• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.530-532
• /
• 2018

Digital imaging equipment has been used for a variety of purposes in a wide range of society and has become an important element of the fourth industrial revolution. However, there are various causes of noise in the process of transmitting / receiving data and processing of the equipment, thus affecting the accuracy and reliability of the equipment. In this paper, we propose an image restoration algorithm based on pixel range set by standard deviation to effectively remove Salt and Pepper noise. In the conventional methods, the performance degrades in the edge and high frequency components of the image. However, the proposed method has better noise reduction performance than the conventional method by performing the noise elimination considering the image boundary. It has confirmed that the performance of such PSNR and magnified image, the experimental results showed that the proposed algorithm superior compared to existing methods.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.7
• /
• pp.1342-1348
• /
• 2017

In an era where digital data takes on great importance, images are essential to various media. Noise is generated during the acquisition and transmission of such images, caused by a number of external factors. The removal of noise is an essential step in image processing. There are various methods used to remove noise, in accordance with the cause or form of the noise. AWGN is one of the leading methods. As such, this paper applies the edge detection method using the mean of each pixel after categorizing in detail the partial masks into nine areas as part of the preliminary process, in order to minimize noise that had been added to the image. In addition, the paper suggests an algorithm that applies different filters to the partial masks by using the critical mass value of the transfigured edge detection. To verify the competence of the suggested algorithm, it was compared with existing methods by using magnified images and PSNR(peak signal to noise ratio).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.8
• /
• pp.959-967
• /
• 2011

An importance of design that considers the characteristics of fashion that plays a role of a medium that communicates with customers (and is not simply clothes or products by adding the particular culture factors of a local country to the development of glocalism) is discussed. While the cultural consumption becomes a core key word, the survey of customers is conducted to develop a party-wear design that applies a Korean image suitable for the party culture industry magnified by the young generation's cultural trends. Based on it, we suggest a party-wear design that applies Dancheong's lotus and derive the followed results. The first, one-piece and accessory coordination was the highest by 49.3% for the party-wear coordination and design. In addition, Dancheong was the highest by 16.5% for the traditional pattern (thought to be representative for Korean image). Among the traditional patterns, for a pattern suitable for party-wear, the case applying flowers such as the Japanese apricot flower, lotus flower, and peony was the highest. The second, among the several patterns used Dancheong that was represented by a Korean image of a lotus flower pattern because of the characteristics of strong vitality and blooming in dirty mud was often used for the pattern of clothes. The third, under the motive of the results of the survey and Dancheong's lotus flower pattern, we developed 2 methods of one piece and accessory coordination, 2 methods of top and skirt coordination, and 1 method of jacket and one piece coordination as the party-wear.

• The Journal of the Korea Contents Association
• /
• v.7 no.12
• /
• pp.346-354
• /
• 2007

Interpolation methods to get the magnified image from an image with low resolution use known pixels to make an interpolated pixel. This interpolation process usually generates blurred edges and blocking effect in the result image. To improve these defects, conventional methods multiply proper weights reflecting neighborhood pixels and add the values during interpolating process. The proposed method changes input pixels in consideration of information of neighborhood pixels, gets interpolated pixels by using these values and improves the quality of interpolated image. Firstly, we compute difference values of the diagonal directions of a pixel and classify flat regions and complex regions according to these values. If the regions is complex ones, the proposed method changes an original pixel into a new value using a input pixel and a median value of it's neighbor pixels. Therefore, the proposed method applies bilinear method to the original pixels in flat regions and the changed ones in complex regions and produces the interpolated images. We evaluate the performance of the proposed method with existing methods by using PSNR and the quality of enlarged image. The results show that the proposed method improves PSNR in comparing with conventional methods and that is superior to the existing methods in terms of the quality of the interpolated image.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.2 s.308
• /
• pp.19-29
• /
• 2006

As the security of personal information is becoming more important in mobile phones, we are starting to apply iris recognition technology to these devices. In conventional iris recognition, magnified iris images are required. For that, it has been necessary to use large magnified zoom & focus lens camera to capture images, but due to the requirement about low size and cost of mobile phones, the zoom & focus lens are difficult to be used. However, with rapid developments and multimedia convergence trends in mobile phones, more and more companies have built mega-pixel cameras into their mobile phones. These devices make it possible to capture a magnified iris image without zoom & focus lens. Although facial images are captured far away from the user using a mega-pixel camera, the captured iris region possesses sufficient pixel information for iris recognition. However, in this case, the eye region should be detected for accurate iris recognition in facial images. So, we propose a new fast iris detection method, which is appropriate for mobile phones based on corneal specular reflection. To detect specular reflection robustly, we propose the theoretical background of estimating the size and brightness of specular reflection based on eye, camera and illuminator models. In addition, we use the successive On/Off scheme of the illuminator to detect the optical/motion blurring and sunlight effect on input image. Experimental results show that total processing time(detecting iris region) is on average 65ms on a Samsung SCH-S2300 (with 150MHz ARM 9 CPU) mobile phone. The rate of correct iris detection is 99% (about indoor images) and 98.5% (about outdoor images).

