• 자원환경지질
• /
• 제52권3호
• /
• pp.213-221
• /
• 2019

우강 호상철광상은 북중국 남쪽 끝 부분의 타이후아 복합체에 위치 하고 있다. 본 연구에서는 우강 호상철광상에서 산출되는 철광석 시료의 전암 분석 결과의 해석을 통하여 우강 호상철광상의 유형과 성인을 이해하고자 하였다. 이 광상의 철광석의 조직은 밴딩 구조가 약하게 나타나는 것과, 밴딩 구조가 나타나지 않는 것 두 가지로 분류할 수 있다. 주요 구성 광물들은 조립질의 자철석, 석영, 휘석, 각섬석 등이다. 지구화학적 연구 결과 우강 호상철광상은 해수와 0.1~1 %를 차지하는 열수로부터 철을 공급받아 형성 되었다. 또한 이 과정에서 육지성 물질로부터의 철 공급이 있었음을 확인하였다. 이전 연구 결과와 종합해 보았을 때, 대부분의 철광석에서 Ce 이상치는 뚜렷하게 나타나지 않지만 일부 철광석에서는 음의 Ce 이상치를 보였다. 이러한 결과는 우강 호상철광상은 환원 환경이 우세한 해양 환경에서 형성되었지만, 상대적으로 산화된 해양의 표층 환경의 가능성을 제시해 준다. 이러한 지구 화학적 특징을 바탕으로 우강 호상철광상이 형성된 지구조적인 환경은 대륙붕 연안이나 후열도 분지환경이라 생각된다. 또한 우강 호상철광상은 혼성암, 각섬석 편마암, 규암, 대리암이 함께 산출되는데, 이는 연구 광상이 화산 활동과 밀접한 연관성이 없음을 지시한다. 본 연구에서는 지금까지 보고된 지구화학적 분석 결과와 이번 연구 결과를 종합해 우강 호상철광상이 슈피리어 유형 호상철광상의 특징을 보임을 확인하였다.

• 열처리공학회지
• /
• 제14권2호
• /
• pp.103-109
• /
• 2001

Plasma nitrocarburising and post oxidation were performed on SM45C steel using a plasma nitriding unit. Nitrocarburising was carried out with various methane gas compositions with 4 torr gas pressure at $570^{\circ}C$ for 3 hours and post oxidation was carried out with 100% oxygen gas atmosphere with 4 torr at different temperatures for various times. It was found that the compound layer produced by plasma nitrocarburising consisted of predominantly ${\varepsilon}-Fe_{2-3}(N,C)$ and a small proportion of ${\gamma}-Fe_4(N,C)$. With increasing methane content in the gas mixture, ${\varepsilon}$ phase compound layer was favoured. In addition, when the methane content was further increased, cementite was observed in the compound layer. The very thin oxide layer on top of the compound layer was obtained by post oxidation. The formation of Oxide phase was initially started from the magnetite($Fe_3O_4$) and with increasing oxidation time, the oxide phase was increased. With increasing oxidation temperature, oxide phase was increased. However the oxide layer was split from the compound layer at high temperature. Corrosion resistance was slightly influenced by oxidation times and temperatures.

• 한국광물학회지
• /
• 제10권2호
• /
• pp.126-138
• /
• 1997

Serpentinite of the Yesan-Gongju-Cheongyang area has been formed by serpentinization of ultramafic rocks. The ultramafic rock might be composed mainly of oilvine with minor pyroxene and amphibole. Olivine has a considerably restricted chemical compositional ranging from Fo90 to Fo93. Fresh serpentinite containing large amount of oilvine is usually massive in occurrence and dark green to black in color. Serpentine minerals occur not only as major mineral of serpentinite, but also as remnants in the talc ore which was formed from serpentinite. XRD study indicates that antigorie is the most abundant serpentine mineral of the serpentinite. Serpentinite consisting of antigorite usually shows non-pseudomorphic texture, whereas that consisting of lizardite shows pseudomorphic texture. Antigorite is found along the margins or fractures of olivine grains resulting in the formation of network of magnetite which was formed at the time of serpentinization. Lizardite, subordinate constituent mineral of serpentinite, frequently shows pseudomorphic mesh-texture after olivine. The chemical differences between antigorite and lizardite/chrysotile are small, so both minerals are not easily discernible with the electron microprobe. Antigorite occuers as elongate blades, flakes, or plates forming interpenetrating texture to obliterate previous textures. SEM study also shows that most serpentine minerals occur in platy or tabular form rather than in asbestiform. Fractures formed after main serpentinization are observed within the pseudomorphic central olivine grain. Careful observation of the serpentine pseudomorphs gives a great deal of data on the pre-serpentinization nature of the serpentine pseudomorphs gives a great deal of data on the pre-serpentinization nature of the ultramafic rocks. It is inferred that the serpentinization took place after the emplacement of ultramafic body into the relatively wet environment ceased and the cooling intrusive body crossed into the stability field of serpentine. It is inferred that the final pervasive serpentinization took place over a long time, by hydrothermal water supplied through the fracture system produced during emplacement of ultramafic rock.

