• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.8
• /
• pp.104-109
• /
• 2020

Recently, vibration and noise have become an important issue in the auto industry. Asphalt vibration damping pads are used to reduce the noise and vibration of automobile bodies, and asphalt is used for many mass-produced parts due to its simple attachment process and low processing costs. In this study, the self-adhesion of asphalt pads using Joule heating was evaluated. To create the asphalt pad for the experiment, the asphalt pad was molded into a specific thickness by using SGACC material and rubber used in the vehicle body as a main component and a modified resin and filler. The SGACC material was 200 mm in length, 200 mm in width, and 0.7 mm in thickness. The asphalt pad was 200 mm in length, 100 mm in width, and 3 mm in thickness. The equipment was composed of a TR (Transformer) DC254kVA and a TC (Time controller) for a current of up to 20,000 A. The current for the Joule heating was set to 7.0 kA and a 3/1 cycle, for which the adhesion of the asphalt pad over the current flow time was evaluated.

• Textile Coloration and Finishing
• /
• v.30 no.3
• /
• pp.168-179
• /
• 2018

The modified surface of specialty carbon black(SCB) is one of the main technical factors for producing a uniform color and stable dispersion. In this work, the carboxylation or sulfonation process of SCB was used to improve the dispersive properties of hydrophilic solvents such as 1,6-hexanediol and propylene glycol monomethyl ether acetate(PGMEA). The results showed that the color strength of SCB DC2500G changed little with a range of 0.128~0.941(${\Delta}E$) compared to other SCB DC2500G material. In contrast, in the case of SCB EG410, there was a uniform color value with a range of 0.144~0.252(${\Delta}E$). Also, in our experiments, a modified SCB was confirmed by printing ink material as a melt coating paper. It may be possible that the SCB EG410 material can be advantageous as a gravure ink product. Finally, the modified SCB obtained from this research will have a large impact on the industry as a potential material for toners, paint, rubber, fillers, and other carbon black additives.

• The Research Journal of the Costume Culture
• /
• v.13 no.5 s.58
• /
• pp.763-776
• /
• 2005

The purpose of this study is to analyze the glamour image in contemporary women's fashion since 1990. The method of study is to analyze the documentary and fashion magazines about the glamour images. Most of all, glamour has been composed by connection of hollywood film industry and fashion. Glamourous body image showed sensual, threatening and vague body. Formative characteristics in fashion showed a tight silhouette, neglige, lace look, dress showing neck and shoulder, fur coat, stiletto, diamond, gold, big and thick jewelry, satin, velvet, lace, mink and fox fur, etc. Internal meaning was a fantasy, ideal, wealth, fame, hyper-feminity, vagueness, vulgarity, sexuality, mystery, professional, fatalness, aggressiveness and evil. Since 1990, the glamour images in fashion were as follows; First, the glamour with hyper-feminity showed a classical femme-fatal image as fearful existence with a power more than allure. Second, the glamour with vulgarity showed an exaggerated, cheap and popular kitsch image, which have intense colors, lavish surfaces and excessive sexual signs. Third, the glamour with classical sensuality showed a hi-glamour image of hollywood actresses being active from 1930 to 1950, which was expressed glittery dress, stole, diamond, fur wrap, hill, luxury dress. Fourth, the glamour with sexual perversion showed an erotic, vague and sexual drag image, and fetish costume. Fetishistic elements were rubber, PVC, stiletto, thick and high boots and corset and particularly, they were a main method of expression of glamour image. Fifth, the glamour with future image showed a mechanical and mysterious image and it was a conscious style by metallic, plastic and sleeky fabric. In conclusion, glamour fashion image is an ideal beauty type of women and will exist as a meaningful aesthetic sign in women's fashion.

