• 한국강구조학회 논문집
• /
• 제25권4호
• /
• pp.335-346
• /
• 2013

AASHTO LRFD 및 도로교한계상태설계기준에서는 신뢰도 기반 활하중 모델로부터 결정된 트럭하중과 차로하중을 동시에 재하하도록 하고 있으며, 트럭하중은 충격계수를 고려하되 차로하중은 충격계수를 적용하지 않도록 규정하고 있다. 본 연구에서는 중앙경간 230m, 400m 및 540m의 멀티케이블 강합성 사장교를 대상으로 트럭하중과 차로하중이 동시에 주행하는 경우에 대해 차량-교량 상호작용 해석을 수행하고 케이블과 보강거더의 충격계수를 평가하였다. 트럭하중은 6-자유도의 차량 모델을 사용하였으며, 차로하중은 일련의 1축 차량이 연행해서 주행하는 것으로 모사하였다. 교량의 감쇠비가 충격계수에 미치는 영향을 평가하였으며, 충격에 영향을 미치는 주요 인자인 노면조도와 주행속도를 해석변수로 고려하였다. 노면조도는 ISO 8608 규정에 근거하여 랜덤 생성하였으며, 차량-교량 상호작용해석 시 노면조도는 트럭하중에만 적용하였다. 한편, 사장교의 충격계수 평가를 위해 실무에서 사용되고 있는 영향선 기법에 의한 충격계수를 동적 상호작용 해석에 의한 결과와 비교하였다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1253-1253
• /
• 2001

The ability to accurately assess wine quality is important during the wine making process, particularly when allocating batches of wines to styles determined by consumer requirements. Grape payments are often determined by the quality category of the wine that is produced from them. Wine quality, in terms of sensory characteristics, is normally a subjective measure, performed by experienced winemakers, wine competition judges or winetasting panellists. By nature, such assessments can be biased by individual preferences and may be subject to day-to-day variation. Taste and aroma compounds are often present in concentrations below the detection limit of near infrared (NIR) spectroscopy but the more abundant organic compounds offer potential for objective quality grading by this technique. Samples were drawn from one of Australia's major wine shows and from BRL Hardy's post-vintage wine quality allocation tastings. The samples were scanned in transmission mode with a FOSS NIR Systems 6500, over the wavelength range 400-2500 ㎚. Data analysis was performed with the Vision chemometrics package. With samples from the allocation tastings, the best correlations between NIR spectra and tasting data were obtained with dry red wines. These calibrations used loadings in the wavelengths related to anthocyanins, ethanol and possibly tannins. Anthocyanins are a group of compounds responsible for colour in red wines - restricting the wavelengths to those relating to anthocyanins produced calibrations of similar accuracy to those using the full wavelength range. This was particularly marked with Merlot, a variety that tends to have relatively lower anthocyanin levels than Cabernet Sauvignon and Shiraz. For dry white wines, calibrations appeared to be more dependent on ethanol characteristics of the spectrum, implying that quality correlated with fruit maturity. The correlations between NIR spectra and sensory data obtained using the wine show samples were less significant in general. This may be related to the fact that within most classes in the show, the samples may span vintages, glowing areas and winemaking styles, even though they may be made from only one grape variety. For dry red wines, the best calibrations were obtained with a class of Pinot Noir - a variety that tends to be produced in limited areas in Australia and would represent the least matrix variation. Good correlations were obtained with a tawny port class - these wines are sweet, fortified wines, that are aged for long periods in wooden barrels. During the ageing process Maillard browning compounds are formed and the water is lost through the barrels in preference to ethanol, producing “concentrated” darkly coloured wines with high alcohol content. These calibrations indicated heaviest loadings in the water regions of the spectrum, suggesting that “concentration” of the wines was important, whilst the visible and alcohol regions of the spectrum also featured as important factors. NIR calibrations based on sensory scores will always be difficult to obtain due to variation between individual winetasters. Nevertheless, these results warrant further investigation and may provide valuable Insight into the main parameters affecting wine quality.