• 자원환경지질
• /
• 제6권3호
• /
• pp.133-170
• /
• 1973

The metamorphosed belt on cherty and andesitic rocks of the Gyeongnam province area has been well known as the most important copper matallogenetic province in Korea and locally has been investigated by several geologists. This report is summarized about geology, occurrence of ore deposits, the study of the present status of mine developments and exploitations and the suggestions of future proposed of copper mine developments and harmoniously and reseonably planning of demands and supply of copper ore. For convenience of study the writer divided the survey region as 4 areas, according to the conditions of mine location. They are (1) Goseong copper area (2) Gunbuk-Haman copper area (3) Masan-Changwon copper area (4) Tongrae-Ilgwang copper area. The geology of the above 4 areas consits of Cretaceous Gyongsang System, which is divided into Silla series, Nakdong Series and Bulguksa Series. The former has intrusive and extrusive andesite and sedimentary formation, and the latter has dioritic and hornblende granite. Ore deposits which is mostly vein types are confined mostly in the andesite and cherty rocks of Silla and Nakdong Series. It is observed slight hydrothermal alteration, i. e. propylitization, chloritization, saussuritization and silicification. It seems that the ore was formed by hydrothermal solution and secondary enrichement. The ore minerals are mainly chalcopyrite and pyrite, with small amounts of malachite, azurite, chalcocite, cuprite, galena, and sphalerite, magnetite, tetrahedrite and etc.. The efficient plan of copper mine developments in surveyed region are as following; (a) Gyeongnam Copper districts are divided in 4 area as mentioned above. (b) Each area would be likely developed as group-working as one unit. For the sufficiently supplying a demand of electric copper, the importations of high grade copper ore in foreign country are invitable at present status of copper mine developments and exploitations.

• Environmental Engineering Research
• /
• 제16권4호
• /
• pp.187-203
• /
• 2011

Chlorophenols (CPs) are widely used industrial chemicals that have been identified as being toxic to both humans and the environment. Zero valent iron (ZVI) and iron based bimetallic systems have the potential to efficiently dechlorinate CPs. This paper reviews the research conducted in this area over the past decade, with emphasis on the processes and mechanisms for the removal of CPs, as well as the characterization and role of the iron oxides formed on the ZVI surface. The removal of dissolved CPs in iron-water systems occurs via dechlorination, sorption and co-precipitation. Although ZVI has been commonly used for the dechlorination of CPs, its long term reactivity is limited due to surface passivation over time. However, iron based bimetallic systems are an effective alternative for overcoming this limitation. Bimetallic systems prepared by physically mixing ZVI and the catalyst or through reductive deposition of a catalyst onto ZVI have been shown to display superior performance over unmodified ZVI. Nonetheless, the efficiency and rate of hydrodechlorination of CPs by bimetals depend on the type of metal combinations used, properties of the metals and characteristics of the target CP. The presence and formation of various iron oxides can affect the reactivities of ZVI and bimetals. Oxides, such as green rust and magnetite, facilitate the dechlorination of CPs by ZVI and bimetals, while oxide films, such as hematite, maghemite, lepidocrocite and goethite, passivate the iron surface and hinder the dechlorination reaction. Key environmental parameters, such as solution pH, presence of dissolved oxygen and dissolved co-contaminants, exert significant impacts on the rate and extent of CP dechlorination by ZVI and bimetals.

• Corrosion Science and Technology
• /
• 제19권3호
• /
• pp.122-130
• /
• 2020

In this study, a corrosion failure analysis of a heat transport pipe was conducted, as the result of a pinhole leak. Interestingly, the corrosion damage occurred externally in the pipeline, resulting in severe thickness reduction near the seam line. Also, while a stable magnetite protective film formed on the inner surface, the manganese oxide formation occurred only on the outer surface. The interior and exterior of the pipe were composed of ferrite and pearlite. The large manganese sulfide and alumina inclusions were found near the seam line. In addition, the manganese sulfide inclusions resulted in grooving corrosion, which progressed in the seam line leading to the reduction in the thickness, followed by the exposure of the alumina in the matrix to the outer surface. To note, the corrosion was accelerated by pits generated from the boundaries separating the inclusions from the matrix, which resulted in pinhole leaks and water loss.

