• 한국자기학회지
• /
• 제23권4호
• /
• pp.122-125
• /
• 2013

비정질 합금인 CoSiB과 비자성체 Pd을 이용하여 CoSiB/Pd 다층박막을 제작하고, 그 자기적인 특성을 분석하였다. $[CoSiB\;t_{CoSiB}/Pd\;1.3nm]_5$ 다층박막을 $t_{CoSiB}$ = 0.1~0.6 nm의 범위로 제작하였고, 동일한 방법으로 $[CoSiB\;0.3nm/Pd\;t_{Pd}]_5$ 다층박막을 $t_{Pd}$ = 1.0~1.6 nm의 범위로 제작하여 두께에 따른 자기이방성과 포화자화도를 측정하였다. CoSiB 두께가 증함에 따라 포화자화도가 증가하는 경향을 보였는데, 특히 CoSiB의 두께가 0.2~0.3 nm 일 때 포화자화도가 급격하게 증가하였다. 보자력은 두께 0.2 nm 에서 최대값을 보이다가 두께가 증가함에 따라 점차 감소하는 것을 확인하였다. Pd의 두께 변화 실험에서는 포화자화도는 1.1~1.2 nm 구간에서 약간 감소하다가 1.3 nm 이후 점차 증가하였으며, 보자력은 포화자화도에 비해 확연한 규칙성을 보이지 않았으나, 전체적으로 Pd의 두께가 증가함에 따라 값이 감소하는 것을 알 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.62-64
• /
• 1996

Two current approaches for modeling the vector magnetic hysteretic process are the vector Preisach models and those models based on a system of noninteracting pseudo-particles. The pseudo-particles are intended to mimic the average behavior of real media particles. The simplest switching mechanisms of pseudoparticles is the Stoner-Wholfarth model. The Preisach models are quite precise in specifying the experimental input to the models. The vector properties of the Preisach models are, however, inadequate. This is partly because of the questionable assumptions used in coupling the various vector hysteresis components. Also these models do not include reversible magnetization changes. Unlike Preisach counterpart, the Stoner-Wholfarth model is inherently vector in nature. This is because spatial distribution and switching mechanisms are imposed on the system of pseudo-particles, so they come closer to representing the physical reality. The lack of interaction between pseudo-particles exclude the usefulness of the Stoner-Wholfarth model for small fields when the medium is traversing minor loops. The present work is an attempt at combining the advantages of above two models into one composite model, including the effect of particle interaction.

• 한국재료학회지
• /
• 제28권3호
• /
• pp.159-165
• /
• 2018

In order to increase the efficiency of the sputtering method widely used in thin film fabrication, a dc sputtering apparatus which supplies both high frequency and magnetic field from the outside was fabricated, and cobalt thin film was fabricated using this apparatus. The apparatus can independently control the applied voltage, the target-substrate distance, and the target current, which are important parameters in the sputtering method, so that a stable glow discharge is obtained even at a low gas pressure of $10^{-3}$ Torr. The fabrication conditions using the sputtering method were mainly performed in $Ar+O_2$ mixed gas containing about 0.6 % oxygen gas under various Ar gas pressures of 1 to 30 mTorr. The microstructure of Co thin films deposited using this apparatus was examined by electron diffraction pattern and X-ray techniques. The magnetic properties were investigated by measuring the magnetization curves. The microstructure and magnetic properties of Co thin films depend on the discharge gas pressure. The thin film fabricated at high gas pressure showed a columnar structure containing a large amount of the third phase in the boundary region and the thin film formed at low gas pressure showed little or no columnar structure. The coercivity in the plane was slightly larger than that in the latter case.

• Journal of Electrical Engineering and Technology
• /
• 제11권1호
• /
• pp.29-37
• /
• 2016

Fast and accurate fault diagnosis of the position sensor is of great significance to ensure the reliability as well as sensor fault tolerant operation of the Switched Reluctance Wind Generator (SRWG). This paper presents a fault diagnostic scheme for a SRWG based on the residual between the estimated rotor position and the actual output of the position sensor. Extreme Learning Machine (ELM), which could build a nonlinear mapping among flux linkage, current and rotor position, is utilized to design an assembled estimator for the rotor position detection. The data for building the ELM based assembled position estimator is derived from the magnetization curves which are obtained from Finite Element Analysis (FEA) of an SRWG with the structure of 8 stator poles and 6 rotor poles. The effectiveness and accuracy of the proposed fault diagnosis method are verified by simulation at various operating conditions. The results provide a feasible theoretical and technical basis for the effective condition monitoring and predictive maintenance of SRWG.

• 전기학회논문지
• /
• 제56권1호
• /
• pp.57-65
• /
• 2007

Along with the development of power electronics and magnetic materials, permanent magnet (PM) brushless direct current (BLDC) motors are now widely used in many fields of modern industry BLDC motors have many advantages such as high efficiency, large peak torque, easy control of speed, and reliable working characteristics. However, Compared with the other electric motors without a PM, BLDC motors with a PM have inherent cogging torque. It is often a principle source of vibration, noise and difficulty of control in BLDC motors. Cogging torque which is produced by the interaction of the rotor magnetic flux and angular variation in the stator magnetic reluctance can be reduced by sinusoidal air-gap flux density waveform due to reduction of variation of magnetic reluctance. Therefore, this paper will present a design method of magnetizing system for reduction of cogging torque and low manufacturing cost of BLDC motor with isotropic bonded neodynium-iron-boron (Nd-Fe-B) magnets in ring type by sinusoidal air-gap flux density distribution. An analytical technique of magnetization makes use of two-dimensional finite element method (2-D FEM) and Preisach model that expresses the hysteresis phenomenon of magnetic materials in order for accurate calculation. In addition, For optimum design of magnetizing fixture, Factorial design which is one of the design of experiments (DOE) is used.

