• 한국지반공학회논문집
• /
• 제22권2호
• /
• pp.19-28
• /
• 2006

굴착 공정에 따른 주변지반의 거동 특성을 파악하기 위하여 굴착 깊이가 15m$\∼$29m인 3개 굴착현장에서 장기간에 걸쳐 계측을 실시하고 그 결과를 분석하였다. 이 논문에서는 본 굴착뿐만 아니라 토류벽 설치 및 지보 해체 작업이 굴착 주변지반의 거동에 미치는 영향을 정량적으로 평가하기 위하여 전체 굴착 공정을 굴토 전 준비 공정, 본 굴착 공정, 지보 해체의 세 공정으로 구분하여 계측을 수행하였다. 3개 굴착현장에서 이루어진 계측결과에 의하면, 지보 해체로 인하여 추가적으로 발생한 벽체 수평변위는 본 굴착단계에서 발생한 변위의 약 40$\%$ 내외였으며, 지표침하의 경우에는 본 굴착 시 발생한 침하체적의 $18\%\∼33\%$가 발생하였다. 이와 같은 현장계측 결과를 통하여, 굴착 전 및 지보 해체 공정 중에도 무시할 수 없을 정도의 지반 변위가 발생할 수 있음을 정량적으로 확인하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1990년도 PROCEEDINGS OF THE FIRST KOREA-JAPAN JOINT GEOTECHNICAL SEMINAR ON EXCAVATION and TUNNELING IN URBAN AREAS
• /
• pp.163-175
• /
• 1990

A main factor in the design of excavation in an urban area is the movements. The finite element method provides rational predictions of excavation behaviour, yet practical engineers may find difficulties in applying it to the actual field case. In this study, factors affecting the excavation behaviour are considered in details and the applicability of the finite element method to the actual field excavation cases is presented. Numerical examples are analyzed to provide results of parametric study on the affecting factors.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.606-611
• /
• 2009

MiStrut is a new method to establish structural stability in designing braced excavations by making a rigid connection between top-level steel beams and soldier beams. MiStrut has a function of working as a strut as well as supporting cover plates of top-level steel beams. The structural mechanism of MiStrut is supposed to reduce flexural deformation of soldier beams, which may lead to reduced lateral earth pressures behind excavation. In this research, for verification of the performance of MiStrut, shear-wave velocities of subsurface soil before and after excavation was compared. The rigid connection of main girder beams with soldir beams reduced shear-wave velocity by 67% and lateral earth pressures by 90%, which indicates that MiStrut is effective development in reducing lateral earth pressures on braced excavation.

• 대한기계학회논문집A
• /
• 제32권11호
• /
• pp.984-989
• /
• 2008

Hydraulic excavators have been one of the most popular devices in the various industries for construction, forestry and agriculture etc. Because the excavators generally work in poor environment, the various organizations study to automate those. In this paper, a hydraulic simulation for evaluation of automatical excavation system is presented. It is using the AMESim based on the 1.5 ton excavator with fixed displacement pumps, and operated by signals those control pilot pressure to spools of the main control valve. The main control valve is regarded that only consists of boom, arm and bucket. This simulation program is expected to apply to evaluation of the controller for automatic excavation system and to estimate of effect in accordance with change of some components or parameter.

• Geomechanics and Engineering
• /
• 제35권2호
• /
• pp.109-119
• /
• 2023

Ground subsidence in urban areas due to excessive development and degraded underground facilities is a serious problem. Geophysical surveys have been conducted to estimate the distribution and scale of cavities and subsidence. In this study, electrical resistivity tomography (ERT) was performed near an area of road subsidence in an urban area. The subsidence arose due to groundwater leakage that carried soil into a neighboring excavation site. The ERT survey line was located between the main subsidence area and an excavation site. Because ERT data are affected by rapid topographic changes and surrounding structures, the influence of the excavation site on the data was analyzed through field-scale numerical modeling. The effect of an excavation should be considered when interpreting ERT data because it can lead to wrong anomalous results. A method for performing 2D inversion after correcting resistivity data for the effect of the excavation site was proposed. This method was initially tested using a field-scale numerical model that included the excavation site and subsurface anomaly, which was a loosened zone, and was then applied to field data. In addition, ERT data were interpreted using an existing in-house 3D algorithm, which considered the effect of excavation sites. The inversion results demonstrated that conductive anomalies in the loosened zone were greater compared to the inversion that did not consider the effects of excavation.

• 한국지반공학회지:지반
• /
• 제13권2호
• /
• pp.101-124
• /
• 1997

풍화토 및 모래질 충적토가 암반위에 쌓인 형태로 구성된 국내 수도권 도심 지역에서, 깊은 굴착 공사로 인하여 발생하는 인접 지표의 침하에 대해 현장 측정을 중심으로 연구를 수행하였다. 먼저, 토류벽 설치, 중간 말뚝 설치 등 본격적인 굴토 공사가 진행되기 이전의 공정으로 인한 인접 지표침하량, 침하 영향거리 등을 측정, 분석하였으며 다음으로, 본격적인 굴토로 인하여 발생하는 인접 지표의 침하에 대해 침하량, 침하 영향거리 등을 측정, 분석하고 균질한 사질토 지반이나 단단한 점토 지반에 대해 기존에 제시된 연구 결과와 비교하였다. 또한 굴착 공사시 과도한 변형으로 인하여 인접 지표 및 구조물에 균열 등의 피해가 발생한 7개 현장 사례를 통하여 굴착 공사로 인한 인접 지표의 균열 발생 범위에 대하여 분석하였다.

