• Journal of Information Processing Systems
• /
• 제15권5호
• /
• pp.1156-1170
• /
• 2019

In recent years, the problem of data drifted of the smart grid due to manual operation has been widely studied by researchers in the related domain areas. It has become an important research topic to effectively and reliably find the reasonable data needed in the Supervisory Control and Data Acquisition (SCADA) system has become an important research topic. This paper analyzes the data composition of the smart grid, and explains the power model in two smart grid applications, followed by an analysis on the application of each parameter in density-based spatial clustering of applications with noise (DBSCAN) algorithm. Then a comparison is carried out for the processing effects of the boxplot method, probability weight analysis method and DBSCAN clustering algorithm on the big data driven power grid. According to the comparison results, the performance of the DBSCAN algorithm outperforming other methods in processing effect. The experimental verification shows that the DBSCAN clustering algorithm can effectively screen the power grid data, thereby significantly improving the accuracy and reliability of the calculation result of the main grid's theoretical line loss.

• 한국산업융합학회 논문집
• /
• 제23권4_1호
• /
• pp.559-567
• /
• 2020

As the renewable energy market grows, grid-connected inverters have been improving and expanding in several fields in recent years because energy conversion devices are the main components of solar systems. In this paper, a high-precision new grid-connected three-phase inverter system is proposed. The proposed system consists of a main inverter, a sub inverter and a transformer. The main inverter operates at a low switching frequency and high power and transmits power to the grid. A sub-inverter connected in series with the transmission line through a matching transformer operates at lower power than the main inverter to provide input values to the transformer. The transformer acts as a power supply according to the voltage compensation value. This study is based on the principle of operation of the UPFC(Unified Power Flow Controller) structure used to regulate power flow in AC transmission lines. The grid-connected inverter system proposed in this paper is implemented with high precision and high resolution. The proposed system was verified through its ability to enhance and ensure the safety of the proposed system through simulation and experiment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.145-146
• /
• 2011

A micro-grid (MG) is usually interconnected to the main grid through the dedicated line. Immediately after the removal of the grid supply, the MG should be disconnected and remain disconnected until the main grid is re-energized. It should detect islanding condition as soon as it happens to adjust the setting of the protection relays in the MG. This paper proposes an islanding detection algorithm for the MG based on the active and reactive power delivered to the dedicated line in the time domain. The performance of the proposed algorithm is verified under islanding conditions and fault conditions using the PSCAD/EMTDC simulator. The results indicate that the proposed algorithm can discriminate the islanding conditions from the various fault conditions.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2006년도 학술발표회 논문집
• /
• pp.579-586
• /
• 2006

The paper introduces the grid technology currently applied intensively to civil engineering around the world. Basic concepts of grid technology and its application areas are summarized. Some of available grid systems in foreign countries and also in Korea are introduced and their main goals and functions aye compared. Through reviewing the KOCED program currently under development in Korea, the future of the grid technology in civil engineering is groped.

• 한국음향학회지
• /
• 제14권1호
• /
• pp.115-122
• /
• 1995

균일한 소자 (안테나 또는 감지기) 간격으로 계수치를 체감하는 것보다 균일한 계수치로 소자의 간격을 체감하는 것이 실용적이며, 직사각형 어레이에서는, 삼각형 격자 구조가 직사각형 격자구조 보다 소자 수를 줄이는데 더 경제적이다. 접지판 위에 설치된 삼각형 격자 구조를 가진 직사각형 위상어레이의 성능을 향상시키기 위하여 소자간격 체감 방법을 제안하였다. 소자간격 체감이 주빔(main beam)의 폭과 측면로브(sidelobe)의 높이에 미치는 영향을 논의하였다. 제안된 방법을 사용한 결과 측면로브의 성능이 향상되었으나 주빔폭은 약간 넓어지는 것이 밝혀졌다.

• Journal of Power Electronics
• /
• 제13권2호
• /
• pp.313-321
• /
• 2013

This paper describes the operation analysis results of a communication-based DC micro-grid using a hardware simulator developed in the lab. The developed hardware simulator is composed of distributed generation devices such as wind power, photovoltaic power and fuel cells, and energy storage devices such as super-capacitors and batteries. Whole system monitoring and control was implemented using a personal computer. The power management scheme was implemented in a main controller based on a TMS320F28335 chip. The main controller is connected with the local controller in each of the distributed generator and energy storage devices through the communication link based on a CAN or an IEC61850. The operation analysis results using the developed hardware simulator confirm the ability of the DC micro-grid to supply the electric power to end users.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.213-215
• /
• 2002

This paper presents grid connected photovoltaic inverter system using a new Zero-Current-Transition(ZCT) technique. The main switches of the proposed grid connected inverter are turned off under the zero current condition by operating the auxiliary circuit and also all semiconductor devices, switches and diodes, are applied to low rated voltage regardless of the load condition. In additionally, the proposed ZCT scheme has advantages, which are without the additional current stresses and the conduction losses on the main switches during the resonance period of the auxiliary circuit. The simulation was performed to verify the validity of the proposed grid connected photovoltaic ZCT inverter system.

• 대한토목학회논문집
• /
• 제34권6호
• /
• pp.1667-1676
• /
• 2014

강합성 바닥판은 두 방향의 휨 강성이 다르기 때문에 직교이방성의 성질을 가진다. 강합성 바닥판의 휨 강성비는 활하중 모멘트에 영향을 미친다. 비충전 강합성 바닥판의 휨 강성비는 메인 베아링 바 간격과 직접적인 관계를 가지고 있어 메인 베아링 바 간격과 형상비 영향이 고려된 하중분배 계수식에 대한 연구가 필요한 것으로 판단된다. 본 연구에서는 휨 강성비를 고려하는 AASHTO LRFD Bridge Design Specification에 의한 비충전 강합성 바닥판의 활하중 모멘트를 평가하고 비충전 강합성 바닥판의 하중분배 계수식을 제안하고자 한다.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 2003년도 춘계학술대회
• /
• pp.3-7
• /
• 2003

For high performance Grid environments, an efficient GIS(Grid Information Service is required In the Metacomputing Directory Service(MDS) of the Glogus middleware, the Lightweight Directory Access Protocol(LDAP), which is a distributed directory service protocol, is used. The LDAP GIS differs from general purpose LDAP directories in that most of the LDAP operations are write in Grid environments. To get an efficient design of the GIS, it is thus required to analyze the performance of the LDAP system in the context of Grid environments. This paper presents the result of a performance analysis of LDAP systems. The main objective of the evaluation is to see the performance scalability of the LDAP system in the Grid environment where the write operations prevails. Based on these results, we suggest directions of an efficient LDAP-based GIS for a high performance Grid.

• Journal of Electrical Engineering and Technology
• /
• 제9권6호
• /
• pp.1822-1831
• /
• 2014

Micro-grid is connected to the main power grid through a static switch. One of the critical issues in micro-grids is protection which must disconnect the micro-grid from the network in short-circuit contingencies. Protective methods of micro-grid mainly follow the model of distribution system protection. This protection scheme suffers from improper operation due to the presence of single-phase loads, imbalance of three-phase loads and occurrence of power swings in micro-grid. In this paper, a new method which prevents from improper performance of static micro-grid protection is proposed. This method works based on artificial neural network (ANN) and able to differentiate short circuit from power swings by measuring impedance and the rate of impedance variations in PCC bus. This new technique provides a protective system with higher reliability.