• Geosciences Journal
• /
• 제22권6호
• /
• pp.921-938
• /
• 2018

The Motzfeldt intrusions in the Gardar Province, southern Greenland, split into syenitic plutonic and hypabyssal rocks, in which the latter include ring dykes and sheet intrusions. Sheet intrusions, considered as the source for rare earth elements (REE) and high field strength elements (HFSE), comprise sheets of peralkaline microsyenite (SPM), syenitic pegmatite (SP), and peralkaline microsyenite (PM). SP exhibits extremely high concentrations of REE and HFSE, which are positively correlated with increasing alkalinity from early towards late intrusion, caused by magmatic processes. In contrast, some of the SPM and PM are also significantly enriched in REE and HFSE, caused by post-magmatic fluids. The REE- and HFSE-rich phases in SP consist mainly of zircon and allanite with smaller amounts of pyrochlore in pseudomorph from the inferred eudialyte, whereas some of the PM and SPM consist of pyrochlore, REE-carbonate, and zircon in the matrix. The zircon grains in the Motzfeldt Sø Formation (MSF) syenite occur in interstitial spaces, exhibiting an association with magnetite and a bipyramidal form in texture. They are characterized by a highly fractured and embayed rim. Zircons from PM and SP are clearly enriched in Fe, Al, Ca, Na, Y, P, Hf, Y, P, Nb, Ta, and REE, and are depleted in Zr and Si in comparison with magmatic zircon. They also show a clear trend of higher LREE/HREE and $Eu/Eu^{\star}$ ratios, and lower $Ce/Ce^{\star}$ ratios, which define them as typical hydrothermal zircons. In contrast, zircons from the MSF syenite show a relatively lower LREE/HREE ratio and Eu and Ce anomalies of a similar magnitude compared with those from SP and PM. The occurrence and mineral composition of the zircon suggest that post-magmatic fluids have played an important role in the remobilization of REE and HFSE as well as the primary concentration of REE and HFSE, caused by magmatic processes.

• 한국광물학회지
• /
• 제31권2호
• /
• pp.87-101
• /
• 2018

만장광상은 옥천변성대 화전리층 내에 발달되었으며 열극충전형 동광체인 중앙 및 본광체와 철 스카른형 서부광체로 대분된다. 본 연구에서는 중앙 및 본광체에 대한 광상학적 연구를 수행하여 기존 서부광체 광화작용 특성과 비교하고자 한다. 중앙광체는 맥상조직이 두드러지며 자류철석과 황동석이 주를 이루는 반면, 본광체는 맥상, 괴상, 각력상 조직과 더불어 황철석, 유비철석, 황동석이 주로 산출된다. 이 밖에 섬아연석, 방연석, 자철석, 티탄철석, 금홍석, 석석, 철망간중석, 황석석 등이 수반된다. 스카른이 부분적으로 발달하며 석류석은 그로슐라 계열, 휘석은 헤덴버자이트 계열이 우세한 것으로 보아 대체로 환원환경에서 정출된 것으로 보인다. 중앙광체의 섬아연석-황석석과 본광체의 황철석-유비철석 광물공생군을 이용한 생성온도는 각각 $204-263^{\circ}C$, $383-415^{\circ}C$로서 중앙광체가 상대적으로 낮고, 황분압도 본광체에서 $10^{-6}-10^{-7}atm$로서 비교적 높고 중앙광체로 가면서 점차 감소한 것으로 보인다. 황화광물의 황동위원소조성은 중앙광체 4.6-7.9‰, 본광체 4.3-7.0‰로 상호 유사하며 주로 화성기원이지만 모암의 영향으로 약간 높게 나타난다. 광석광물의 종류와 조직 그리고 광화작용의 물리화학적 조건을 고려할 때 동광화작용이 발달한 본광체와 중앙광체는 잠두화성암에 대하여 각각 근지성과 원지성 광화작용의 특성을 나타낸 것으로 보이며, 스카른 철광상이 발달한 서부광체와는 서로 다른 열수계의 영향을 받아 생성된 것으로 여겨진다.