• Journal of Ecology and Environment
• /
• 제44권3호
• /
• pp.126-142
• /
• 2020

Background: Most of the Pinus densiflora forests, occupying the largest area, have been restored in South Korea since the 1970s. As young pioneer forests, the succession process is under way. Since the forests are distributed nationwide and are vulnerable to disturbances, the process may differ depending on the geography and/or site conditions. Therefore, we reviewed the direction, the seral communities, and the late-successional species of progressive and disturbance-driven succession nationwide in the cool-temperate zone through meta-analysis and empirical observations. Main text: As a result of a meta-analysis of the direct succession and vertical structure, we found that the P. densiflora forest is in a directionally progressive succession, changing to the broadleaved forest after forming a mixed forest with its overwhelming successor, Quercus species (particularly Q. mongolica and Q. serrata). In dry stands in a relative sense, the Quercus species was favored occupying over 80% of the abundance of the succeeding species. Therefore, in dry stands, it is presumed that Quercus-dominated stage would last for a long time due to the current dominance and long life span, and eventually, it settles as Quercus-broadleaved forest with a site change. Contrary to this, it is presumed that in mesic stands where Quercus species do not occur or have low abundance, the late-successional broadleaved species settle early to form a co-dominant forest with multiple species. Due to geographical limits, the species composition of the two late-successional forests is different. Disturbances such as insect pests and fire retrogressed vulnerable P. densiflora forest for a while. However, it was mostly restored to the Quercus forest and is expected to be incorporated in the pathway of the dry stand. Conclusions: We revealed the succession process of P. densiflora forests according to geography and moisture and found that stand moisture had a decisive effect on the species and abundance of the successor. Although the P. densiflora forest is undergoing structural changes, the forest is still young; so within a few decades, physiognomy is not likely to change. Therefore, the decrease in the forest area may be due to other causes such as disturbances and forest conversion rather than due to succession.

• 생물환경조절학회지
• /
• 제5권2호
• /
• pp.174-186
• /
• 1996

This study was carried out in order to understand the plan, design, constructing and actual condition of management of modernized horticultural facilities in Kyungpook Province which had been constructed from 1992 to 1995 funded by Government support. The aim of this study is to provide reference data for success of the forth project. It was performed by making up a question about driving of project and management condition of equipment after constructing. The results obtained from this study are as follows: 1. 73.5% of facilities horticulture farmhouse recognized that the prospect of greenhouse is bright, but 92.5% of the farmhouse also recognised that they need technical consultation on protected horticulture farming. Therefore, technical educations would must be enhanced about foundation of greenhouse and cultivation technique. 2. The holding times of explanatory meetings, cause of understanding to farmhouse, were one or two times in greenhouse construction, and 62.5% of the farmhouse expressed the insufficiency at the explanation and educational data. For this reason, it was judged that the construction contract had been delayed more than 5 months in 49.3% of the farmhouse after the decision of project budget. 3. In constructing after a contract, the rates of construction delay is 53.4% and defect occurrence is 41.1%. The biggest reasons of construction delay was insufficiency of worker and materials supply. Each percentage is 29.1%. And the reason of defect occurrence is badness of machinery equipment(62.9% ). 4. In management of greenhouse, a pipe-constructed plastic film greenhouse changes plastic film every one and three years because of sticking dust on plastic film. It was needed to about in cleaning technique of coverings. Because that used 3-5 years only half of the expected life span. 5. The order of broken rating in the subsidiary equipment is like this lollop ventilator (42.8%), a general control system(33.3%) especially, in the case of a general control system, the rate of all family can control is 52.7%. so, it is time to develop easy control equipment which every one could use as soon as possible. 6. When choose heat generator as decide capacity, the most priority is the mount of heat generator the percent is 45.5% heat generator and as decide model, the private purchase's percent is 77.3%. It is higher than a public bidding heat generator the percent is 22.7% heat generator when it compare with a public bidding. In the case of $CO_2$ generator, using rate is only 19.0%. The using rate is very low, so it needs education how to use depends on the way of the subsidiary equipment. 7. In the case of seedlings, it is asked to use factory-processed seedling effectively. because it's difficult to get security of labors(58.8%), hoped crops (55.9%) access same crops(29.4%) much more and changing of crops depends on market situation. that is the main reason the lack of knowhow.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.109-118
• /
• 1993

