• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.9
• /
• pp.1348-1354
• /
• 2003

The feeding value of high-oil corn fed to Taiwan Country (TC) chicken was examined by measuring apparent metabolizable energy (AME), growth performance, sexual maturity, carcass characteristics, and plasma pigmentation. In a completely randomized design, 870 sex-intermingled one-wk-old chicks were assigned to one of 30 floor pens, 29 birds per pen, and each pen randomly assigned to one of five dietary treatments. The experiment was ended when birds were 16 wk of age. The five dietary treatments varied in main fat sources, which were corn oil (CO), high-oil corn (HOC), lard (LRD), whole soybean (WSB) and yellow corn (YC), respectively. All the diets were formulated isonitrogenously, isocalorically, and of equal lysine and methionine contents except YC, in which equal amounts of YC replaced HOC. The results indicated that feed conversion in HOC was 8% higher (p<0.05) than YC whereas the calculated AME of HOC was only 3.5% to 4.0% higher than that of YC. No significant differences were observed in body weight, body weight gain, feed consumption, feed conversion ratio and ME efficiency for body weight gain among CO, HOC, LRD, and WSB. No significant differences existed in both skin and muscle pigmentation of breast among the five dietary treatments. No significance differences existed in plasma carotenoid content measured at various ages among the five dietary treatments except that birds fed with HOC had less (p<0.05) plasma carotenoids at 16 wk-old. The results indicate that if the price of high-oil corn is no more than 1.05 times that of yellow corn, the dietary cost per kg of body weight gain for TC chickens fed diets containing high-oil corn will be less, although their body weight may be lighter compared to chickens fed diets formulated with other fat sources.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.5
• /
• pp.2095-2100
• /
• 2014

Objective: Most patients with advanced breast cancer experience resistance to endocrine treatment and eventual disease progression. This meta-analysis was designed to compare the efficacy and tolerability of fulvestrant 250mg with anastrozole 1mg in postmenopausal women with advanced breast cancer. Methods: Electronic literature databases (Cochrane Library, Medline, and Embase) were searched for randomized controlled trials (RCTs) published prior to August 2013. Only RCTs that compared fulvestrant 250mg to anastrozole 1mg in postmenopausal women with advanced breast cancer were selected. The main outcomes were time to treatment failure (TTF), time to progression (TTP), duration of response (DOR), clinical benefit rate, and tolerability. Results: Four RCTs covering 1,226 patients (fulvestrant, n=621; anastrozole, n=605) were included in the meta-analysis. Fulvestrant increased the DOR compared to anastrozole (HR =1.31, 95% confidence interval [CI] 1.13-1.51). There was no statistically significant difference between fulvestrant and anastrozole in terms of TTF (HR=1.02, 95%CI 0.89-1.17), complete response (RR=1.79, 95%CI, 0.93-3.43), and partial response (RR=0.91, 95%CI 0.69-1.21). As for safety, there was no statistical significance between the two groups for common adverse events. Conclusion: Fulvestrant 250mg is as effective and well-tolerated as anastrozole 1mg treatment for advanced breast cancer in postmenopausal women whose disease progressed after prior endocrine treatment. Thus, fulvestrant may serve as a reasonable alternative to anastrozole when resistance is experienced in breast cancer cases.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.5
• /
• pp.3045-3050
• /
• 2013

Purpose: Hepatic resection is arguably the preferred treatment for huge hepatocellular carcinoma (H-HCC). Estimating the remnant liver volume is therefore essential. This study aimed to evaluate the feasibility of using computer-assisted volumetric analysis for this purpose. Methods: The study involved 40 patients with H-HCC. Laboratory examinations were conducted, and a contrast CT-scan revealed that 30 cases out of the participating 40 had single-lesion tumors. The remaining 10 had less than three satellite tumors. With the consensus of the team, two physicians conducted computer-assisted 3D segmentation of the liver, tumor, and vessels in each case. Volume was automatically computed from each segmented/labeled anatomical field. To estimate the resection volume, virtual lobectomy was applied to the main tumor. A margin greater than 1 cm was applied to the satellite tumors. Resectability was predicted by computing a ratio of functional liver resection (R) as (Vresected-Vtumor)/(Vtotal-Vtumor) x 100%, applying a threshold of 50% and 60% for cirrhotic and non-cirrhotic cases, respectively. This estimation was then compared with surgical findings. Results: Out of the 22 patients who had undergone hepatectomies, only one had an R that exceeded the threshold. Among the remaining 18 patients with non-resectable H-HCC, 12 had Rs that exceeded the specified ratio and the remaining 6 had Rs that were < 50%. Four of the patients who had Rs less than 50% underwent incomplete surgery due to operative findings of more extensive satellite tumors, vascular invasion, or metastasis. The other two cases did not undergo surgery because of the high risk involved in removing the tumor. Overall, the ratio of functional liver resection for estimating resectability correlated well with the other surgical findings. Conclusion: Efficient pre-operative resectability assessment of H-HCC using computer-assisted volumetric analysis is feasible.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.14
• /
• pp.5861-5865
• /
• 2014

