• Journal of the Korea Safety Management & Science
• /
• v.13 no.3
• /
• pp.209-215
• /
• 2011

Currently, 10% of the domestic aircraft accidents and 9% of delays and cancellations were generated due to poor maintenance. Aircraft maintenance work is divided into works in material warehouse and in hangar. In material warehouse, the problem in aircraft maintenance work is occurred when the serial number of parts are identified and entered. In hangar, work order are duplicatively written. In addition, the maintenance information is not shared and then work order is wrong delivered. In this study, we analyzed the maintenance process and the informations that occurs in the material warehouse and hangar for large airline company to solve the problems. And serial numbers are replaced by QR code. And documented work order and manual are handled using the tablet PC. In conclusion, this paper studied smart work of maintenance process about tire parts. We expect to improve the inefficiency of identification of serial number and total maintenance time is reduced by real-time information sharing.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.1
• /
• pp.183-188
• /
• 2011

Management of maintenance parts in the aircraft have difficulty because of high cost of part, necessity of separate managements, and very many kinds of parts. The serial number of parts was used in maintenance process and then the results was depended on worker's ability. Also the workers used printed work order and manual at every time in maintenance processes. In this study, we analyzed the maintenance process and the information that occurs in the material warehouse and hangar for large airline company to solve the problems about inventory and visualization. Based on above analysis we developed the maintenance process with integrated by information technologies such as QR code and tablet PC. We expect the reduced errors resulting from visually checking and decreased work hours and maintenance cost and will finally develop the smart work.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.6
• /
• pp.165-174
• /
• 2019

Naval ship maintenance generally produces various issues for effective maintenance methods and procedures, because they have been composed by numerous modules and systems, and manual-oriented maintenance needed well-trained technicians who always busy to do many other works. In this paper, we adapt SNA scheme to the service procedure and trends of ROK naval ships' equipments. Various SNA algorithms are deployed which show lots of operating options, and we show analysis results that have enough potential improvement points for the maintainers.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2000.10a
• /
• pp.629-636
• /
• 2000

In this study, we investigated the characteristics of labor of water management and maintenance, water requirement, water quality(T-N, T-P, COD) in the paddy plot irrigated by pipeline with two types of hydrants: automatic and manual. The automatic hydrant have been introduced to the paddy field to save water and reduce the labor for water management. The automatic hydrant is automatically opened and closed according to the water depth of a paddy plot. The automatic hydrant generally developed more troubles than the manual hydrant. The water requirements are 2.7mm/d for the automatic hydrant plot and 17.6mm/d for the manual hydrant plot. The concentrations of pollutants in the two plots are higher in the ponded water than in the irrigation water and are highest after fertilizer application.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.5
• /
• pp.594-601
• /
• 2015

The purpose of this research is to propose a maintenance support system for deciding assembly sequence of the product and appropriate tools that are used to assembly and disassembly of parts in the product when geometric properties of the product. The digital maintenance system (DMS) is developed to generate the maintenance guideline and the initial experiment is conducted especially for an underwater weapon system with cylindrical structure. DMS considers four factors to find the efficient assembly and disassembly procedure automatically: (1) assembly tree, (2) properties of each part, (3) distance from the center of the product, and (4) volume. Based on the factors, DMS simulate the movement of each tool virtually and the properties of tools are investigated to find an appropriate tool for using assembly and disassembly of each part in the product. The proposed approach integrates modeling, simulation, data configuration, and virtual reality to allow a development of preliminary maintenance guidance.

• Journal of Korean Society on Water Environment
• /
• v.36 no.1
• /
• pp.29-35
• /
• 2020

To manage the non-point source pollution and restore the water circulation, many technologies including infiltration or reservoir systems were installed in the urban area. These facilities have many problems regarding maintenance as their operation period becomes lengthier. The purpose of this study was to estimate the optimal maintenance timing through a long-term load test on the infiltration trench as one of the low impact development techniques. An infiltration trench was installed in the demonstration test facility, and stormwater was manufactured by Manual on installation and operation of non-point pollution management facilities from the Ministry of Environment, Korea and entered into the infiltration trench. Particle size distribution (PSD), suspended solids (SS) removal efficiency, and infiltration rate change tests were performed on inflow and outflow water. In case of the PSD, the maximum particulate size in the outflow decreased from 64 ㎛ to 33 ㎛ as the operating duration elapsed. The SS removal efficiency improved from 97 % to 99 %. The infiltration rate changed from 0.113 L/sec to 0.015 L/sec during the operation duration. The maintenance timing was determined based on the stormwater runoff requirements with these changes in water quality and infiltration rate. The methodologies in this study could be used to estimate the timing of maintenance of other low impact development techniques.

