• Title/Summary/Keyword: Main Link

Search Result 489, Processing Time 0.025 seconds

The Reliable Multicast Transport Protocol over Wireless Convergence Networks using a Retransmission Agent (재전송 Agent를 이용한 유무선 융합망에서의 신뢰성 있는 멀티캐스트 전송 방식)

  • Youm, Sungkwan;Yu, Sunjin
    • Journal of the Korea Convergence Society
    • /
    • v.7 no.4
    • /
    • pp.25-32
    • /
    • 2016
  • When using reliable multicast protocol over air links, the multicast packets lost in the air link cause the initiation of retransmission request packets and the implosion of retransmission packets, which deteriorate multicast session performance. This paper proposes on the efficient reliable multicast mechanism in wireless networks utilizing the Agents. In this paper we show the design of a retransmission agent which improves the performance of reliable multicast sessions in wireless network. The main idea is to cache reliable multicast packets at the base station and perform local retransmissions across the wireless link. MATLAB has been used to simulate and to get performance results for signaling overhead and processing delay through the comparison of the proposed agent model to the Multicast File Transfer Protocol. It has been proven from the simulation results that the proxy module make pass trials shorter in Multicast File Transfer Protocol.

Improving The Performance of Scalable Reliable Multicast over Wired and Wireless Networks using a Retransmission Function (재전송 기능을 이용한 유무선 통합망에서의 Scalable Reliable Multicast 성능 개선)

  • Koh, Wan-Ki
    • The Journal of Korea Institute of Information, Electronics, and Communication Technology
    • /
    • v.9 no.4
    • /
    • pp.313-322
    • /
    • 2016
  • This paper presents a method to improve the performance of Scalable Multicast Protocol deployed in wired and wireless network by adding retransmission function on base stations. When using Scalable Multicast Protocol over wireless and wired networks, packet drops on the wireless link produce the initiation of retransmission request packets and the implosion of retransmission packets, which deteriorate the multicast session performance. The efficient reliable multicast mechanism in wireless networks utilizing the retransmission function on the base station is addressed in this paper. We explain the design of a retransmission function which improves the performance of Scalable Multicast Protocol sessions in wireless and wirednetwork. The main idea is to cache Scalable Multicast Protocol packets at the base station and perform local retransmissions across the wireless link. ARENA has been used to simulate and to get performance for reducing signaling overhead and processing delay through the comparison of the proposed function to the Scalable Multicast Protocol.

Fast Auxiliary Channel Design for Display Port (디스플레이 포트를 위한 고속 보조 채널 설계)

  • Jin, Hyun-Bae;Moon, Yong-Hwan;Jang, Ji-Hoon;Kim, Tae-Ho;Song, Byung-Cheol;Kang, Jin-Ku
    • Journal of IKEEE
    • /
    • v.15 no.2
    • /
    • pp.113-121
    • /
    • 2011
  • This paper presents the design of a fast auxiliary channel bus for DisplayPort 1.2 interface. The fast auxiliary channel supports Manchester transactions at 1Mbps and fast auxiliary transactions at 780Mbps. The Manchester transaction is used for managing the main link and auxiliary channel and the fast auxiliary transaction is for data transfer via the auxiliary channel. Simplified serial bus architecture is proposed to be implemented in fast auxiliary channel. The fast auxiliary channel transmitter and receiver are implemented with 7,648 LUTs and 6,020 slice register synthesized in Xilinx Vertex4 FPGA and can be operated at 72MHz to support 720Mbps.

IoT Enabled Smart Emergency LED Exit Sign controller Design using Arduino

  • Jung, Joonseok;Kwon, Jongman;Mfitumukiza, Joseph;Jung, Soonho;Lee, Minwoo;Cha, Jaesang
    • International journal of advanced smart convergence
    • /
    • v.6 no.1
    • /
    • pp.76-81
    • /
    • 2017
  • This paper presents a low cost and flexible IoT enabled smart LED controller using Arduino that is used for emergency exit signs. The Internet of Things (IoT) is become a global network that put together physical objects using network communications for the purpose of inter-communication of devices, access information on internet, interaction with users as well as permanent connected environment. A crucial point in this paper, is underlined on the potential key points of applying the Arduino platform as low cost, easy to use microcontroller with combination of various sensors applied in IoT technology to facilitate and establishment of intelligent products. To demonstrate the feasibility and effectiveness of the system, devices such as LED strip, combination of various sensors, Arduino, power plug and ZigBee module have been integrated to setup smart emergency exit sign system. The general concept of the proposed system design discussed in this paper is all about the combination of various sensor such as smoke detector sensor, humidity, temperature sensor, glass break sensors as well as camera sensor that are connected to the main controller (Arduino) for the purpose of communicating with LED exit signs displayer and dedicated PC monitors from integrated system monitoring (controller room) through gateway devices using Zig bee module. A critical appraisal of the approach in the area concludes the paper.

