• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.2
• /
• pp.200-206
• /
• 2014

This paper describes magnetically levitated vehicle with hybrid magnets, which have been studied by the authors in place of streetcars or conveyance system. An experimental vehicle of 20kg was magnetically levitated by using a small number of dry-cell batteries, which consisted of 10 Ni-MH cells of 1900mAh in series. The magnets were activated sequentially, because the internal resistance of the batteries suppressed the maximum current. The vehicle was kept levitating for about 2 hours and was stable against disturbance due to instantaneous external force. In this paper, dynamic characteristics of the magnetically levitated vehicle using a small number of dry cell batteries are presented.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.722-726
• /
• 2007

In this paper we deal with a design of the integral sliding mode controller to suppress the disturbance force acting on the suspension system of the magnetically levitated train system. One of the important factors that cause the disturbance force acting on the suspension system comes from the low propulsion speed of linear induction motor. In this paper integral sliding mode controller is employed to reject the disturbance force produced by the propulsion system of the linear induction motor. In order to show the effectiveness of the designed controller a dynamic simulation is utilized and the sliding mode controller without integral compensator is compared with the proposed integral sliding mode controller to suppress the disturbance force.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1134-1135
• /
• 2006

In this paper, dynamic simulation results for magnetically-levitated vehicles are resented. The dynamic equation and models for a half-bogie system are derived. The system includes primary suspension system, magnet module, spring-damper system and cabin. Also, the dynamic characteristics for the derived models are analysed. Using the results, levitation control algorithm can be designed to meet the performance requirements.

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.34-36
• /
• 2005

In this paper, dynamic simulation results for magnetically-levitated vehicles are presented. The dynamic equations and models for a half-bogie system are derived. They include primary suspension system, module, secondary suspension and cabin. Also, the dynamic characteristics for the derived models are analysed.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1553-1555
• /
• 2005

This paper presents a design of lossless hybrid-type magnetically-levitated vehicle. The lossless hybrid-type system is implemented by a permanent magnet and electromagnet. The target plant consists of eight hybrid-type magnets and in the steady-state, no current is needed to support the load. The design procedure is described and the results of this work are shown.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.12
• /
• pp.2196-2208
• /
• 1997

In this work, a magnetic levitation (maglev) system is developed to transport a wafer between semiconductor fabrication process modules in clean rooms to take advantages of eliminating particle and oil contamination that normally exist in conventional transport systems due to contact motion of mechanical components. A main feature of the maglev system developed in this work is that a controller and power supplying part are not mounted on the moving carrier but on the stationary track, which is defined a controller-free carrier, to reduce carrier's weight. Iron-core electromagnets and irons are used for levitation, and air-core electromagnets and permanent magnets are used for stabilization. Analysis, design, and modeling of the magnetically levitated transport system are presented. The performance of the maglev system is experimentally demonstrated.

• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.95-98
• /
• 1998

Applying the magnetically levitated transportation system, which is noncontact bearing system, to solve the problems such as transformation of original form or flaw of iron plate caused by transportation of thin iron plate which required high quality as body of motor vehicle, materials of electronic devices etc.. Magnetic saturation phenomena caused by thickness of iron plate and gap size between magnets. In case of iron plate, the vibration mode will be considered since vibration occurs during transportation. In order to solve the problems caused by vibration, choose the levitation system method using numbers of magnet, magnetic saturation for thickness and length of iron plate with parameters in location and gap of magnet. In this paper, we will suggest the whole design technique of magnetically levitated transportation system, namely method of magnetic attraction and transportation system

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.364-371
• /
• 2008

In general Maglev (magnetically levitated vehicle) has about 4 or 5 bogies per one vehicle to improve stability of electromagnetic suspension and 4 air-spring per one bogie are to be equipped to prevent form excessive yawing and pitching motion of bogie. 3 leveling valve per one vehcile will be applied to control the height of carbody. This kind of vehicle is on the design stage, and design review will be carried out before manufacture. The suspension system of Maglev consists of 16 of air-spring, auxiliray reservoir and orifice, 3 leveling valve, which are different composition comparative to conventional rolling stock. To improve operational reliability of vehicle, additional ventilation valve will be equipped with airspring. This kind of new design concept requires fundamental design review. In this study, suspension systems of Maglev will be built as mathematical model. Then designed suspension system will be reviewed in view of various points through proposed suspension simulation.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.12
• /
• pp.1152-1160
• /
• 2007

In this paper we deal with a design of integral sliding mode controller to reject the disturbance force acting on the suspension system in the magnetically levitated system which is propelled by the linear induction motor. The control scheme comprises an integral controller which is designed for achieving zero steady-state error under step disturbances, and a sliding mode controller which is designed for enhancing robustness under plant uncertainties. A proper continuous design signal is introduced to overcome the chattering problem. The disturbance force produced by the linear motor is formularized by using a curve fitting of the experimental raw data. Computer simulations show the effectiveness of the designed integral sliding mode controller to reject the disturbance force.

• Proceedings of the KIEE Conference
• /
• 2004.04a
• /
• pp.256-258
• /
• 2004

It is not easy to apply new algorithm to the vehicle under driving test because the principle and moving characteristic of Magnetically Levitated Train(Maglev) developed in KIMM have been not easily analyzed yet. So, in this paper the small-scaled Maglev which can experiment economically and analyze moving-characteristic is proposed. Proposed small-scaled Maglev have the same principle and function as that of Maglev but it is smaller than real system at the ration of 1 to 7.