• 한국연소학회:학술대회논문집
• /
• 2003.05a
• /
• pp.51-55
• /
• 2003

In this research, authors tried to measure the shape of the nozzle throat of KL-3 engines, which is the main engine of KSR-III rocket, to find the increase of nozzle area caused by the thermal ablation. For the purpose, we invented an image-based method instead of the 3D pointer, which is actually inaccessible to such large scale engines. As a result, our equipment showed satisfactory accuracy and performance. Analysing the results of experiments, we find that the pattern of ablation is determined by the spray pattern and that the process of thermal ablation phenomena can be categorized in three regimes - the first regime that the shape of nozzle throat is maintained and ablation is negligible, the second regime that saw-tooth form is developed and ablation is accelerated, and the third regime that the saw-tooth form is already established and the growth of ablation rate is reduced. Also, we find that the ratio of area increase after 60 seconds combustion is +5.82% and conclude that this figure is acceptable and satisfactory.

• Journal of agricultural medicine and community health
• /
• v.1 no.1
• /
• pp.22-28
• /
• 1976

It has been well known that indiscriminative use of pesticides contaminates water resources and soil to break down the balance of natural ecosystem and brings acute when spray. In this country, 62,602 tons of pesticides were used in 1974 for agricultural purpose figuring 28.0 kg per hectare which showed 20% increasement every year since 1970. It is almost impossible to figure out incidence and mortality of acute pesticide poisoning exactly. However, a survey in 1974 reported that 33.5% of male and 32.7% of female who sprayed certain pesticides complained of several symptoms seemed to be due to acute pesticide poisoning. It also mentioned that the main cause inducing poisoning supposedly was dusting without protective armamation such as masks, booths, gloves and others in more than 60% of above cases. Pesticide poisoning through contamination of food or direct inhalation and contact. With the reason, the followings can be recommended to minimize or prevent pesticide hazards. 1. Strict legal control 2. Systematic education on the safe handling way of pesticides for the people who are to use them. 3. Remarkable warning at transportation and stocking of pesticides. 4. Obligatory attachment of explanation on the package about effect, safe handling method, and. emergency care at acute pesticide poisoning concerned.

• Journal of the Korean Home Economics Association
• /
• v.38 no.9
• /
• pp.119-130
• /
• 2000

The purpose of this study was to confirm the possibility of screen printing with Natural dyes. The coloring matter such as sappan wood was used in order to obtain the colorant powder through the processes of extraction, low pressure concentration and the spray dry. After the screen printing on silk and cotton fabrics with colorant, K/S value changes of color and color fastness were measured. The main resets were as follows : 1. The viscosity of printing thickeners of sappan wood powder was about 15,200 cps, and the highest K/S value of the fabrics printed with sappan wood was obtained at 90$\pm$2$\^{C}$ of steaming temperature and 80 minutes of steaming time. 2. For the fabrics printed with sampan wood, adding of urea was not effective, since the more the concentration of urea increased, the more K/S values decreased. 3. For the natural dyes printing, the more the concentration of colorants increased, the more K/S values increased. In general, the K/S values of the printed fabrics were higher when treated with mordants rather than without mordants. Specifically, the λmax sappan wood was 520∼570 nm, and the K/S value was highest when treated with Cu mordant and lowest when treated with Sn. 4. Generally, the color fastness was relatively fair.

• Culinary science and hospitality research
• /
• v.12 no.2 s.29
• /
• pp.151-167
• /
• 2006

This study shows the differences among residents’ consciousness for general infectious disease and sterilization mediated by vermin. We categorized both industry-related people who work in restaurants, hygiene service shops, whole sales, government organizations, PC shops, factories, department stores and non-industry-related people who work in schools, general offices into two groups for this study. The discovery of vermin held 86% of total exam cases. The vermin included mosquitoes, cockroaches, ants, flies, and so on. People thought these vermin might mediate bacteria infection to human. 80.3% of persons thought mite might exist in blankets, beds and couches. Among 66.6% of total experience of vermin damage, the main damage came from mosquitoes. Frequently used methods of prevention from vermin damage were as follows: "spray of effective chemicals", "install traps" and " report to a prevention company" in order. It indicated that people did not take special actions to repel vermin in spite of their knowing seriousness of damage. Furthermore, just half cases were executed regular sanitization.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.6
• /
• pp.104-109
• /
• 2004

On this paper study is concentrated on the breakup and atomization characteristics of spray formed by impinging jet injectors(like-doublet) used in liquid rocket engine(LRE). On the process of breakup and atomization, injection velocity and ambient gas pressure are the main parameters, so that these are used as variables that specify the experimental condition. Injection velocity varied from 3m/s to 30m/s and ambient gas pressure changed from 0.1MPa to 4.0MPa with nitrogen gas. As results, measured physical quantities decreased with increasing injection velocity and ambient gas pressure. But the decreasing ratios are different from those of the theory.

