• Steel and Composite Structures
• /
• 제28권6호
• /
• pp.671-679
• /
• 2018

The paper is devoted to the stability analysis of a simply supported five layer sandwich beam. The beam consists of five layers: two metal faces, the metal foam core and two binding layers between faces and the core. The main goal is to elaborate a mathematical and numerical model of this beam. The beam is subjected to an axial compression. The nonlinear hypothesis of deformation of the cross section of the beam is formulated. Based on the Hamilton's principle the system of four stability equations is obtained. This system is approximately solved. Applying the Bubnov-Galerkin's method gives an ordinary differential equation of motion. The equation is then numerically processed. The equilibrium paths for a static and dynamic load are derived and the influence of the binding layers is considered. The main goal of the paper is an analytical description including the influence of binding layers on stability, especially on critical load, static and dynamic paths. Analytical solutions, in particular mathematical model are verified numerically and the results are compared with those obtained in experiments.

• 전기전자학회논문지
• /
• 제14권4호
• /
• pp.297-304
• /
• 2010

This paper presents a link layer design of DisplayPort interface with a state machine based on packet processing. The DisplayPort link layer provides isochronous video/audio transport service, link service, and device service. The merged video, audio main link, and AUX channel controller are implemented with 7,648 LUTs(Loop Up Tables), 6020 register, and 821,760 of block memory bits synthesized using a FPGA board and it operates at 203.32MHz.

• 대한기계학회논문집A
• /
• 제21권5호
• /
• pp.791-799
• /
• 1997

The wear characteristics and wear mechanisms of plasma sprayed Al/sub 2/ O/sub 3/-40%TiO/sub 2/ and Cr/sub 2/O/sub 3/ deposited on casting aluminum alloy(AC4C) were investigated. Specimens were processed for various coating thicknesses. Ball on disk type wear tester was used for wear test. The scratch test on plasma sprayed coating surface showed that critical load to break the coating layer was greater than 40 N. The critical load increase with the increase of coating thickness of specimens. The friction coefficient of Cr/sub 2/O/sub 3/ coating layer was less than that of Al/sub 2/O/sub 3/-40%TiO/sub 2/ coating layer. The wear resistance of Cr/sub 2/O/sub 3/ coating layer was greater than that of Al/sub 2/O/sub 3/-40%TiO/sub 2/ coating layer. Microscopic observation of worn surfaces was made by SEM. SEM observation showed that the main mechanism of wear for Al/sub 2/O/sub 3/-40%TiO/sub 2/ coating layer was abrasive wear under 50 N. For the case of Al/sub 2/O/sub 3/-40%TiO/sub 2/ coating layer, as the surface cracks perpendicular to sliding direction propagated, the wear debris was generated in wear track. However, the main mechanism of wear for Cr/sub 2/O/sub 3/ coating layer was brittle fracture under 150 N.

• Journal of the korean society of oceanography
• /
• 제38권1호
• /
• pp.11-16
• /
• 2003

The three dimensional structure of thermohaline circulation in a D-plane is investigated using a conceptual two layer model and a scaling argument. In this simple model, the water mass formation region is excluded. The upper layer represents the oceans above the main thermocline. The lower layer represents the deep ocean below the thermocline and is much thicker than the upper layer. In each layer, geostrophy and the linear vorticity balance are assumed. The cross interfacial velocity that compensates for the deep water mass formation balances downward heat diffusion from the top. From the above relations, we can determine the thickness of the upper layer, which is the same as thermocline depth. The results we get is basically the same as that we get for an f-plane ocean or the classical thermocline theory. Mass budget using the velocity scales from the scaling argument shows that western boundary and interior transports are much larger than the net meridional transport. Therefore in the thermohaline circulation, horizontal circulation is much stronger than the vertical circulation occuring on a meridional plane.

• Nuclear Engineering and Technology
• /
• 제5권3호
• /
• pp.202-213
• /
• 1973

본 연구의 제1보에 뒤이어서 방향족 염소유도체외 Szilard Chalmer 반응으로 얻어진 유기충치 성분을 분리하여서 표지 조건을 검토하였다. 여러가지 성분을 모두 분리할 수는 없었으나 주성분을 증류법 및 박층 Chromatography등으로 분리하였으며 그 화학구조가 원시료의 표지물임을 확인하였다. 고체시료의 경우에는 주성분이 유기표지물의 80-60%이였고 액체시료에 있어서는 70% 이하였다. 장시간 조사하면 주성분 수율이 증가되었으나 방사선에 불안정한 화합물의 경우에는 도리어 감소하였다. Chromatography로 분리되는 부생성물들의 수율은 액체시료의 경우 많았으나 고체의 경우는 이 보다 적었고 따라서 주생성물의 분리가 용이하였다. 각 화합물의 표지수율을 표시하고 Chromatography에 의한 분리조건을 논의하였으며 이 표지 방식의 실용성을 화학구조와 관련시켜 고찰하였다.