• 자원환경지질
• /
• 제28권3호
• /
• pp.185-197
• /
• 1995

충주 광산 지역은 계명산층과 이를 관입한 중생대 화강암질 암석으로 구성되며, 이들 화강암질 암석중 백악기초(134 Ma) 흑운모 화강암과 계명산층을 구성하는 석영-운모 편암의 접촉부에서 회중석을 수반하는 스카른 광상이 산출된다. 스카른은 구성광물의 공생 특성과 주 구성광물의 양적인 비에 의해 석류석 스카른대, 규회석 스카른대, 녹염석 스카른대 및 녹니삭 스카른대로 분류된다. 석류석의 화학조성은 초기 순수한 안드라다이트 (>Ad96)에서 후기 알루미늄 함량비가 증가하는 안드라다이트-그라슈라(Ad~50)로 점이적인 변화를 나타내며, 녹염석은 $Fe^{3+}$ 의 함량비가 높은 고용체 상(Ps=35)에서 암루미늄 함량비가 높은 고용체 상(Ps=25)으로 변화하는 양상을 띤다. 광물 공생 및 화학 조성상의 특징으로 볼 때 스카른화 작용은 Ca와 Fe의 활동도가 흑운모 화강암의 접촉부에서 높고 Al, Mg, K 및 Si 활동도는 석영-운모 편암내에 발달되는 스카른에서 증가하는 경향을 나타낸다. 녹염석 스카른대에서 산출되는 회중석의 유체포유물 균질화 온도는 $300{\sim}380^{\circ}C$ 이며 NaCl 상당 염농도는 3-8wt. %로, 석영 및 녹염석 유세포유물 균질화 온도는 $300{\sim}400^{\circ}C$이다. 후기 녹니석 스카른대내에서 수반되는 황화광물의 황 동위원소비는(${\delta}^{34}S$) 황철석 $9.13{\sim}9.51%_{\circ}$, 방연석 $5.85{\sim}5.96%_{\circ}$이며, 공존하는 황철석-방연석 광물쌍에 의한 동위 원소 지질온도는 $283{\pm}20^{\circ}C$이다. 이산화탄소 몰분율($X_{CO_2}$)은 $L-CO_2$가 관찰되지 않으며 $H_2O$ 풍부한 유체포유물로 구성되고 있는점과, 안드라다이트 및 규회석의 광물공생 특성과 대비하여 볼때 약 0.01로 추정된다. 광물공생 및 화학조성, 상 안정 관계, 유체포유물 연구, 동위원소 지질온도계등의 연구 결과에 의해 충주광산 지역 스카른화 작용은 $400{\sim}260^{\circ}C$ 온도 조건과 산소분압이 감소($fo_2=10^{-30}{\sim}10^{-25}$)하는 환경에서 진행되었으며, 텅스텐 광화작용은 이러한 스카른 형성 과정 중 온도의 감소($350^{\circ}C$)와 산소분압이 감소($fo_2=10^{-27}$) 하는 조건에서 수반되었다.

• 자원환경지질
• /
• 제26권3호
• /
• pp.311-325
• /
• 1993

The Ohto and Tohyun copper mine which are located 4 km southeast of Euiseong, Gyeongsangbukdo, Republic of Korea show various common geologic and mineralogic features. Both copper deposits are of hydrothermal-vein types, and associated with fracture system developed during formation of the Geumseong-san caldera in late Cretaceous age. According to structures and mineral assemblages, the mineralization processes have progressed in four stages: three hypogene mineralization stages and one supergene stage. Three hypogene stages are 1) stage I forming $N5{\sim}20^{\circ}E$ veins in the Ohto mine, 2) stage II building $N5^{\circ}W{\sim}N5^{\circ}E$ veins in the Tohyun mine, and 3) stage ill bringing $N80^{\circ}E$ veins which crosscut veins of the stage II. The vein ores consist mainly of pyrite, arsenopyrite, galena and chalcopyrite, minor or trace amounts of magnetite, hematite, pyrrhotite, stannite, bournonite, boulangerite, stibnite, galenobismutite, native bismuth, marcasite, geothite and malachite. The main gangue minerals are quartz and calcite. Wallrock is altered by sericitization, chloritization, pyritization, carbonitization and argillization. Arsenic and copper contents in arsenopyrite increase from stage I to stage III (from 31.28 to 33043 atom.% As) and (from 0.04 to 0040 atom.% Co). Going from stage I to stage III Fe and Mn contents in sphalerite decreases from 12.56 to 0.44 wt.% and from 0.24 to 0.01 wt.%, respectively. The compositional data of arsenopyrite in the early stage I indicate a temperature of $420{\sim}365^{\circ}C$ and sulfur fugacity of $10^{-6.5}{\sim}10^{-8.3}$ atm. Chalcopyrite and pyrrhotite assemblage suggest that Middle stage I was deposited at below $334^{\circ}C$. The compositional data of arsenopyrite in early stage II suggest a temperature range of $425{\sim}390^{\circ}C$ and sulfur fugacity codition of $10^{-6.4}{\sim}10^{-7.3}$ atm. Based on fluid inclusion the Middle stage II was regarded as to be deposited at $420{\sim}337^{\circ}C$ (Chi et al., 1989). Referring composition of sphalerite and stannite middle-late stage II seem to be deposited around $246^{\circ}C$ and $10^{-16.5}$ atm. sulfur fugacity. The ${\delta}^{34}S$ values of sulfide minerals in the Stage I, II, III range from 4.9 to 7.6%0 and indicate igneous ore fluid origin. Based on differences in mineral assemblages, chemical composition and chemical environments of Ohto and Tohyun mine its mineralization are considered to be formed at diffent mineralization ages and by different ore fluids.