• 한국주조공학회지
• /
• 제40권4호
• /
• pp.113-117
• /
• 2020

A series of Fe-P-B and Fe-Si-B amorphous alloys with high Fe contents exceeding 90 wt.% was successfully prepared by combining flux treatment and melt-spinning technique. The effects of Fe content and the flux treatment on the thermal and magnetic properties of amorphous alloys were studied. The glass-forming ability and the thermal stability of amorphous ribbons can be improved by a flux treatment, revealing the effective removal of heterogeneous nucleation sites in the ribbons through the flux treatment. It was found that Fe-Si-B ribbons exhibit higher saturation magnetization levels than Fe-P-B ribbons.

• 한국자기학회지
• /
• 제25권1호
• /
• pp.1-3
• /
• 2015

본 연구에서는 스핀-궤도 돌림힘의 광학적 측정 방법을 개발하였다. 사인파 전류에 의해 발생하는 스핀-궤도 돌림힘은 해당 주파수와 두 배 주파수로 진동하는 자화의 운동을 유발하는데, 이로 인해 변화하는 자화의 수직 성분을 극광자기 효과를 이용해 측정하였다. 스핀-궤도 돌림힘이 추가된 란다우-리프쉬츠-길버트 방정식의 평형 조건으로부터, 스핀-궤도 돌림힘에 의한 유효 자기장을 정량적으로 분석하였다. 이러한 측정법을 Pd/Co/Pt 박막 시료에 적용하여, 스핀-궤도 돌림힘 효율의 종 방향과 횡 방향의 성분 값을 각각 나누어 측정하는데 성공하였다. 본 연구에서 제시한 측정 및 분석 방법은 기존의 전기적 측정에 비해 오류가 적기 때문에, 스핀-궤도 돌림힘을 측정하는 더 개선된 방법으로 사용할 수 있다.

• Advances in nano research
• /
• 제1권4호
• /
• pp.183-192
• /
• 2013

One-dimensional multiferroic nanostructured composites have drawn increasing interest as they show tremendous potential for multifunctional devices and applications. Herein, we report the synthesis, structural and dielectric characterization of barium titanate ($BaTiO_3$)-bismuth ferrite ($BiFeO_3$) composite fibers that were obtained using a novel sol-gel based electrospinning technique. The microstructure of the fibers was investigated using scanning electron microscopy and transmission electron microscopy. The fibers had an average diameter of 120 nm and were composed of nanoparticles. X-ray diffraction (XRD) study of the composite fibers demonstrated that the fibers are composed of perovskite cubic $BaTiO_3$-$BiFeO_3$ crystallites. The magnetic hysteresis loops of the resultant fibers demonstrated that the fibers were ferromagnetic with magnetic coercivity of 1500 Oe and saturation magnetization of 1.55 emu/g at room temperature (300 K). Additionally, the dielectric response of the composite fibers was characterized as a function of frequency. Their dielectric permittivity was found to be 140 and their dielectric loss was low in the frequency range from 1000 Hz to $10^7$ Hz.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
• /
• pp.239-239
• /
• 2003

As a result of the recent miniaturization and enhancement in the performance of thin film inductors and thin film transformers, there are increased demands for the thin films with a high magnetic permeability in the high frequency range, a high saturation magnetization, a high electrical resistivity, and a low coercive force. In order to improve high frequency properties, we will investigate anisotropy field by shape and size of pattern. The Fe-Al-O thin films of 16mm diameter and 1$\mu\textrm{m}$ thickness were deposited on Si wafer, using RE magnetron reactive sputtering technique with the mixture of argon and oxygen gases. The fabricating conditions are obtained in the working partial pressure of 2m Torr, O$_2$ partial Pressure of 5%, Input power of 400w, and Al pellets on an Fe disk with purity of 99.9%. For continuous thin film is the 4Ms of 19.4kG, H$\sub$c/ of 0.6Oe, H$\sub$k/ of 6.0Oe and effective permeability of 2500 up to 100MHz. In this work, we expect to enhanced effect of magnetic anisotropy on patterned of Fe-Al-O thin films.

• 전기학회논문지
• /
• 제56권1호
• /
• pp.57-65
• /
• 2007

Along with the development of power electronics and magnetic materials, permanent magnet (PM) brushless direct current (BLDC) motors are now widely used in many fields of modern industry BLDC motors have many advantages such as high efficiency, large peak torque, easy control of speed, and reliable working characteristics. However, Compared with the other electric motors without a PM, BLDC motors with a PM have inherent cogging torque. It is often a principle source of vibration, noise and difficulty of control in BLDC motors. Cogging torque which is produced by the interaction of the rotor magnetic flux and angular variation in the stator magnetic reluctance can be reduced by sinusoidal air-gap flux density waveform due to reduction of variation of magnetic reluctance. Therefore, this paper will present a design method of magnetizing system for reduction of cogging torque and low manufacturing cost of BLDC motor with isotropic bonded neodynium-iron-boron (Nd-Fe-B) magnets in ring type by sinusoidal air-gap flux density distribution. An analytical technique of magnetization makes use of two-dimensional finite element method (2-D FEM) and Preisach model that expresses the hysteresis phenomenon of magnetic materials in order for accurate calculation. In addition, For optimum design of magnetizing fixture, Factorial design which is one of the design of experiments (DOE) is used.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1999년도 PROCEEDINGS OF 99 INTERNATIONAL CONFERENCE OF THE KACG AND 6TH KOREA·JAPAN EMG SYMPOSIUM (ELECTRONIC MATERIALS GROWTH SYMPOSIUM), HANYANG UNIVERSITY, SEOUL, 06월 09일 JUNE 1999
• /
• pp.389-402
• /
• 1999