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.803-807
• /
• 2009

The bobsleigh is a winter sport which use a sled to slide down an ice-covered course. There is a big expectation for having a training environment and being able to train year round. At present, training is very limited due to the season or course facilities. A variety of VR (Virtual Reality) equipment has been developed in recent years, and it is beginning to spread. We have also made our contribution in bobsleigh simulation. The reactive force applied in our bobsleigh simulation is much smaller than that of a real bobsleigh. This paper proposes a method to enhance reactive force of bobsleigh simulation in real time. The reactive force is magnified instantly in the physically-based simulation. The Laplacian filter is applied to the sequence of reactive force, this technique is often used in the field of image processing. The simulation is comprised of four large scale surround screens and a 6-D.O.F. (Degree Of Freedom) motion system. We also conducted an experiment with several motion patterns to evaluate the effectiveness of enhancement. The experimental results proved useful in some cases.

• Journal of KIISE:Software and Applications
• /
• v.34 no.11
• /
• pp.961-970
• /
• 2007

Since the usual conventional edge detectors employ the local differential derivatives, the detected edges are not uniform in their widths or some edges are missed out of the detection on magnified images. We employ a mapping from the exactly monotonic intensity distributions of ramp edges to the simple step functions of intensity, which is referred to as perfect sharpening map of ramp edges. This map is based on the non-local feature of intensity distribution and used to introduce a modified differentiation, in terms of which we can construct an efficient edge detector adaptive to the variation of edge width. By adopting the operator MADD in this paper, we developed an edge detector that works stably against the magnification of image or the variation of edge width. It is shown by comparing to the conventional algorithms that the proposed one is very excellent.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.21 no.2
• /
• pp.307-316
• /
• 1991

The purpose of this study is to improve the availabilities of radiographic technics as diagnostic method related to mandibular canal in dental clinic. For this study 12 dry mandibles were used and 12 orthopantomograms were taken for measuring the gonial angle and the angle of mandibular canal to inferior border of mandible. 12 sites located between the 1st premolar to the 3rd molar region of 3dry mandibles were selected randomly, for measuring the vertical image magnification rates on three films; intraoral film, orthopantomogram, and computed tomogram, respectively and the thickness of cortical bone, and for observing bucco-lingually and supero-inferiorly location of the mandibular canal. The acquired results were as follows: 1. The means of the gonial angle and the angle of mandibular canal to inferior border of mandible were 123.9° and 143.5° And the two angles of dry mandible in alveolar crest stage were greater than in alveolar socket stage. 2. The vertical image length on intraoral film by paralleling technic was magnified by 3.07% on the average, the length on orthopantomogram by 18.49%, and the length on computed tomogram by 0.27%. 3. Observation of the bucco-lingually positional relationship of the mandibular canal was impossible by occlusal projection with the cross section technic and intraoral standard projection with the Clack's rule, however, possible by computed tomogram. 4. The thickness of the cortical bone of mandible was thickest in inferior border, and thicker by 6.59% at buccal side than at lingual side.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.21 no.2
• /
• pp.297-306
• /
• 1991

The purpose of this study is to improve the availabilities of radiographic technics as diagnostic methods to evaluate maxillary sinus in dental clinic. For the morphologic study of maxillary sinus, 20 dry maxillas were used and intraoral standard views, orthopantomograms, and skull P-A views were taken. For measuring the vertical image magnification rates, 5 sites in maxillary molar regions of 5 dry mandibles were selected radndomly and 25 wires of the determined sizes for selected portions were attached to the sites, after then, intraoral radiograms with bisecting technic and orthopantomograms were taken. The acquired results were as follows: 1. The anterior extension of the maxillary sinus on orthopantomogram was the distal side of the canine in 45.45% of subjects, the mesial side of the canine in 27.27%, the lateral incisor in 9.09%, the mesial side of the 1st premolar in 9.09%, and the mesial side of the 2nd pre-molar in 9.09%. 2. The positional relationship between the floor of maxillary sinus and the apex of alveolar socket revealed superimposed type in 58.3% of subjects, approached type in 33.3%, and separated type in 8.4%. 3. The morphology of inferior border of maxillary sinus was simple V or U shape in edentulous stage and V or wide U shape in alveolar socket stage. 4. The vertical image length on intraoral film taken by bisecting technic was magnified by 27.23% on the average and the length on orthopantomogram by 12.35%. 5. The inferior borders of maxillary sinus coinciding with each of the areas bearing the anterior and the posterior teeth on skull P-A view were determined.

• Journal of the Korean Society of Radiology
• /
• v.2 no.2
• /
• pp.23-30
• /
• 2008

X-ray microscopy with synchrotron radiation(SR) might be a useful tool for novel x-ray imaging in the clinical and laboratory settings. Microscopically, it enables us to observe detailed structure of animal organs samples with a great magnification power and an excellent resolution. The phase contrast mechanisms in image by X-ray are described. The phase-contrast X-ray imaging with SR from in-vivo and in-vitro mouse tail, rat nerve and rat lung were obtained with an 8 KeV monochromatic beam. The visual image was magnified using 10x microscope objective lens and captured using an digital CCD camera. The results showed more structural details and high resolution images with SR imaging system than conventional X-ray radiography system. The SR imaging system may have a potential for imaging in biological researches, material applications and clinical radiography.