• 터널과지하공간
• /
• 제33권4호
• /
• pp.255-264
• /
• 2023

근래 들어 도심지 지하공간 개발에 대한 수요가 증가함에 따라 도심지 터널계획이 활발히 진행되고 있다. 도심지 구간에는 주민 생활환경을 고려하여 지하정거장이 계획되며, 기존 구조물의 안정성 및 환경훼손 저감 등을 위해 2-Arch터널 정거장을 적용하고 있다. 그러나 도심지 구간은 심한 풍화작용에 따라 불량지반의 심도가 깊게 발달되어 터널 안정성 확보를 고려한 신중한 계획이 요구된다. 이뿐만 아니라 도심지의 복합적인 지반상태를 고려하여 본선터널에 TBM 기계굴착 공법을 적용하는 경우, 기존 NATM형 2-Arch터널과는 시공연계성을 확보할 수 없게 된다. 본 연구에서는 쉴드TBM과 2-Arch터널을 조합한 형태인 TBM선굴진 2-Arch터널을 국내 최초로 적용한 설계사례를 중점으로 기술하고자 하였다. 중앙터널 굴착후 좌우터널 시공을 고려하여 쉴드TBM 세그먼트 설치 및 해체를 위해 고려한 설계사항을 설명하고, 수치해석을 활용한 안정성 검토를 통해 TBM선굴진 2-Arch터널의 설치효과를 검증하였다.

• 대한건축학회논문집:계획계
• /
• 제34권5호
• /
• pp.79-88
• /
• 2018

The purpose of this study is to analyze the plan type of excavation remains during the Mid to Late Joseon period around Jong-ro area in Seoul. 523 building remains were selected in accordance with plan type could identified through the excavation investigation report. Among these, 276 building remains were verified to the $15-16^{th}$, 145 and 102 building were verified to the 17-18th and the $19^{th}$ century. By classifying excavation remains, four dominant plan type of the each century came out. First, -shape was the most common plan type took nearly 50 percent. In a considerable proportion of cases, this plan type seems an annex of main building. However, -shape plan type also seemed to be used for main building in some cases. ㄱ and ㄷshape plan type took the second and the third. In most cases, these types seemed typical plan used for a main housing building. For the last, ㅁshape plan type identified the most unusual. This plan type merely took under five percent but, these cases are meaningful because it shows the plan alteration from ㄷshape to ㅁshape plan type. Existence proportion between each plan types of the $15-16^{th}$ century were continued to the $18-19^{th}$century without small changes between -and ㄱ types in $17-18^h$ century. By examining selected excavation remains, installing front Toi space on ㄱ, ㄷ and ㅁshape plan type stand out clearly compared with -shape plan type. From this tendency, it could be considered that plan type became a significant factor influenced installing Toi space. Similar to periodical tendency of plan type was not changed dramatically, the rate of installing Toi space in the $15-16^{th}$ century was not changed much until the $18-19^{th}$ century. It also shows the close relation between plan type and installing Toi space. In some excavation remains, floor type in the $15-16^{th}$ century also verified. There are some points of similarities on installing typical location of On-dol, Ma-ru and Bu-eok in these excavation remains with later period housing type such as Ut-Bang-Gguk-Oem-Jib and Ddeul-Jib.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1991년도 추계학술발표회 논문집 지반공학에서의 컴퓨터 활용 COMPUTER UTILIZATION IN GEOTECHNICAL ENGINEERING
• /
• pp.123-132
• /
• 1991

The GEOKST program was used to solve the tunnel example problem. The package can solve such geotechnical problem as excavation, embankment, foundations, etc., in which the soil can be modeled by various elastoplastic geomaterial models. The main objective was to consider the effects of excavation depth to the face of the tunnel on the stability of the ground and support system. Depended on the strength of the ground materials, the limit excavation depth without any support system could be established by analyzing three-dimensional excavation problem. In this given example problem, the strengths of the ground materials were enough for the stability of the tunnel without any support system up to fairly deep excavation and the maximum tunnel section displacement was stabilized as the excavation proceed. The asymptotic value was approximately the same as that of the plane strain analysis. Thus, assuming the plain strain condition and simulation the actual excavation procedure, the maximum tunnel section displacement was caculated after final step. The maximum calculated displacement occured at the top section of the tunnel geometry and was about 8mm.

• 드라이브 ㆍ 컨트롤
• /
• 제18권2호
• /
• pp.20-31
• /
• 2021

An excavator is a construction machine that can perform various tasks such as trenching, piping, excavating, slope cutting, grading, and rock demolishing. In the 2010s, unmanned construction equipment using ICT technology was continuously developed. In this paper, the path design process was studied to implement the output data of the decision stage, and the path design algorithm was developed. For example, the output data of the decision stage were terrain data around the excavator, excavator mechanism information, excavator hydraulic information, the position and posture of the bucket at key points, the speed of the desired bucket path, and the required excavation volume. The result of the path design was the movement of the hydraulic cylinder, boom arm, bucket, and bucket edge. The core functions of the path design algorithm are the function of avoiding impact during the excavation process, the function to calculate the excavation depth that satisfies the required excavation volume, and the function that allows the bucket to pass through the main points of the excavation process while maintaining the speed of the desired path. In particular, in the process of developing the last function, the node tracking method expressed in the path design table was newly developed. The path design algorithm was verified as this path design satisfied the JCMAS H02 requirement.