• 대한의용생체공학회:의공학회지
• /
• 제24권3호
• /
• pp.141-149
• /
• 2003

본 논문에서는 초음파 의용 영상시스템의 B-모드 영상으로 잘 관찰되지 않는 암이나 종양을 진단하기 위하여 인체 연조직의 탄성계수를 측정하여 영상화하는 방법을 제안하였다. 연조직의 단단함을 측정하기 위하여 조직에 정현파 진동을 인가하고 연조직의 기계적인 진동의 크기를 초음파 영상의 스페클 밝기의 시간적 변화를 추정하여 구하였다. 제안한 방법은 B-모드 영상에서 비교적 적은 계산량으로 쉽게 조직의 단단함을 추정할 수 있음을 시뮬레이션과 실험으로 검증하였다

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 Proceedings of the second conference of aseanian membrane society
• /
• pp.33-38
• /
• 2004

Molecular modeling of gas permeation through zeolite membranes with/without intercrystalline region was carried out. Molecular dynamics (MD) and Monte Carlo (MC) simulations were performed to estimate the diffusion coefficient and adsorption parameters respectively, and our proposed combined method of molecular simulation techniques with a permeation theory (CMP) was used to estimate gas permeability. The calculated permeability of gases (Ar, He, Ne, $N_2$, $0_2$, $CH_4$) at 301 K for the single crystal membrane model was about one order of magnitude larger than the experiential values, although the dependence on the molecular weight of the permeating species agreed with experiments. On the other hand, the estimated permeability using the diffusivity and adsorption parameters of the intercrystalline region model was in good agreement with the experiments. The consistency between experiments and the estimated values means the importance of considering the intercrystalline region and the validity of CMP method to predict the performance of zeolite membranes.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권8호
• /
• pp.529-535
• /
• 2000

In this paper, a current control system of a single phase PWM AC/DC converter using a reduced-order Luenberger observer without source voltage sensors is proposed. The sinusoidal input current and unity input power factor are realised based on the estimated source voltage performed by the reduced-order Luenberger observer using actual currents and DC link voltage. The poles of the reduced-order Luenberger observer are placed in the left half plane of s-plane by the pole-placement method in order to acquire the stability of the observer. The magnitude and the phase of the estimated source voltage are used to accomplish the unity power factor. The proposed method is implemented by DSP(Digital Signal Processor). Experimental Results verify that the reduced-order observer estimates the source voltage without the estimation error and the control system accomplishes the unity power factor, and constant DC link voltage.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1106-1108
• /
• 2004

The arcing contact wear of circuit breakers can be the major cause for the maintenance requirement. The control of arcing times as short as possible but larger than the given minimum arcing time may be the effective way to mitigate the contact wear and to lessen the expenditure of a maintenance. In this paper the method for minimizing the arcing time is described. The basic concept used in the proposed method is the estimation of the current interruption instant from the informations such as the phase angle at the instant of trip commands and the magnitude of interrupted currents.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.637-640
• /
• 2005

We propose a sound source localization method using the Head-Related-Transfer-Function (HRTF) to be implemented in a given platform. HRTFs contain not only the information regarding proper time delays but also phase and magnitude distortions due to diffraction and scattering by the shading object. Therefore, a set of HRTFs for any given platform provides a substantial amount of information as to the whereabouts of the source. In this study, we introduce new phase criterion in order to find the sound source location in accordance with the HRTF database empirically obtained in an anechoic chamber with the given platform. Using this criterion, we analyze the estimation performance of the proposed method in a household environment.

• 한국지진공학회논문집
• /
• 제27권2호
• /
• pp.111-118
• /
• 2023

The 2017 Pohang earthquake afflicted more significant economic losses than the 2016 Gyeongju earthquake, even if these earthquakes had a similar moment magnitude. This phenomenon could be due to local site conditions that amplify ground motions. Local site effects could be estimated from methods using the horizontal-to-vertical spectral ratio, standard spectral ratio, and the generalized inversion technique. Since the generalized inversion method could estimate the site effect effectively, this study modeled the site effects in the Korean peninsula using the generalized inversion technique and the Fourier amplitude spectrum of ground motions. To validate the method, the site effects estimated for seismic stations were tested using recorded ground motions, and a ground motion prediction equation was developed without considering site effects.