Development process of agricultural technology has been studied with a case study of Korean agriculture. Technological is considered as a transformer of inputs into outputs and hence technological appropriateness, an important aspect of agricultural development strategies, is considered as a dynamic concepts. Considering the concept of agricultural system as a delivery system for providing essential materials and services to producers and consumers, it has been divided into two major groups of dimensions vis. external challenge dimensions and internal response dimensions. Market, investment and agro-ecosystem constitute the external challenge dimensions : whereas trade , technology as well as production and resources allocation constitute internal response dimensions. The system manager is responsible for maintaining equilibrium in the mentioned six sub-systems. Two kinds of alternatives paths of technological development viz. land saving technology and labour saving technolog have been studied. Technology is considered as a combination of four basic components viz. facilities, abilities, facts and frameworks. Adoption of innovation in agriculture depends on profitability, awareness, risk aversion, financial capacity, institutional infrastructure, availability of physical inputs and adaptability to the local conditions. For a cast study of Korea, changes in the agricultural system through external challenge dimensions are investigated. The impacts of industrialization on agro-ecosystem reported are shift of labour from the agricultural sector to non-agricultural sectors and continuously increasing demand of farm the agricultural sector to non-agricultural sectors accompanied by increase in land prices. The impacts on the commodity market discussed are shift in demand from rice, barley and other cereals to meat , dairy products and vegetables : and increasing in supply capacity of agricultural inputs. The process of agricultural development from 1962 to 19 1 9 (i.e. from start of the first to the end of the sixth five year plan) are also discussed in details with several policy measures taken. The trend of agricultural income and productivity are also analyzed. The main cause of increase in the agricultural income is considered as increase in labour productivity. The study revealed that during the span of 1965-88, holding size has not changed significantly, but both the land and labour productivity increased and so did the agricultural income. R&D activities in Korea have changed over time in three stages vix. import of improved technology, localization by adaptive research and technological mastery. For the new technology to be made affordable to farmers, policy measures like fertilizer and food grain exchange system, dual price system in rice and barely and loan for machinery were strengthened.

• Current Research on Agriculture and Life Sciences
• /
• 제30권1호
• /
• pp.27-33
• /
• 2012

본 연구는 우리나라 플라스틱온실 피복재의 피복방법 및 관리방법을 개선할 수 있는 방안을 구명하는데 필요한 자료를 제공하기 위하여 상업용으로 운영되고 있는 대표적인 구조 및 피복형태의 온실에 대하여 겨울철 온실 내부의 광합성유효광량자속을 측정하고 변화를 분석하였으며 결과를 요약하면 다음과 같다. 일일적산 광합성유효광량자속의 월중 변화를 분석한 결과 모든 온실에 있어서 광량변화의 경향이 일조시간의 변화 경향과 대체로 잘 일치하는 것으로 나타났으나, 온실 간에 일일적산 광량의 차이는 상당히 큰 것으로 나타났으며, 겨울철에는 모든 온실이 토마토 생육에 필요한 적정 광량에 미치지 못하는 것으로 나타났다. 월평균 일일적산 광합성유효광량자속의 연중변화를 분석한 결과 실험온실 모두 투과광량을 높이기 위하여 겨울철에도 내부피복재를 대부분 개방하였기 때문에 내부피복재의 오염으로 인한 광투과율의 저하는 미미하였으며 주로 외부피복재의 오염으로 인해 투과광량이 감소하는 것으로 분석되었다. PO필름으로 피복된 단동온실의 광 투과 성능이 매우 우수하다는 사실을 확인할 수 있었다. 피복재를 더 효율적으로 사용하기 위해서는 피복재의 교체시기를 겨울철광량이 부족한 시기가 시작되기 전인 10월 또는 11월경으로 하는 것이 바람직할 것으로 판단되었다. 온실간 광량의 차이가 최대 40%정도까지 나기 때문에 투과광량이 낮은 온실은 즉시 피복재를 교체하여 광투과율을 높이는 것이 경제적일 것으로 판단되었다. 온실의 투과광량 감소요인을 분석한 결과 투과광량을 감소시키는 내부요인은 보온커튼, 내부피복재, 결로받이 등인 것으로 분석되었다. 광폭형 단동온실의 경우에는 비교적 넓은 온실 폭의 중앙에 보온커튼과 내부피복재를 걷어 두고 있기 때문에 온실 전체 폭에 비해 걷혀 있는 보온커튼과 내부피복재의 폭이 비교적 작아 다른 온실에 비해 광 손실이 상대적으로 적을 것으로 분석되었다. 종합적으로 비교해 볼 때 광폭형 단동온실이 광 투과 측면에서 가장 우수한 것으로 나타났고 내부피복재를 중앙에서 권취하여 개방하는 형태의 온실이 가장 바람직하지 못한 것으로 분석되었다.