Research on a handwritten character recognition algorithm based on an extended nonlinear kernel residual network

  • Rao, Zheheng;Zeng, Chunyan;Wu, Minghu;Wang, Zhifeng;Zhao, Nan;Liu, Min;Wan, Xiangkui
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.12 no.1
    • /
    • pp.413-435
    • /
    • 2018
  • Although the accuracy of handwritten character recognition based on deep networks has been shown to be superior to that of the traditional method, the use of an overly deep network significantly increases time consumption during parameter training. For this reason, this paper took the training time and recognition accuracy into consideration and proposed a novel handwritten character recognition algorithm with newly designed network structure, which is based on an extended nonlinear kernel residual network. This network is a non-extremely deep network, and its main design is as follows:(1) Design of an unsupervised apriori algorithm for intra-class clustering, making the subsequent network training more pertinent; (2) presentation of an intermediate convolution model with a pre-processed width level of 2;(3) presentation of a composite residual structure that designs a multi-level quick link; and (4) addition of a Dropout layer after the parameter optimization. The algorithm shows superior results on MNIST and SVHN dataset, which are two character benchmark recognition datasets, and achieves better recognition accuracy and higher recognition efficiency than other deep structures with the same number of layers.

Implementation of IMS Core SIP Gateway based on Embedded (임베디드 기반의 IMS 코아 SIP 게이트웨이 구현)

  • Yoo, Seung-Sun;Kim, Sam-Taek
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.14 no.5
    • /
    • pp.209-214
    • /
    • 2014
  • IMS(IP Multi-Media Subsystem) is in the limelight as the Integrated wire and wireless Systems because of a sudden increase of smart mobile devices and growth of multimedia additional services such as IPTV. The structure of IMS is designed as a session control layer to provide various multimedia summative service using SIP based on IP communication network in order to carry out set-up, change and release by NGN of course, the existing voice services. But now It is broadly substituting in the IPTV, wire phone company and it is substituted in internet platform base on the soft-switch in currently. Especially, in currently, 4G LTE in a mobile communication company is rapidly growing in market. Therefore, in this study, we had designed and developed to the main prosser that can admit to 1000 user over and SIP gateway which can link the IMS Core that can link SIP Device which adopt the standard protocol on the SIP and to provide variable multimedia services.

Colorless Amplified WDM-PON Employing Broadband Light Source Seeded Optical Sources and Channel-by-Channel Dispersion Compensators for >100 km Reach

  • Kang, Byoung-Wook;Lee, Kwanil;Lee, Sang Bae;Kim, Chul Han
    • Journal of the Optical Society of Korea
    • /
    • v.18 no.5
    • /
    • pp.436-441
    • /
    • 2014
  • We have demonstrated an amplified wavelength-division multiplexed (WDM) passive optical network (PON) by using broadband light source (BLS) seeded optical sources and chirped fiber Bragg gratings (FBGs) based dispersion compensators. Chirped FBGs located at central office (CO) were fabricated and used as channel-by-channel dispersion compensators in order to mitigate the dispersion-induced distortion of both downstream and upstream signals. Owing to a low insertion loss of chirped FBG based dispersion compensator, the optical signal-to-noise ratio (OSNR) of the downstream signal could be improved to be ~28 dB. Thus, we re-confirmed that an error-free transmission of 1.25 Gb/s signals over a 100 km single-mode fiber (SMF) link could be achieved with a proposed amplified WDM-PON architecture. We have also evaluated the impact of various noises on the system's performance, and found that the low OSNR of the downstream signal would be a main limiting factor on the maximum reach of the proposed amplified WDM-PON architecture. From the measured ~13 dB improvement in OSNR of the downstream signal compared to our previously-proposed dispersion compensating module based scheme, we believe that the proposed architecture can accommodate a reach of longer than 100 km SMF link easily.

'Look at the Alcohol If You Want to Know the Country': Drinking Vessels as a Cultural Marker of Medieval Korea

  • KIM HAN, IN-SUNG
    • Acta Via Serica
    • /
    • v.4 no.2
    • /
    • pp.29-59
    • /
    • 2019
  • As 'a total social fact,' drinks and drinking may serve as a lens through which we can view a distant society. Although not frequently discussed, drinking vessels serve the same function for accessing a past world hidden or forgotten behind written records. The present article is an art history attempt to seek a cultural link between liquor vessels used in medieval Korea and the political and social change of the period. The Goryeo period (918-1392) saw an unprecedented abundance of drinking vessels in various forms and decorations. Goryeo artisans and craftsmen produced ewers, pitchers, flasks, bottles, and others in addition to the pre-existing shapes of vessels mainly consisting of jars and bowls. I argue that this sudden burst of creativity during the Goryeo period was closely related to Goryeo's constant and diverse contacts with foreign powers. Their zone of international connections was not confined to the Chinese world, as we have commonly presumed. Even before the Mongol intervention, Goryeo was in contact with regions beyond East Asia through the northern nomadic states. Khitan Liao was recorded as having worked as a kind of international intermediary to link the Chinese and Islamic worlds. This medieval global culture became a norm in Goryeo society when it became an important part of the Mongol Empire. These nomadic powers brought global trends to Goryeo, and foreign drinks were among them; kumis, araq, and grape wines are just three cases of them discussed in this article. The change of alcoholic drinks led to, or was accompanied by, a new range of drinking vessels. Three types of ewers, familiar to East Asian consumers but foreign in their origin, are discussed in the main text to highlight such social change. Three more cases of drinking cups are also presented. The article shows that medieval Korean society was far more open to international art and culture than our usual understanding, and in their drinking vessels, Goryeo culture embraced global trends reaching China, the Islamic world and Europe.