• 한국터널지하공간학회 논문집
• /
• 제9권3호
• /
• pp.275-286
• /
• 2007

지하암반에서 지하구조물을 구축하는 경우, 지하구조물의 안정성 확보를 위한 굴착, 지보 및 대책공법은 현지 암반응력의 크기 및 방향에 큰 영향을 받게 된다. 따라서 터널과 같은 지하구조물의 설계와 안정성 해석에 있어서 현지 암반응력의 분포특성을 고려하는 것은 대단히 중요한 문제라고 할 수 있다. 본 연구에서는 암반응력을 고려한 터널설계 사례를 통하여 합리적이고, 안정적인 지하구조물 설계 방안에 대하여 고찰하고자 하였다 이를 위하여 Q-System에 의한 암반분류시 입력변수인 응력저감계수(SRF) 평가과정 및 표준지보패턴 설계 사례에 대하여 검토하였다. 또한 터널안정성 해석시 측압계수 크기 및 주응력 방향을 변수로 한 수치해석을 수행하여 터널 안정성 해석시 개선사항에 대하여 제안하였다.

• 전기학회논문지
• /
• 제61권4호
• /
• pp.542-548
• /
• 2012

This study presents a new method of system modeling by using the Discrete Fourier Transform for the position control system of DC Motor. And the proposed method is similar to the method of System Identification by analysis of correlation of the measured input-output data. The measured output signals are transformed to the frequency domain using DFT. The Fourier Spectrum of the transformed signals is used for knowing to the feature of having an important effect on the system. And transfer function of the second order system is estimated by the dominant parameter which is computed in the magnitude and the phase of Fourier spectrum of the transformed signals. In addition, the output signal includes the unique feature of system. So, although the basic parameter of the system is unknown for us, the proposed method has an advantage to system modeling. And the controller is easily designed by the estimated transfer function. Thus, in this paper, the proposed method is applied to the system modeling for the position control system of DC Motor and the PD-controller is designed by the estimated model. And the efficiency and the reliability of the proposed method are verified by the experimental result.

• Geomechanics and Engineering
• /
• 제12권6호
• /
• pp.1003-1020
• /
• 2017

Estimation of groundwater inflow into underground opening is of critical importance for the design and construction of underground structures. Groundwater inflow into a pilot underground storage facility in China was estimated using analytical equations, numerical modeling and field measurement. The applicability of analytical and numerical methods was examined by comparing the estimated and measured results. Field geological investigation indicated that in local scale the high groundwater inflows are associated with the appearance of open joints, fractured zone or dykes induced by shear and/or tensile tectonic stresses. It was found that 8 groundwater inflow spots with high inflow rates account for about 82% of the total rate for the 9 caverns. On the prediction of the magnitude of groundwater inflow rate, it was found that could both (Finite Element Method) FEM and (Discrete Element Method) DEM perform better than analytical equations, due to the fact that in analytical equations simplified assumptions were adopted. However, on the prediction of the spatial distribution estimation of groundwater inflow, both analytical and numerical methods failed to predict at the present state. Nevertheless, numerical simulations would prevail over analytical methods to predict the distribution if more details in the simulations were taken into consideration.

• 한국방재학회 논문집
• /
• 제8권3호
• /
• pp.95-103
• /
• 2008

지진이 발생하기 전에 피해규모를 물리적, 경제적, 사회적 재해로 구분하여 예측하고, 이를 이용하여 사전에 충분히 대처한다면 그 피해를 최소한으로 경감할 수 있을 것이다. 본 연구에서는 HAZUS의 결정론적 방법을 이용하여 경주지역 규모 6.7의 가상지진에 의한 재해를 예측해보았다. 이 방법을 이용하기 위해, 본 연구에서는 한반도 감쇠특성과 가장 잘 부합한다고 판단되는 Sadigh 등(1997)의 식에 지반분류 B, C와 D를 적용하였다. 그 외에도 이 방법에서 사용이 가능한 여러 감쇠식을 적용하여 같은 지역의 지진재해를 예측한 후 서로 상이하게 나타나는 피해규모를 살펴보았다. 각기 다른 감쇠식 적용에 따라 재해예측결과는 다소 다르게 나타남을 알 수 있었다. 이번 연구에서 산출한 지진재해 예측결과는 연구지역의 지진재해위험성을 미리 살펴 재해발생 시 인명 및 재산 피해를 최대한 경감시키고, 응급상황에 신속히 대처할 수 있도록 재해저감 정책수립 단계에서 효과적으로 활용될 수 있으리라 사료된다.