• 한국산학기술학회논문지
• /
• 제18권3호
• /
• pp.135-145
• /
• 2017

본 연구의 목적은 산업분야로의 기술이전을 목적으로 연구개발을 수행하는 공공부문의 연구기관과 관련 정책을 수립하는 정부 기관 등 이해 관계자에게 '기술도입 기업' 입장에서 고려하는 중요한 기술료 산정 변수가 무엇인지에 대한 의미있는 정보와 시사점을 제공하기 위함이다. 이를 위하여 본 연구에서는 2011년부터 2015년까지 농촌진흥청 차세대바이오그린 21 국책 연구 사업을 통하여 유상 기술이전을 받은 N사업단의 85개 기업을 대상으로 2016년 10월 1일부터 10월 31일 1개월 동안 AHP 설문 조사를 통하여 기술료 결정요인의 중요도에 대한 실증 분석을 실시하였다. 분석 결과 기술도입 기업에서는 1)기술 활용에 따른 수익성, 2)경영진의 관심 및 의지, 3)기술도입의 필요성 및 긴급성 순서로 기술료 결정을 위한 중요도의 우선순위가 작용하고 있는 것으로 나타났다. 이러한 연구결과를 통하여 첫째, 향후 국가 R&D 연구 정책 또는 국책 연구를 수행하는 기관에서 단기간에 현장 활용성이 높고 제품화 등 기술도입 기업의 수익성에 도움이 되는 기술을 개발해야 한다는 것 둘째, 기술료 지불 절차와 방법, 기간 등에 대해 기술도입 기업의 경영적 부담을 줄여주어야 한다는 것 셋째, 국책 연구 과제를 공모할 때는 기술 개발의 시급성이 반영되어 연구수행 기간이 산정되어야 한다는 시사점이 도출되었다.

• 생물환경조절학회지
• /
• 제15권4호
• /
• pp.289-295
• /
• 2006

온실의 환기연구를 위한 CFD 시뮬레이션 모델에 토마토 작물을 설계함에 있어서 우선적으로 작물군의 기하학적 형상 설계 및 이의 공기 항력계수를 찾고자 하였다. 작물군 형상을 간단한 형태의 공기투과성 매체로 설계하고 이의 공기저항의 물리적 특성을 풍동실험을 통하여 구하였다. 토마토 작물군과 작물군 사이에서 측정된 값과 작물군 중앙부에서 측정되어진 값들을 분리하여 계산하여 된 결과 공기저항값인 항력계수 $C_d 값은 각각 0.2551와 0.2621로 나타났다. 최종적으로 이들의 평균값인 0.26을 Fluent CFD 프로그램의 작물군 공기투과성 매체의 x, y, z축의 내부저항값으로 입력되었다. 이 실험결과를 이용하여 전산유체역학 (CFD)을 이용한 시설내 작물군이 존재하는 경우의 온실 환기연구를 효과적으로 수행할 수 있게 되었다. 또한 풍동을 이용한 작물의 공기저항 연구를 위한 실험방법을 개발하여 앞으로도 다양한 작물들을 대상으로 공기유동의 물리적 특성연구를 수행할 수 있게 되었다.