• Journal of ILASS-Korea
• /
• v.1 no.4
• /
• pp.54-62
• /
• 1996

Effect of reentrant type bowl geometry on combustion characteristics was investigated in a D.1.diesel engine. The main factor was the aspect ratio (Bowl Diameter/Bowl Depth) of bowl of combustion chamber, and the measured data include the cylinder pressure, engine performance and emissions of the engine using the 4 kinds of the combustion chamber. Experimental results indicate that the effect of dc/H and nozzle protrusion are relatively small and there exists an optimum dc/H according to the combustion conditions. It is also found that the smoke emission is quite sensitive the overall combustion time where the 90 percentage of the combustion heat is released. The smoke mission increases by shortening the 90% combustion time while it decreases by delaying the 90% combustion time.

• Journal of ILASS-Korea
• /
• v.12 no.2
• /
• pp.94-100
• /
• 2007

The liquid phase LPG injection (LPLi) system (the third generation technology) has been considered as one of the next generation fuel supply systems for LPG vehicles, since it has a very strong potential to accomplish the higher power, higher efficiency, and lower emission characteristics than the mixer type (the second generation technology) fuel supply system. To investigate the characteristics of LPG residue in liquid phase LPG injection system, various rubbers in LPG fuel system were reacted with LPG fuels during 3 months. The experimental results showed that the residue of a cover rubber in a fuel pump after test increased 10 times higher than that before test. Furthermore, the amount of sulfur, nitrogen species which are considered as main sources in deposit formation in the LPLi fuel injector were also found to be higher than that in original LPG fuel. And rubber properties of fuel pump cover were decreased after reaction test compared with those of the original rubber. Therefore, the rubber for fuel pump cover is not suitable for a proper material in LPLi fuel system. And these results can provide more information if a motor company shares the data of core rubber parts in field test LPLi vehicles.

• Journal of ILASS-Korea
• /
• v.16 no.4
• /
• pp.167-175
• /
• 2011

The HCCI engines have been known with high efficiency and low pollution and can be actualized as the new internal combustion engines. However, As for(??) the ignition and combustion depend strongly on the oxidation reaction of the fuel, so it is difficult to control auto-ignition timing and combustion duration. Purpose of this paper is creating the database for development of multi-dimensional simulation and investigating the influence of different molecular structure. In this research, the effect of n-heptane mole ratio in fuel (XnH) on the ignition delay from homogeneous charge compression ignition(HCCI) has been investigated experimentally. By varying the XnH, it was possible to ascertain whether or not XnH is the main resource of ignition delay. Additionally, the information on equivalence ratio for varying XnH was obtained. The tests were performed on a RCM (Rapid Compression Machine) fueled with n-heptane and iso-octane. The results showed that decreasing XnH (100, 30, 20, 10,0), the ignition delays of low temperature reaction (tL) and high temperature reaction (tH) is longer. And the temperature of reaction increases by about 30K. n-heptane partial equivalence ratio (fnH) affect on tL.and TL. When ${\phi}$nH was increased as a certain value, tL was decreased and TL was increased.

• Journal of ILASS-Korea
• /
• v.3 no.3
• /
• pp.23-32
• /
• 1998

The effect of reentrant type bowl geometry on combustion characteristics was investigated in a D.I. diesel engine. The main factor was the aspect ratio (Bowl Diameter / Bowl Depth) of bowl of combustion chamber, and the cylinder pressure, engine performance and emissions of the engine using the 4 kinds of the combustion chamber were meadured. Also, the combustion characteristics compared of the experimented and the calculated values which is used by the Hiroyasu's combustion model. The results are as follows; The effect of $d_c/H$ on ignition delay period are small. The smoke is corerelated to the heat release of the premixed and the diffusion combustion, i.g, the smoke decreased by decreasing the premixed combustion or increasing the diffusion combustion on cumulative heat release. The premixed combustion process has more effect than the diffusion combustion on smoke. The formal tendency of $d_c/H$ on engine performance has not appear.

• Molecular & Cellular Toxicology
• /
• v.3 no.1
• /
• pp.68-75
• /
• 2007

[ $\alpha$ ]-Terpinene has been known as a repellent against the mosquito Culex pipiens pallens Coquillett based on a human forearm bioassay. $\alpha$-Terpinene showed significantly greater repellency than a commercial formulation, N, N-diethyl-m-methylbenzamide (deet). In this study, skin and eye sensitivity of $\alpha$-terpinene (2%) was examined with bioassays using white New Zealand rabbits. There were somewhat gross and histological changes observed in these treatments. Eye irritancy assays examined gross changes to cornea, iris and conjuctiva, and histological changes to smear of ocular discharge and eye tissue. Treated rabbits were divided into two cohorts, a saline washed cohort (W) or a non-washed cohort (NW). Opacity of cornea and redness, chemosis and discharge of conjuctiva were observed in both cohorts, but disappeared within 4 and 10 days in W and NW, respectively. Main components of ocular discharges were fibrin, epithelial or epitheloid cells, lymphoid cells, erythrocytes and granulocytes. These abnormal cellular components disappeared within 4 days and 10 days in W and NW, respectively. No permanent histological differences were observed between the two cohorts. However, severe irritation was determined as 57.2 of I.I.O.I value on the first day after treatment. These findings indicate a spray-type solution containing 2% $\alpha$-terpinene may serve as an alternative mosquito repellent and further studies need to reduce the eye irritation with formulation changes.