Single crystal of Li2Cu1-xMxO4 (M=Ni, Zn) are promising as a substrate to realize superconducting electronic devices. The distribution coefficients of Ni and Zn to the Cu site in La2CuO4 (LCO) were estimated by the zone melting technique to grow high quality single crystals of La2Cu1-xMxO4(M=Ni, Zn). The distribution coefficient value of Ni was estimated to be 4.2 and that of Zn was estimated to be 0.66, respectively. Suitable solvent compositions were determined using these values to grow single crystals by he traveling floating zone (TSFZ) method. Single crystal of LCO, La2Cu1-xMxO4(M=Ni(x=0.01, 0.02, 0.03, 0.04), Zn(x=0.01, 0.02, 0.03) of high homogeneity were grown. The behaviors of the magnetization of these as-grown crystals do not indicate superconductivity except LCO. Ni or Zn substitution can make LCO non superconductor. This fact suggest that single crystals substituted by Ni or Zn are useful as substrate crystals.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2003년도 하계학술연구발표회 및 한.일 공동심포지엄
• /
• pp.260-261
• /
• 2003

It is recognized that the magnetization reverses with a sequence of discrete and jerky jumps, known as the Barkhausen effect. Recently, interest in the Barkhausen effect has grown as it is a good example of dynamical critical behavior, evidenced by experimental observation of a power law distribution of the Barkhausen jump size. So far, most experimental studies have been carried out on bulk samples using a classical inductive technique, which is difficult to apply to thin film samples mainly due to the ]ow signal intensity. For this reason, very few experiments have been done on two-dimensional ferromagnetic thin films. In this talk, we report a direct domain observation of Barkhausen avalanche at criticality in Co and MnAs thin films investigated by means of a magnetooptical microscope magnetometer (MOMM), capable of time-resolved domain observation with an image grabbing rate of 30 frames/s in real time. In Fig. 1, we demonstrate a series of six representative domain-evolution patterns of 25-nm Co film observed successively by means of the MOMM, where one can directly witness Barkhausen avalanche.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.808-809
• /
• 2008

22.9kV 50MVA HTS power cable has been developed and tested by Korea Electrotechnology Research Institute and LS Cable Company and it was supported by a grant from Center for Applied Superconductivity Technology of the 21st Century Frontier R&D Program. In this paper, DC Ic of 100m HTS cable which is installed at Kochang testing station was measured and analyzed. A measurement technique of DC Ic used by resistance and inductance removal method is established. The HTS power cable is composed of 2 layers for transmission and 1 layer for shield. For the analysis of AC losses in an HTS power cable, 2-dimensional numerical calculation was carried out to define the magnetic field distribution. We calculated the magnetization losses in the HTS core of that cable from these fields. These calculated results are in accordance with those of experiment.

• 한국지능시스템학회:학술대회논문집
• /
• 한국지능시스템학회 2008년도 춘계학술대회 학술발표회 논문집
• /
• pp.205-208
• /
• 2008

이 논문은 파이프의 결함을 진단하기 위해서 파이프에 유도 비틀림파를 가진하고 수신하는 개선된 방법을 제시한다. 기존에 니켈 스트립을 파이프에 부착하고 잔류자계를 이용한 Mode 선택 가진 방법에서 나타난 잔류자계의 정량화 문제점, 다른 모드가 동시에 가진되는 문제점 등을 해결하기 위해서 새로운 형태의 Crossed Coils센서를 제안한다. 제안된 센서를 통해 모드 선택이 가능함을 확인하였고, 차후 모드분석을 통하여 Torsional Mode의 최적 가진 조건을 찾을 수 있음을 보인다.

• Progress in Superconductivity
• /
• 제3권1호
• /
• pp.45-48
• /
• 2001

We have fabricated $MgB_2$thin films on (1 1 02)$ A1_2$$O_3$substrates by using a two-step method. Amorphous B thin films were deposited by a pulsed laser deposition technique and sintered in Mg vapor at various temperatures from 800 to $950^{\circ}C$. Superconducting properties of the thin films were investigated by temperature dependences of magnetization and critical current density. Structural studies were carried out by an x-ray diffraction and a scanning electron microscope. The films fabricated at $900^{\circ}C$ showed the highest transition temperature of 39 K and critical current density of ~$10^{7}$ A/$\textrm{cm}^2$ at 15 K.