• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.3
• /
• pp.1-8
• /
• 2016

It was examined that start-up characteristics of a staged combustion cycle engine powerpack. Among various parameters, valve opening time was considered as a main factor affecting the start-up characteristics. Using monte-carlo method, characteristics variation was analyzed when the valve opening time deviates from the nominal value. As a result, the main fuel valve opening time and the start turbine ending time were significant associated with the startup characteristics. When separating main fuel valve opening time and start turbine stop time, main fuel valve opening time was an important factor. For stable operation, the main fuel valve opening time must be set one second before after driving the start turbine. Likewise, it was confirmed that the startup analysis can suggest an appropriate startup sequence for a stable startup.

• Journal of Korean Academy of Nursing
• /
• v.50 no.3
• /
• pp.444-458
• /
• 2020

Purpose: The purpose of this study was to develop the Job Esteem Scale for Korean Nurses (JES-KN) and verify its validity and reliability. Methods: Preliminary items were based on the attributes and indicators elicited from a concept analysis study on Korean nurses' job-esteem. The final preliminary tool for the main survey was confirmed through the content validity test of 10 experts and preliminary survey of 20 hospital nurses. The final preliminary scale was used on 350 hospital nurses in the scale testing phase for the main survey designed to test the validity and reliability of the scale. Results: The final scale consisted of 28 items and 6 factors, these factor explained 66.6% of the total variance. The correlation between the total score and factors ranged from .64 and .84, validating that each sub-factor is suitable to explain job esteem. The correlation coefficient between this scale and the Job Satisfaction Scale for Clinical Nurses ranged from .41 to .70, and the internal consistency for the scale using Cronbach's α for the total items was .94. Conclusion: The JES-KN is a valid and reliable tool that reflects the reality of clinical sites accordingly. The JES-KN may well be used effectively to assess and evaluate the job esteem of Korean nurses.

• Food Science of Animal Resources
• /
• v.29 no.5
• /
• pp.550-556
• /
• 2009

Two experiments were carried out to investigate the relationship of slaughter age and carcass traits of Hanwoo cattle. A total number of 11,284 heads of cattle (4,624 bulls, 6,120 steers, and 540 females) were used in the experiment (Exp.) 1. In the Exp. 2, 3,887 heads of steers slaughtered at age of 24-36 mon were used. After 24 h post-slaughter chilling, the carcasses were weighed and evaluated by an official grader of carcass traits according to the Korean carcass grading standard. Backfat thickness was the main variable in yield index and grade whereas marbling score was the main variable in carcass quality grade. Meat color was an important factor affecting carcass quality grade of bulls; fat color was an important factor affecting those of steers and females; and maturity was an important factor affecting that of females. After 24-mon-old, extension of slaughter age did not automatically increase the quantity and quality of meat. However, 29 mon of age can be regarded as the optimum time to slaughter steers to attain the highest take home money for farmers.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.372-378
• /
• 2005

Finite element analysis of concrete slab system in apartment building was executed using the tables of orthogonal arrays, and optimal design process was proposed. At first, experimental results show that sound peak components to influence the overall level and the rating of floor impact sound insulation were coincident with natural frequencies of the reinforced concrete slab. Finite element model of concrete slab was compared with experimental results, and well corresponded with an error of less than 10%. The tables of orthogonal arrays were used for finite element analysis with 8 factors. 3 related to material properties and 5 related to slab shape parameters and its results were analyzed by statistical method, ANOVA. The most effective factor among them was slab thickness, and main effect factor from slab shape parameters was different from each natural frequency. The interaction was found in the higher mode over $3^{rd}$ natural frequency. From main effect plot and interaction plot, the optimal design factor to increase the natural frequency was determined.

• Journal of Mechanical Science and Technology
• /
• v.14 no.2
• /
• pp.226-235
• /
• 2000

The performance prediction of an airfoil fan using a commerical code, STAR/CD, is verified by comparing the calculated results with measured performance data and velocity fields of an airfoil fan. The effects of inlet tip clearance on performance are investigated. The calculations overestimate the pressure rise performance by about 10-25 percent. However, the performance reduction due to tip clearance is well predicted by numerical simulations. Main source of performance decrease is not only the slip factor but also impeller efficiency. The reduction in performance is 12-16 percent for 1 percent gap of the diameter. The calculated reductions in impeller efficiency and slip factor are also linearly proportional to the gap size. The span-wise distributions of phase averaged velocity and pressure at the impeller exit are strongly influenced by the radial gap size. The radial component of velocity and the flow angle increase over the passsage as the gap increases. The slip factor decreases and the loss increases with the gap size. The high velocity of leakage jet affects the impeller inlet and passage flows. With a larger clearance, the main stream moves to the impeller hub side and high loss region extends from the shroud to the hub.

• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.160-163
• /
• 2004

A passive lossless turn-on/turn-off snubber network is proposed for the boost PWM converter. Previous AC/DC PFC Boost Converter perceives feed forward signal of output for average current-mode control. Previous Boost Convertor, the Quantity of input current will be decreased by the decrease of output current in light load, and also Power factor comes to be decreased. Also the efficiency of converter will be decreased by the decrease of power factor. The proposed converter presents the good PFC, low line current harmonic distortions and tight output voltage regulations using energy recovery circuit. All of the semiconductor devices in the converter are turned on under exact or near zero voltage switching(ZVS). No additional voltage and current stresses on the main switch and main diode occur. To show the superiority of this converter is verified through the experiment with a 640W, 100kHz prototype converter.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.11
• /
• pp.1033-1039
• /
• 2020

Vietnam is conducting an export-led growth model and labour-intensive industries contributing majorly to the total export value. In the context of Industry 4.0, the labour-based industries are significantly affected; hence, enhancing productivity is the key measure to maintain these industries. The garment industry contributes significantly to the total export value of Vietnam. Based on meta-frontier framework, the approach of data envelopment analysis is used to measure technical efficiency of Vietnamese garment firms and the global Malmquist TFP index is utilised to identify productivity change and its components including efficiency, technology and technical gaps between different groups of firms. The data of Vietnamese garment firms from 2013 to 2018 collected from the Vietnam General Statistic Office is used in this study. The results show that: (i) The total factor productivity of Vietnamese garment firms growth, technical progress is the main contributor; (ii) The private garment sector is the leading group; (iii) There is a large technological gap among Vietnamese garment sectors. The private and FDI garment firms have experienced a growth in all components of total factor productivity change. Meanwhile, technological progress change is the main reason to constrain the productivity growth of state-owned garment firms.

• The Journal of Fisheries Business Administration
• /
• v.47 no.3
• /
• pp.1-14
• /
• 2016

The purpose of this research paper is to segment seafood market and find the factor and process that divide the segment market. Cluster analysis and in-depth interview was performed to identify meaningful segment market. The result of the research found three segment market such as seafood integration familiarity group, domestic seafood familiarity group, seafood unfamiliarity group. Seafood integration familiarity group is active consumer that consume both domestic and imported seafood at home. This group have high preference and familiarity about seafood. Seafood familiarity group purchase imported seafood for the reason that imported seafood is cheaper than domestic seafood and have similar quality level. Domestic seafood familiarity group consume mostly domestic seafood and not purchase imported seafood for the reason that imported seafood have low quality and safety. This group have high preference and familiarity about seafood. Seafood unfamiliarity group is low preference group about seafood and seldom eat at home. This study found that the main factor that divide segment market is seafood familiarity that formed by experiencing seafood in youth and seafood familiarity is main factor that determine consumption degree of seafood at home.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.79.3-80
• /
• 2016

We have investigated the correlation analysis between global temperature anomaly and two main factors: geomagnetic activity (aa index) of Earth external factor and CO2 of Earth internal factor. For this, we used NOAA Global Surface Temperature anomaly (Ta) data from 1868 to 2015. The aa index indicates the geomagnetic activity measured at two anti-podal subauroral stations (Canberra Australia and Hartland England) and the CO2 data come from historical ice core records and NOAA/ESRL data. From the comparison between (Ta) and aa index, we found several interesting things, First, the linear correlation coefficient between two parameters increases until 1985 and then decreases rapidly. Second, the scattered plot between two parameters shows a boundary of the correlation tendency (positive and negative correlation) near 1985. A partial correlation of (Ta) and two main factors (aa index, CO2) also shows that the geomagnetic effect (aa index) is dominant until about 1985 and the CO2 effect becomes much more important after then. These results indicate that the CO2 effect become very an important factor since at least 1985. For a further analysis, we simply assume that Ta = Ta(aa)+Ta(CO2) and made a linear regression between (Ta) and aa index from 1868 to 2015. A linear model is then made from the linear regression between energy consumption (a proxy of CO2 effect) and Ta-Ta(aa) since 1985. Our results will be discussed in view of the prediction of global warming.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.12 no.3
• /
• pp.23-29
• /
• 1992

This paper discussed the effect of cold on the forge and animal production and reviewed the main problems and present developement of grasslands farming in winter cold zones in China. It is considered that climatic factor,sepecially cold winter conditon, is the ,main limitint factor of the frasslands productionm which cause the seasonal unballance of forage prduction and forage supply in winter cold zones in china. Present ang future development of grasslands farming in winter cold zones are discussed ditailly.