• Journal of Biosystems Engineering
• /
• v.30 no.4 s.111
• /
• pp.220-228
• /
• 2005

This study was conducted to investigate the main factors that contain a rotating velocity ratio between wheel and conveyor belt, a tilt angle of conveyor belt and a rotating velocity of a dick cutter for mechanization of Chinese leek harvest. In the survey on the cultivation of Chinese leek, row spacing of 350 m and cutting height of 10 mm from the ground were set up for field tests. Test equipment was designed to cut, pick up and convey Chinese leek one row by one row. From the results of material tests, pick-up height of conveyor belt was set up at $60\~90m$ from the bottom, and the strain and stress at rupture of Chinese leek was 0.487 m/m and 0.01078 MPa. An elastic coefficient of the rubber (Neoprene) of conveyor belts was 1.1077 under the strain of 0.3 nym. from the results of field tests, the tilt angle of conveyor belt was the range of $25^{\circ}\~30^{\circ}$ under consideration far space of container, the velocity ratio between vehicle and conveying belt was 1 to 2.4~1.7 at 0.1~0.3 m/s of vehicle, and optimum rotating velocity of the disk cutter was 34.8 m/s or more under consideration for soil friction.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.17 no.1
• /
• pp.3702-3711
• /
• 1975

This study was originated to investigate the imparired parts of the mist and dust blowers and intended to analyze the causes of their failures by the use of the Weibull probability paper. By the use of the paper, the parts which were needed to change the design, the force of the urgency, the mean time between failures of the parts and the basic causes of the troubles could be predicted. The survey showed that the following parts got out of order: (A) flexible rubber hose, (B) blowing fan, (C) lead valve, (D) piston ring. (E) crank main bearing, (F) coil in magneto and (G) needle valve in carburettor. The analysis of the survey indicated that the parts G, C, E and D were belonged to "wear-out failure", and that the mean time between failures became shorter in order as indicated above. To insure longer lives of those parts, it would be necessary to change the design and the material and to upgrade operators mechanical technique of the mist and dust blower. The failure of the parts A, B and F was classified as "randomfailure", and they did not seem to be the "wear-out" at that time. The parts B and F was evaluated as "initial failure". Quality controls and operating tests by the producer. and the operational training for users should be strengthened so as to eliminate these failures. Were the failures only in the parts A, C, D, E, F and G, it could be said that the "reliability" of the mist and dust blower would fall to 10 percent in the second year, and 50 percent of the mist and dust blowers would fail in all parts A, C, D, E, F and G before the blower would have control insect and disease in 58.2 hectares. The use of the Weibull probability paper for analyzing failures of the mist and dust blowers was effective in that it analyzed failure in the relationship between strength of the parts and users actual circumstanoes.

• Journal of Soil and Groundwater Environment
• /
• v.8 no.2
• /
• pp.1-8
• /
• 2003

Two types of ground-water sampling techniques for CFCs (chlorofluorocarbons) analysis, the cold-welded copper tube method and flame-sealed borosilicate glass ampule method, were compared and evaluated. CFCs concentrations by the copper tube method showed a poor reproducibility among triplicates whereas those by the glass ampule method showed a good agreement and relative standard deviations of triplicates were less than 5%. The poor reproducibility of the copper tube method appears to be attributed to the incomplete sealing in connection between faucets of wellhead and the sampling apparatus. The copper tube method also showed higher CFCs concentrations than the glass ampule method, which is more pronounced for CFC-11 than for CFC-12. The plastic tubings and rubber gasket of faucets in case of the copper tube method possibly contaminated the samples with CFC-11 and CFC-12. The potential of CFCs contamination for the glass ampule method was eliminated by using stainless steel and Nylon only and by connecting the sampling equipment directly to the main discharge pipe of wellhead. The validity of the glass ampule method were also verified by detecting very low level of CFCs for the ground-water sample which is old enough to have negligible CFCs.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.2
• /
• pp.224-241
• /
• 2017

This study considered the change process for Western style shoes in Korea during the time of modernization in the 1920s to 1930s. Western style shoes were one of the items imported by foreigners since the Joseon Dynasty and had a significant impact on Korean dress code. It influence started to spread in the 1900s; however, few high level people wore Western shoes until the 1920s. The trend started to spread through newspaper advertisements and news articles after the mid 1920s. Western shoes such as modern girl and modern boy in the 1930s then entered into Korean culture. Korea under Japanese colonial rule was reorganized on a war footing in the latter half of the 1930s and the main materials for western shoes (cow leather, horse leather and sheepskin) were mobilized as materials for war production; subsequently, new materials using rubber were introduced. The representative material is 'Marine Leather (水産皮革)' and Sharkskin 'Gyoheok (鮫革)' and Whaleskin 'Gyeongpi (鯨皮).' Form is like the material has changed over time. This study also observed the flow of westernized Korean modern shoes as well as analyzed the details of materials and shape of western shoes by period. This represent basic materials to understand the legacy of western shoes in the age; in addition, systemic summary is organized by each kind, shape and materials for each style of western shoes.