• 한국자기학회지
• /
• 제1권2호
• /
• pp.74-78
• /
• 1991

수치해석을 이용하여 자기기록장치를 구성하는 여러 요소들이 정보의 기록 또는 재생에 미치는 영향을 해석할 수 있는 방법을 기술하고 이것을 수직자기기록장치에 적용하여 기록밀도의 변화에 따른 재생전압의 형태을 구하였다. 자기기록장치에서 정보가 기록되는 것은 기록매체의 히 스테리시스현상에 기인하는 것이므로 수치해석시 히스테리시스 특성을 고려해 주어야 한다. 본 논 문에서는 Preisach 모텔과 유한요소법을 이용하여 히스테리시스 특성을 포함하는 자기기록장치의 기록 및 재생의 전과정을 해석할수 있는 수치해석 기법을 확립하고, 이 방법으로 자기기록장치의 여러요소에 대한 영향을 구할수 있음을 보이기 위하여 이것을 수직자기 기록장치에 적용하여 기록 밀도가 17[KFRP]에서 254[KFRPI]까지 증가할때 기록과정에서 주어진 전류파형에 대하여 매체에 기록된 자화량을 구하고, 재생과정에서 헤드에 유기되는 전압을 기록밀도 증가에 따른 재생전압크기 의 변화를 구하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제22권2호
• /
• pp.21-25
• /
• 2020

We investigated the flux pinning property of GdBa₂Cu₃O_7-x (GdBCO) films on top of La_0.7Sr_0.3MnO₃ (LSMO) nanoparticles deposited by a surface decoration. Both GdBCO films and LSMO nano particles were deposited by pulsed laser deposition and the number of laser pulses were varied from 80 to 320 in order to control the density of the LSMO nanoparticles. The magnetization data at 77 K showed that the critical current density (J_c) was enhanced in all of the GdBCO films with LSMO nanoparticles and that the J_c enhancement was found to be inversely proportional to the LSMO nanoparticle density. Structural analyses revealed that LSMO nanoparticles induce a compressive strain in the GdBCO films resulting in a disordering in the CuO₂ plane. Therefore, the enhanced flux pinning property in the GdBCO with LSMO nanoparticles was attributed to the competing effect between the increase of pinning centers and the increase of compressive strain in the superconducting phase.

• 대한방사선기술학회지:방사선기술과학
• /
• 제25권1호
• /
• pp.35-37
• /
• 2002

To assess the new multichannel cochlear implant by radiography in Stenver's projection, because MRI generates artifacts, inducing an electrical current and causing device magnetization. CT is relatively expensive and the metal electrodes scatter the image. Multichannel cochlear implant insertion using the multichannel cochlear implant device. Patients underwent postoperative radiography of their implants. The radiographs were obtained in a Stenver's. The insertion depth of the implant was measured on the radiographs and the results were correlated with the surgical results of insertion depth and with audiometric tests. Patients a correct inserted electrode was found, while in patient complications concerning the electrode were noticed. Radiographs in the Stenver's projection are sufficient for the postoperative assessment of the multichannel cochlear implant device and an exact evaluation of the insertion depth.

• 한국초전도ㆍ저온공학회논문지
• /
• 제4권1호
• /
• pp.21-25
• /
• 2002

The effect of Ca-doping on the superconducting properties of Nd-Ba-Cu-O bulk superconductors, fabricated by the oxygen-controlled melt growth process, has been systematically investigated. Various c-axis textured bulk samples were grown using precursors with the nominal compositions of $Nd_{1.8-x}Ca_{x]Ba_{2.4}Cu_{3.4}O_{y}$ (x= 0.00, 0.02, 0.05, 0.10, 0.15) in a reduced oxygen atmosphere of 1%O$_2$ in Ar. Magnetization measurements revealed that the critical temperatures(Tc) were almost linearly depressed from 95K to 86K with increasing the Ca dopant from x : 0.0 to 0.15, respectively, and thus critical current densities(Jc) at 77K and for H//c-axis of specimens were gradually degraded with increasing x. Compositional analyses revealed that although the amounts of the Ca dopant both in $NdBa_2Cu_2O_y(Nd123) and Nd_4Ba_2Cu_2O_{10}(Nd422)$,/TEX> were increased with increasing x, only less than half of the initial Ca compositions were detected in melt-grown Ca-doped Nd-Ba-Cu-O bulk crystals. The supression of Tc is attributed to an increased Nd substitution for the Ba site in the Nd123 superconducting matrix with increasing the amount of the Ca dopant.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권1호
• /
• pp.28-32
• /
• 2016

There are a few thousand abandoned metal mines in South Korea. The abandoned mines cause several environmental problems including releasing acid mine drainage (AMD), which contain a very high acidity and heavy metal ions such as Fe, Cu, Cd, Pb, and As. Iron oxides can be formed from the AMD by increasing the solution pH and inducing precipitation. Current study focused on the formation of iron oxide in an AMD and used the oxide for adsorption of heavy metals. The heavy metal adsorbed iron oxide was separated with a superconducting magnet. The duration of iron oxide formation affected on the type of mineral and the degree of magnetization. The removal rate of heavy metal by the adsorption process with the formed iron oxide was highly dependent on the type of iron oxide and the solution pH. A high gradient magnetic separation (HGMS) system successfully separated the iron oxide and harmful heavy metals.