• Land and Housing Review
• /
• v.11 no.3
• /
• pp.83-92
• /
• 2020

In South Korea, problems caused by material deterioration of time-worn concrete structures have been increased recently. Because severe material deterioration could damage the structure's safety, it's important to evaluate the old structure's condition and structural capacity regularly to keep its proper performance. The safety evaluation of concrete structures has been initiated and performed periodically since 1995 according to a guideline in accordance with a law in Korea. The guideline prescribes the evaluation types, intervals and methods of the target structure. A lot of cost and labor have been invested every year to carry out the regular safety evaluation. However, it's not clear that the current manual could inspect the old structure's condition and assess the structural capacity precisely. Thus, the verification study initiated to figure out the Korean safety evaluation manual's practicalness. First, the Korean manual was analyzed and then compared with that of other countries for concrete bridges which are representative concrete structure. After that, the previously written evaluation reports were collected and analyzed to find out how the safety evaluation has been carried out. Based on the study results, the parts requiring verification of the manual were drawn. A research program is in progress in order to verify the parts by performing tests with actual structural members from decommissioned concrete bridges.

• Advances in concrete construction
• /
• v.1 no.1
• /
• pp.45-63
• /
• 2013

Upon completion of new concrete structures, the achieved construction quality always shows a high scatter and variability, and in severe environments, any weaknesses and deficiencies will soon be revealed whatever durability specifications and materials have been applied. To a certain extent, a probability approach to the durability design can take the high scatter and variability into account. However, numerical solutions alone are not sufficient to ensure the durability and service life of concrete structures in severe environments. In the present paper, the basis for a probability-based durability design is briefly outlined and discussed. As a result, some performance-based durability requirements are specified which are used for quality control and quality assurance during concrete construction. The final documentation of achieved construction quality and compliance with the specified durability are key to any rational approach to more controlled and increased durability. As part of the durability design, a service manual for future condition assessment and preventive maintenance of the structure is also produced. It is such a service manual which helps provide the ultimate basis for achieving a more controlled durability and service life of the given concrete structure in the given environment.

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.1 s.23
• /
• pp.99-108
• /
• 2005

Interactive electronic technical manual(IETM) for construction projects means an electronic tool that regulations and specifications related to construction method or maintenance process ale described by electronic book type. It has a meaning of integrated information system that includes virtual reality(VR), 3D animation and image contents for representing real construction information so that user can easily understand the construction situation and maintenance process. The basic information and technical manuals of construction facilities are being written as paper documents in our construction industry. As the result, the information management in the maintenance phase of construction projects is inefficient, and maintenance cost is being increased. This study attempts to improve the lack of understanding about construction IETM through the analysis of necessity and unique function of construction IETM comparing with the IETMS in other industry, Finally, this study shows a scenario of construction IErM for mitigating natural disaster of construction facilities to verify applicability of IETM.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.2036-2037
• /
• 2008

An Emergency Diesel Generator (EDG) manufactured by a French company Wartsila SACM, is a tandem type engine, consisted of two 10 cylindered diesel engines on each side. Manual provided by the manufacturer states that engine bearing requires inspection every 15 years. However, it is difficult for an inspector to access through a manhole located in the lower compartment of engine. Furthermore, during a routine or scheduled maintenance, it is not possible to disassemble main engine bearing and crank shaft, and perform inspection. Two methodologies are suggested here to resolve the problem. One method is to lift the engine and partially perform the maintenance service, and the other method is to disassemble the engine completely and to perform maintenance service by the manufacturer. Pros and cons of two methodologies were thoroughly compared.