• Elastomers and Composites
• /
• v.15 no.1
• /
• pp.3-9
• /
• 1980

The oxygen permeability and it's proofness of te various commercial polymer films have been investigated at the constant pressure and temperature. Oxygen proofness, the reciprocals of the oxygen permeability for the various samples, were determined by means of a coulometric oxygen permeability tester. The testing of sample films was performed at constant temperature $(23{\pm}1^{\circ}C)$ under 1 atm. for 24 hours. The order of the relative proofness observed are as follows; oriented Nylon (O. Nylon)> oriented Polyester (O. PET)>nonoriented Nylon (N. Nylon)>nonoriented Polyester (N.PET)> rigid Polyvinyl chloride (Rigid PVC)>semirigid Polyvinyl chloride (Semirigid PVC)> oriented Polypropylene (O. PP)>plasticized Polyvinyl chloride (P. PVC)> casted Polypropylene (C. PP)> low density Polyethylene (LDPE)>high density Polyethylene (HDPE, Inflation)> high density-polyethylene (HDPE, T-die) The oxygen proofness of the films was increased with the polarity cf polymer, the film thickness and mechanical orientation and decreased with the addition of plasticizer in PVC. For the use of wrapping materials, one film with the polar property in the main chain of the polymer molecule and the others with nonpolar property in it are laminated for the protection from oxygen and moisture.

• Elastomers and Composites
• /
• v.44 no.4
• /
• pp.416-422
• /
• 2009

4-(6-bromohexyloxy)benzoic acid was synthesized from benzyl 4-Hydroxybenzoate and 1,6-dibromohexane. It was reacted with hydroquinone to obtain a new mesogenic ester having an bromine group. One kind of new photoresponsive coumarin compound was prepared by the reaction of mesogenic ester with coumarin sensitive to the ultraviolet. Structures of the compound were identified by FT-IR and $^1H$-NMR spectroscopies. Their phase transition temperatures and thermal stability were also investigated by differential scanning calorimetry (DSC), polarized optical microscopy (POM) and x-ray diffraction analysis. From optical polarizing microscopy, the prepared compound was found to show enantiotropic liquid crystallinity with smectic and nematic textures.

• Journal of the Korean Society of Costume
• /
• v.64 no.8
• /
• pp.83-96
• /
• 2014

This study aims to analyze the design of current nurse uniforms, investigate the state of nurse uniforms, and uniform design preferences in order to ultimately develop functional nurse uniform, which satisfy their needs. First, observing photos of nurses' campaign on wearing a badge showed that opening of top uniform almost always incorporated buttons, and sleeves were mostly set-in half sleeves while collars tended to be mandarin collars. The colors were mostly white for both top and bottom, while the top showed a bit more variety in colors. White tops often incorporated hospital logos on them. Second, in terms of the nurse uniform distribution, each nurse is given one top and one bottom per year. In addition, either a cardigan or a jacket on top of the regular summer uniform constitutes the winter uniform, whereas the availability of cardigans differed by hospitals. Third, the main source of contamination of uniforms was blood, and the level of satisfaction was all low in terms of the design, function, and material of the uniform, calling for the enhancement and development of new uniforms. Design preferences were two-piece with pants, color preferences were blue and pink, and pattern preferences were hospital logo, stripes, and check patterns in the listed order of preference. Complaints were usually made on the contamination of front pocket of the top, lack of sufficient pockets for storage, and tightness of the sleeves. Some preferences on finishing were the princess seams, mandarin collar, set-in half sleeves, and button closing on top. The preferred belt was a mixed form of straight-lined belt and rubber belt, and straight lined hem and spandex blended fabrics were favored for the clothing.