• 한국치위생학회지
• /
• 제9권4호
• /
• pp.644-658
• /
• 2009

Objectives : This study was to find out the status of job satisfaction and intent to leave the job for dental hygienists, and those factors affecting their intent to leave, so as to prevent dental hygienists from leaving their jobs in advance, and to strive for extending the life span of the job, contributing to improve dental care services provided by dental hygienists. Methods : The data were collected from 280 dental hygienists working in dental clinics or hospitals in Busan and Gyeongnam area by using a structured and self-administered questionnaire through mail, from February 1 to March 15, 2009, and were analyzed by using SPSS WIN 14.0 program. Results : First, It was the most prevalent for the dental hygienists surveyed to be between 100 to 149 thousand won in the level of monthly as 42.3%, and to be the assistance of dental examination and treatment for main duty as 62.5%. Leaving job was experience by 51.6% of the subjects, with work condition as the most common reason for 32.2%. Second, the degree of job satisfaction was 3.4 points overall in the score of 5 point Likert's scale on the average, showing affirmative level above the average, and significantly different according to certain characteristics such as age, education level, total years of work career, years of work career in the current job, monthly salary level, whether to provide monthly paid leave, and the number of patients treated per day. It also was significantly correlated with some structural factors and variables consisting attitude and value, including equity in pay(r=0.612), job perception as dental hygienist(r=0.573), work environment(r=0.552), self growth(r=0.531), affirmative attitude(r=0.421), and so on. Third, the mean score of intent to leave was 2.73 overall and lower than the average, showing significant relationship with some characteristics, such as age, marital status, education level, total years of work career, years of work career in the current job, monthly salary level, whether to provide monthly paid leave, and the number of patients treated per day. Intent to leave also showed the highest correlation with job satisfaction(r=-0.708), followed by equity in pay(r=-0.482), self growth (r=-0.453), job perception as dental hygienist(r=-0.392), work environment(r=-0.362), etc. Forth, job satisfaction was significantly influenced by some factors including equity in pay, followed by job perception as dental hygienist, relationship with fellow colleagues, affirmative attitude and work environment, and so on. Fifth, the intent to leave was significantly affected not only by job satisfaction but also by some structural factors including equity in pay, self growth and job perception as dental hygienist. Conclusions : The above results showed that the equity in pay was the most important factor for the intent to leave the job as well as job satisfaction among dental hygienists, thus suggesting that systematic measures should be provided to improve the job satisfaction to prevent economic loss due to leaving job frequently, and to provide pertinent reward system as a profession to enhance the motivation for accomplishment on job for dental hygienists.

• Archives of Plastic Surgery
• /
• 제35권6호
• /
• pp.698-702
• /
• 2008

Purpose: Basal cell carcinoma is one of the most common cancers in the western population and the annual incidence rate is still on an increasing course. In Asian countries such as Korea, the incidence of basal cell carcinoma is reported to be remarkably low but is estimated to be in a steep increase nowadays. This study was to analyze the recent clinical trends of basal cell carcinoma in Korea by reviewing a single institution's experience. Methods: Throughout an 11-year period, the surgical excision of 143 cases of basal cell carcinoma was performed in our department. General data of these cases such as the primary site of cancer, age and sex of the patient, operative methods, recurrence rate were reviewed retrospectively. Results: Among the 143 patients included in this study, 82 patients were men and 61 patients were women. The ages ranged from 27 to 89 years with a mean age of 64.0 years. The head and neck region was the most frequently involved primary site for the cancer as 95.1% of the total cases occurred in this area. Especially the nose and perinasal area were the most frequent region, which was followed by the periorbital area, cheek, and perioral area. During this study period, 9 cases showed recurrence of the cancer as the overall recurrence rate was 6.3%. Conclusion: Gradual increase in the incidence of basal cell carcinoma was demonstrated in this study. Basal cell carcinoma showed high incidence in the old-age population as 68.5% of the total patients were more than 60 years of age. High recurrence rate was noted in the nasal region especially after local flap reconstruction. A more cautious approach is to be required when handing such high risk lesions. Multiple factors such as extended life span, increased outdoor leisure activity and exposure to sunlight, higher accessibility to medical services and increased understanding of the public about skin cancer are assumed to be the main reasons for this increase of basal cell carcinoma.