• 한국추진공학회지
• /
• 제5권3호
• /
• pp.25-32
• /
• 2001

본 연구에서는 2차원 압축성 Navier-Stokes 방정식을 이용하여, 약한 수직충격파와 난류 경계층의 간섭현상에 대한 피동제어 유동장을 수치계산법으로 조사하였다. 벽 내부에 공동을 가지는 다공벽을 사용하여 충격파와 난류경계층간 상호간섭을 제어하였다. 본 연구로부터 $\lambda$형 충격파의 하류쪽 가지를 중심으로 하여, 그 하류에서는 주유동이 공동내부로 또 그 상류에서는 공동내부로부터 주유동쪽으로 피이드백되는 유동을 관찰하였으며, 다공벽의 구멍을 통하는 유동은 초크하지 않는다는 것을 알았다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2002년도 정기총회 및 제4회 특별심포지움
• /
• pp.163-178
• /
• 2002

지표레이다 (GPR)를 이용하여 하상 퇴적물 조사를 수행하였다. 조사지역은 수심이 약 2.5 m 정도로 얕고, 물이 흐르지 않는 호수이며, 조사대상인 뻘 (mud)층의 두께가 얇아 GPR이 매우 효율적인 탐사방법이다. 조사결과 수심하부 층서구조, 즉 뻘층, 모래층, 자갈 및 기반암의 구조를 효율적으로 파악할 수 있었으며, 주 제거대상인 뻘층의 경우 여러개의 탐사 측선으로부터 그 분포 및 총 퇴적량을 추정하였다 이러한 결과는 향후 이 지역에서의 준설을 위한 기초자료로 매우 중요하게 사용될 수 있을 것이다.

• 한국도로학회논문집
• /
• 제19권5호
• /
• pp.107-115
• /
• 2017

PURPOSES : The piezoelectric energy road analysis technology using a three-dimensional finite element method was developed to investigate pavement behaviors when piezoelectric energy harvesters and a new polyurethane surface layer were installed in field conditions. The main purpose of this study is to predict the long-term performance of the piezoelectric energy road through the proposed analytical steps. METHODS : To predict the stresses and strains of the piezoelectric energy road, the developed energy harvesters were embedded into the polyurethane surface layer (50 mm from the top surface). The typical type of triaxial dump truck loading was applied to the top of each energy harvester. In this paper, a general purpose finite element analysis program called ABAQUS was used and it was assumed that a harvester is installed in the cross section of a typical asphalt pavement structure. RESULTS : The maximum tensile stress of the polyurethane surface layer in the initial fatigue model occurred up to 0.035 MPa in the transverse direction when the truck tire load was loaded on the top of each harvester. The maximum tensile stresses were 0.025 MPa in the intermediate fatigue model and 0.013 MPa in the final fatigue model, which were 72% and 37% lower than that of the initial stage model, respectively. CONCLUSIONS : The main critical damage locations can be estimated between the base layer and the surface layer. If the crack propagates, bottom-up cracking from the base layer is the main cracking pattern where the tensile stress is higher than in other locations. It is also considered that the possibility of cracking in the top-down direction at the edge of energy harvester is more likely to occur because the material strength of the energy harvester is much higher and plays a role in the supporting points. In terms of long-term performance, all tensile stresses in the energy harvester and polyurethane layer are less than 1% of the maximum tensile strength and the possibility of fatigue damage was very low. Since the harvester is embedded in the surface layer of the polyurethane, which has higher tensile strength and toughness, it can assure a good, long-term performance.

• 전기학회논문지
• /
• 제65권10호
• /
• pp.1702-1705
• /
• 2016

We propose a novel hydrogen-reduced p-type amorphous silicon oxide buffer layer between $TiO_2$ antireflection layer and p-type silicon window layer of silicon thin film solar cells. This new buffer layer can protect underlying the $TiO_2$ by suppressing hydrogen plasma, which could be made by excluding $H_2$ gas introduction during plasma deposition. Amorphous silicon oxide thin film solar cells with employing the new buffer layer exhibited better conversion efficiency (8.10 %) compared with the standard cell (7.88 %) without the buffer layer. This new buffer layer can be processed in the same p-chamber with in-situ mode before depositing main p-type amorphous silicon oxide window layer. Comparing with state-of-the-art buffer layer of AZO/p-nc-SiOx:H, our new buffer layer can be processed with cost-effective, much simple process based on similar device performances.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.11.1-11.1
• /
• 2011

We have developed a simple synthetic method for fabricating a wafer-scale colloidal crystal film of 2D crystals in a 1D stack based on a combination of two simple processes : the self-assembly of polystyrene (PS) nanospheres at the water-air interface and the layer-by-layer (LbL) scooping transfer technique. The main advantage of this approach is that it allows excellent control of the thickness (at a layer level) of the crystals and the formation of a vertical crack-free layer over a wafer-scale (4 inch). We investigate the optical and morphological properties of the PhC multilayers fabricated using various mono-sized colloidal crystals (250, 300, 350, 420, 580, 720, and 850 nm), and mixed binary colloidal crystals (300/350 and 250/350 nm).