High risk forms of the human papilloma virus (HPV) are generally accepted as necessary causative agents for cervical cancer. Recently, a possible relation between HPV and oral squamous cell carcinoma (OSCC) has also been noticed. The present study was conducted to investigate the prevalence of HPV infection in OSCCs in Wuhan city. DNA samples were collected from fresh tissues in 200 patients with OSCC and 68 normal controls. The polymerase chain reaction and direct sequencing were used to identify the HPV types in the samples. The prevalence of HPV of all types in the OSCC group was higher than in the control group (55/200 vs 2/68, OR=11.5, 95% CI=2.6-50.2). HPV16 and HPV18 were the main types detected, with HPV6 was the only low-risk type identified. High-risk HPV types HPV16 and HPV18 are prevalent in OSCC patients and may participate in the development of OSCC with traditional risk factors, tobacco and alcohol, possibly exerting synergistic effects. The results of multinomial logistic regression showed that those who smoked, consumed alcohol and with HPV infection have the highest risk of developing oral cancer (OR=13.3, 95% CI=3.1-56.8). Adjusted for age, smoking and alcohol use, HPV infection was independently associated with oral squamous cell carcinoma.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.15 no.3
• /
• pp.166-175
• /
• 2005

Health effects associated with metal working fluid (MWF) exposures include dermatitis, respiratory disease, hypersensitive pneumonitis, and asthma. Frequently, occupational exposures to MWFs are controlled by ventilating an enclosure with an air cleaning unit that includes a fan preceded by various kinds of filtration. There are several kinds of air cleaning units used in machining centers. But the associated troubles have hindered from efficiently using these devices. The main problem is the relatively short period of filter replacement. The reason is that the air cleaning units usually do not have the de-oiling systems, thus leading the earlier clogging of filters and reducing the flow rate of hood. Thus, the first stage of study was conducted to overcome this problem by developing the new oil mist collector equipped with the easy de-oiling system. The principle of de-oiling is that the centrifugal force generated by spinning the drum covered by filter fabric separates oils from the filter fabric. It would be very similar to the spin-dry laundry. By adopting this de-oiling technique, the problems associated with the conventional oil mist collectors could be solved. Several tests/analyses were performed to make the lab-scale oil mist collector. The collection efficiencies and the de-oiling efficiencies of commercially available filter fabrics were tested. Subsequently, the endurance test were conducted by observing SEM photos of filter fabrics and measuring tensile strength/expansion coefficient after spinning the filter drum for 20 minutes at the different rotation speeds. By doing these experiments, the most appropriate filter fabric and rotation speed/duration were selected. Finally, the new oil mist collector was designed. In the near future, this device must be tested in the real machining center.

• Plant Biotechnology Reports
• /
• v.5 no.3
• /
• pp.217-224
• /
• 2011

Non-heading Chinese cabbage (Brassica rapa L. ssp. chinensis) is a popular vegetable in Asian countries. The diamondback moth (DBM), Plutella xylostella (L.), an insect with worldwide distribution, is a main pest of Brassicaceae crops and causes enormous crop losses. Transfer of the anti-insect gene into the plant genome by transgenic technology and subsequent breeding of insect-resistant varieties will be an effective approach to reducing the damage caused by this pest. We have produced transgenic non-heading Chinese cabbage plants expressing the potato proteinase inhibitor II gene (pinII) and tested the pest resistance of these transgenic plants. Non-heading Chinese cabbages grown for 45 days on which buds had formed were used as experimental materials for Agrobacterium-mediated vacuum infiltration transformation. Forty-one resistant plants were selected from 1166 g of seed harvested from the infiltrated plants based on the resistance of the young seedlings to the herbicide Basta. The transgenic traits were further confirmed by the Chlorophenol red test, PCR, and genomic Southern blotting. The results showed that the bar and pinII genes were co-integrated into the resistant plant genome. A bioassay of insect resistance in the second generation of individual lines of the transgenic plants showed that DBM larvae fed on transgenic leaves were severely stunted and had a higher mortality than those fed on the wild-type leaves.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.17 no.1
• /
• pp.3702-3711
• /
• 1975

