plants in terms of safety and operability. Thinned pipe management program (TPMP) has being developed and optimized to reduce the possibility of unplanned shutdown and/or power reduction due to pipe failure caused by wall thinning. In this paper, newest technologies, standards and regulations related to the integrity assessment, repair and replacement of thinned pipe component are reviewed. And technical improvement items in TPMP to secure the reliability and effectiveness are also presented.

• 한국자동차공학회논문집
• /
• 제24권6호
• /
• pp.709-715
• /
• 2016

This paper presents a comparison of an experimental study on spot and plug welding of an automotive body panel. Spot welding is a common joining technology used in automotive body panel assembly. In automotive body repair, however, plug welding is widely used due to its technical simplicity and cost benefit. Some researchers have focused on the use of spot welding in the manufacturing process, but there has been very little research done with respect to the engineering analysis of the plug welding process. In this study, two kinds of specimens are considered to compare the difference of failure strength between spot weld and plug weld: normal tension and shear tension. The experimental results show, in both normal tension and shear tension, that spot welding has higher failure strength than plug welding. In addition, plug welding is more vulnerable to shear tension than normal tension. This study can be applied to further studies on practical optimization for maintenance and repair of automotive body panels.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.95-96
• /
• 2015

This paper aims to identify patterns in users' requests for facility management (FM) services in higher education facilities. We analyzed data collected from 309 service request forms, made available via a department office and an enterprise resource planning system, at a private university in Seoul between May 2009 and February 2015. We found that the number of user requests were the highest in September and October. Requests for electronic and communication (E/C) services outnumbered those for architectural services and mechanical and plumbing (M/P) services. Repair requests for doors and windows were the most common under architectural services; repairs for air-conditioners and radiators were the most commonly under M/P services; and installation of electrical outlets, telephone wires, and internet services were the most sought-after E/C services. Maintenance requests were received every three months, while repair requests were received every six or seven months.

• 한국독성학회:학술대회논문집
• /
• 한국독성학회 2001년도 International Symposium on Dietary and Medicinal Antimutgens and Anticarcinogens
• /
• pp.9-9
• /
• 2001

Several micronutrients (vitamins and minerals) are required as co-factors in DNA synthesis, DNA repair, DNA methylation and apoptosis. Some notable examples include (a) folic acid and vitamin B12 required for maintenance methylation of DNA and the synthesis of dTTP from dUTP, thus prevent the misincorporation of uracil into DNA, a highly mutagenic and chromosome-breaking event, (b) niacin, is essential in the form of the coenzymes NAD and NADP which act as a substrate for polyADPribose polymerase (PARP), an enzyme thought to facilitate efficient DNA repair and telomere length regulation and (c) zinc, apart from its antioxidant role as a co-factor in Cu/Zn SOD, it is required in its stabilizing role of the DNA-binding domain of p53 (residues 102-292) and thus is essential for apoptotic response to DNA damage. (omitted)