The Achievements and Problems of Computerization of Korean Medical Classics, Donguibogam - Focusing on the mobile Application 'The Donguibogam in My Hand' - (동의보감 전산화 성과와 한의학 고문헌 전산화의 과제 - 모바일 어플리케이션 '내손안에 동의보감'을 중심으로 -)

  • Oh, Junho
    • The Journal of Korean Medical History
    • /
    • v.28 no.1
    • /
    • pp.111-119
    • /
    • 2015
  • Objectives : The Dongui Bogam in My Hand', which is an output of computerizing Donguibogam (Principles and Practice of Eastern Medicine), is an interim outcome of the research project led by the Korea Institute of Oriental Medicine. This study examined the process in which Donguibogam, a record in Chinese and a classic of Oriental medicine, expanded into a modern content. Methods : This study will classify the modernization of Donguibogam into three 'contents' that form Donguibogam, 'container' that will hold the contents, and 'community' that is the consumer of Donguibogam. Towards the end, this study will sketch out the status of computerizing Chinese records in Korea, and point out the reality faced by computerization of ancient documents on Oriental medicine as well as the direction for the future. Results : 'The Dongui Bogam in My Hand' has been downloaded more than 10,000 times for 4 months since it releases in August 2014, and is used for at least 6,000 times on average every month. This achievement can be due to the two following reasons. First, the application contains high-quality contents such as the original text of Donguibogam as well as Korean and English translations. Second, it satisfied the needs of Donguibogam users with (1) the Browse function that well displays the table of contents, (2) the Search function that separates the title from the main text, and (3) the Personalization function designed to link and share relevant knowledge. Conclusions : Computerization of Chinese records was triggered by the request of the academia, but it was accelerated after being selected as a public laboring project to overcome the IMF crisis. However, computerization of ancient documents is not a simple task but a field of study to modernize classical knowledge. The success or failure of computerization of Chinese records is determined by whether high-quality modern 'contents' are secured, whether the 'container' design adequately implements the search, browse and link functions, and how well it fulfills the needs of the consumer 'community'.

A Study on Nursing Diagnoses and Nursing Intervention Classification -focused on Home Health Care Clients- (간호진단과 중재분류에 관한 조사연구 -가정 간호 대상자를 중심으로-)

  • 김조자;최애규;김기란;송희영
    • Journal of Korean Academy of Nursing
    • /
    • v.29 no.1
    • /
    • pp.72-83
    • /
    • 1999
  • The purpose of this study was to classify, from collected home health care records data, nursing diagnoses according to the NANDA system and nursing interventions according to the NIC system, and to link nursing interventions to nursing diagnoses. For this study, 101 home health care records of clients seen between September, 1994 and November, 1996 at Yonsei Medical Center, Seoul, were analyzed. The results of this study are summarized as follows : 1. The most frequent nursing diagnoses were ‘Risk for infection’ and ‘Altered nutrition : Less than body requirements’, then ‘Impaired skin intergrity’ and ‘Ineffective airway clearance’ in the Exchange pattern of NANDA nine human response patterns. 2. The most frequent nursing interventions were the interventions in the Physiological : Complex domain, there were 690(50.7%) interventions among a total 1347 interventions. This results corresponds to Yom, Young Hee(1995)’s research, both Korean and U.S. nurses used the interventions in the Physiological : Complex do main most often on a daily basis. And respiratory nursing interventions were most frequent because 32.7% of the subjects were respiratory patients. 3. The next step was to link the nursing interventions to nursing diagnoses. The most frequent nursing diagnosis was ‘Risk for infection’ and 19 interventions for ‘Risk for infection’ were used 267 times. Then 14 interventions for ‘Impaired skin integrity’ were used 258 times, 12 interventions for ‘Ineffrective airway clearance’ were used 193 times, 12 interventions for ‘Altered nutrition : Less than body requirements’ were used 122 times, 10 interventions for ‘Activity intolerance’ were used 75 times, and 11 interventions for ‘Knowledge deficit’ were used 52 times. 4. The use of standardized classification in the areas of nursing diagnoses and nursing interventions facilitates clinical decision making and prompt nursing activity, and so enhances the effectiveness of nursing care.

  • PDF