• KIEE International Transactions on Power Engineering
• /
• 제2A권4호
• /
• pp.153-159
• /
• 2002

Power transformer protective relay should block the tripping during magnetizing inrush and rapidly operate the tripping during internal faults. Recently, the frequency environment of power system has been made more complicated and the quantity of 2nd frequency component in inrush state has been decreased because of the improvement of core steel. And then, traditional approaches will likely be maloperate in the case of magnetizing inrush with low second harmonic component and internal faults with high second harmonic component. This paper proposes a new relaying algorithm to enhance the fault detection sensitivities of conventional techniques by using a fuzzy logic approach. The proposed fuzzy based relaying algorithm consists of flux-differential current derivative curve, harmonic restraint, and percentage differential characteristic curve. The proposed relaying was tested with relaying signals obtained from EMTP simulation package and showed a fast and accurate trip operation.

• 한국자기학회지
• /
• 제4권2호
• /
• pp.150-153
• /
• 1994

본 연구에서는 2쌍의 헬름홀쯔코일을 사용하여 비본형 시편의 종방향 및 횡방향으로 자기장 을 인가한 상태에서 열처리한 Co-계 비정질 합금 VITROVAC 6030의 보자력 노이즈를 측정하였다. 시편의 종방향 및 횡방향으로 dc 자기장을 인가한 상태에서 열처리한 시편의 경우, 보자력노이즈는 자화주파수 가 1~100 kHz 범위에서 거의 변화하지 않았으며, 시편의 종방향으로 ac 자기장을 횡방향으로는 dc자기 장을 인가한 상태에서 열처리한 시편의 경우의 보자력 노이즈는 자화주파수의 거듭제곱으로 감소하는 경 향을 보였다. 또한 자구핵형성이 일어날 경우 보자력 노이즈는 크게 증가하며 자화주파수의 거듭제곱으 로 감소하는 경향을 보였다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2000년도 학술대회논문집
• /
• pp.246-250
• /
• 2000

In this paper, Frequency spectra of AE(acoustic emission) signals generated from the magnetizing and the load currents in the actual operating cast-resin power transformer of 500[kVA] under distribution system of22.9[kV] were also analysed to distinguish the AE signals due to void discharges from the magnetic circuit noises in the core of cast-resin power transformer. As the experimental results, we could distinguish the AE signals whether those signals were caused due to the void discharges or due to the magnetic circuit noises by analyzing the frequency spectrum of AE signals. Frequency spectra of AE signals generated from the cast-resin power transformer in operation due to both the magnetizing and the load currents appeared in the range of 40-120[khz].

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1998년도 춘계연구발표회 논문개요집
• /
• pp.128-129
• /
• 1998

• Journal of Electrical Engineering and Technology
• /
• 제12권5호
• /
• pp.1697-1708
• /
• 2017

This paper proposes an algorithm for the differential protection of an Indirect Symmetrical Phase Shift Transformer (ISPST) by considering the different behaviors of the compensated differential current under internal fault and magnetizing inrush conditions. In this algorithm, a criterion function is defined which is based on the difference of amplitude of the wavelet transformation over a specific frequency band. The function has been used for the discrimination between three phase magnetizing inrush and internal fault condition and requires less than a quarter cycle after disturbance. This method is independent of any coefficient or threshold values of wavelet transformation. The merit of this algorithm is demonstrated by the simulation of different faults in series and excitation unit and magnetizing inrush with varying switching conditions on ISPST using PSCAD/EMTDC. Due to unavailability of in-field large interconnected transformers for such a large number of destructive tests, the results are further verified by Real Time Digital Simulator (RSCAD/RTDS). The proposed algorithm has been compared with the conventional harmonic restraint based method that justifies the application of wavelet transform for differential protection of ISPST. The proposed algorithm has also been verified for different rating of ISPSTs and satisfactory results were obtained.

• 조명전기설비학회논문지
• /
• 제18권2호
• /
• pp.36-43
• /
• 2004

본 연구에서는 운전중인 직류전동기의 브러시를 임의로 회전하여 브러시와 정류자편에 불꽃을 발생시켰을 때, 초음파센서와 AE센서를 이용하여 각각의 기계적 노이즈 신호를 검출하였으며, 이를 주파수 스펙트럼으로 분석하였다. 또한 직류전동기의 브러시가 중성축에 정상적으로 위치하여 운전하고 있을 때, 초음파센서와 AE센서를 이용하여 각각의 자기적 노이즈 신호를 검출하였으며, 이를 주파수 스펙트럼으로 분석하였다. 그리고 직류전동기의 브러시를 임의로 회전한 경우의 기계적 노이즈 신호 및 브러시가 중성축에 위치한 경우의 자기적 노이즈 신호를 비교ㆍ분석하였다. 실험 결과, 운전중인 직류전동기의 브러시를 회전방향으로 임의로 회전하여 검출한 초음파의 기계적 노이즈 신호는 브러시가 중성축에 정상적으로 위치하여 검출한 초음파의 자기적 노이즈 신호보다 대략 2.5∼3.0배 증가되었다. 또한 운전중인 직류전동기의 브러시를 회전방향으로 임의로 회전하여 불꽃을 발생시켰을 때, AE의 기계적 노이즈 신호를 검출하여 주파수 스펙트럼으로 분석한 결과 주된 주파수 영역이 대략 1.3[MHz]∼l.5[MHz]인 것으로 나타났다

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제11B권4호
• /
• pp.156-163
• /
• 2001

In this paper an optimal switching angle control of a switched reluctance motor (SRM) drive system is investigated for achieving maximum energy conversion ratio. A new magnetizing method is proposed with a low switching frequency. The proposed algorithm maximizes the positive energy conversion region, which is directly related to the mechanical output, and reduces the reactive power region with the same field energy region. As a consequence, a torque ripple is also sufficiently reduced compared with that of the conventional switching angle magnetizing method. Experimental results show that the proposed scheme provides a high efficiency and a low ripple drive.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 추계학술대회 논문집
• /
• pp.37-40
• /
• 2001

This paper is suggested an optimal switching angle of a switched reluctance motor drive system for maximum energy ratio. A new magnetizing method with a low-frequency increasing the energy conversion ratio that is related to the efficiency of motor is proposed As results, it improves the efficiency about 2[$\%$]. And a torque ripple is also reduced compared with that of the conventional switching angle magnetizing approach. In order to start softly regardless of a large ripple torque, the profile of phase current is predicted and current control mode was adapted when it is operated under the starting speed.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.224-227
• /
• 2004

The goal of this paper is optimal switching angle of switched reluctance motor drive system for maximum energy ratio. A new magnetizing method with a low-frequency increasing the energy conversion ratio that is related to the efficiency of motor is proposed. As results, it improved the efficiency about $2[\%]$. And a torque ripple is also sufficiently reduced compared with that of the conventional switching angle magnetizing approach. In order to start softly regardless of a large ripple torque, the profile of phase current is predicted by the ANFIS, and current control mode was adapted when it is operated under the starting speed. Variable implementations on the fields will guarantee the more practical drive system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.980-982
• /
• 2001

SRM has different characteristics according to their control methods. Therefore, A new magnetizing method with a low-frequency increasing the energy conversion ratio that is related to the efficiency of motor is proposed. As results, it improved the efficiency about 2(%) and decreased the noise level up to 5[dB]. And a torque ripple is also sufficiently reduced compared with that of the conventional switching angle magnetizing approach.