This study was originated to investigate the imparired parts of the mist and dust blowers and intended to analyze the causes of their failures by the use of the Weibull probability paper. By the use of the paper, the parts which were needed to change the design, the force of the urgency, the mean time between failures of the parts and the basic causes of the troubles could be predicted. The survey showed that the following parts got out of order: (A) flexible rubber hose, (B) blowing fan, (C) lead valve, (D) piston ring. (E) crank main bearing, (F) coil in magneto and (G) needle valve in carburettor. The analysis of the survey indicated that the parts G, C, E and D were belonged to "wear-out failure", and that the mean time between failures became shorter in order as indicated above. To insure longer lives of those parts, it would be necessary to change the design and the material and to upgrade operators mechanical technique of the mist and dust blower. The failure of the parts A, B and F was classified as "randomfailure", and they did not seem to be the "wear-out" at that time. The parts B and F was evaluated as "initial failure". Quality controls and operating tests by the producer. and the operational training for users should be strengthened so as to eliminate these failures. Were the failures only in the parts A, C, D, E, F and G, it could be said that the "reliability" of the mist and dust blower would fall to 10 percent in the second year, and 50 percent of the mist and dust blowers would fail in all parts A, C, D, E, F and G before the blower would have control insect and disease in 58.2 hectares. The use of the Weibull probability paper for analyzing failures of the mist and dust blowers was effective in that it analyzed failure in the relationship between strength of the parts and users actual circumstanoes.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.251-256
• /
• 2020

Based on the development of SNS in Mobile and Internet, crisis management is regarded as an important issue that determines the rise and fall of businesses. This study aims to contribute to more efficient implementation of crisis management messages by examining the relationship between the strategy of crisis management communication and the level of specificity of the message. The study found that consumers evaluated the crisis-hit company's acceptance communication strategy to show a higher level of integrity, reliability and appropriateness than the defensive strategy. However, this main effect is mediated by the specificity (high specificity vs. low). Specifically, consumers' assessment of crisis management messages and information-seeking behavior were found to be most favorable when used in a mixture of acceptance strategies and high specificity. Conversely, the lowest effect was the combination of defense strategy and high specificity. Based on these results, the theoretical discussions is described for crisis management practitioners of enterprises and organizations.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.101-104
• /
• 2010

Recently, needs for UAVs and small aircraft and small turbo jet or turbo fan engines for these air-crafts are increasing. Size and weight are the two main restrictions in small air-crafts such as UAV or VLJ propulsion system applications. Therefore, high power density is required in small size and designers come up with unconventional solutions in the design of small aero gas turbine engines. One of the solutions is the usage of highly loaded axial compressors. This paper introduces an aerodynamic design method of a highly loaded axial compressor and its review process. Numerical simulation has been carried out to assess the aerodynamic performance of the compressor.

• Journal of the Speleological Society of Korea
• /
• no.78
• /
• pp.17-22
• /
• 2007

The melting temperature and critical temperature (Tc) of $YBa_2Cu_3O_x$ with deferent content impurities of PbO and $BaPbO_3$ were studied. When the PbO was used as addition in $YBa_2Cu_3O_x$, although the melting point could be reduced, the superconductivity (the transition wide, ${\Delta}T_c$) became poor. From the XRD pattern of the sintered mixture of $YBa_2Cu_3O_x$ and PbO it was known that there is a reaction between $YBa_2Cu_3O_x$ and PbO, and the product is $BaPbO_3$. In the process of the reaction the superconducting phase of $YBa_2Cu_3O_x$ was decreased and in the sample $BaPbO_3$ became the main phase. Therefore the superconductivity was reduced. $BaPbO_3$ was chosen as the impurity for the comparative study. The single phase $BaPbO_3$ was synthesized by the simple way from both mixtures of $BaCO_3$ and PbO, $BaCO_3$ and $PbO_2$. Deferent contents of $BaPbO_3$ (10%, 20%, 30%) were added in the $YBa_2Cu_3O_x$. By the phase analysis in the XRD patterns it was proved that there were not reactions between $YBa_2Cu_3O_x$ and $BaPbO_3$. When $BaPbO_3$ was used as impurity in $YBa_2Cu_3O_x$ the superconductivity was much better than PbO as impurity in $YBa_2Cu_3O_x$. But the melting point of $YBa_2Cu_3O_x$ with $BaPbO_3$ could not be found when the temperature was lower than $1000^{\circ}C$ in the DTA measurement.