• Journal of the Korean Magnetics Society
• /
• v.18 no.5
• /
• pp.185-189
• /
• 2008

We observe the change of coercivity and exchange bias, depending on inserting material and thickness in a [Pd(0.6 nm)/$Co(0.2)]_5$/ FeMn(10) multilayer structure with perpendicular anisotropy. When 0.78 and 1.28 nm thick NiFe substitutes for Co in a $[Pd(0.6 nm)Co(0.2)]_4$/Pd(0.6)/NiFe(t)/FeMn(10) structure, we obtain the exchange bias of 360 Oe. In addition, when $Co_8Fe_2$ and $Co_9Fe_1$ are inserted for Co/FeMn interface, we obtain the exchange bias of 380 nm for a 0.68 nm thick $Co_8Fe_2$ and 580 Oe for a 0.52 nm thick $Co_9Fe_1$.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2007.05a
• /
• pp.157.2-157.2
• /
• 2007

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.170-171
• /
• 2009

• Proceedings of the KSMRM Conference
• /
• 2003.10a
• /
• pp.75-75
• /
• 2003

목적： MR 영상에 나타나는 bias field, 즉 영상의 특정 부분이 주위보다 어둡거나 밝게 나타나는 현상을 보다 균일하게 보정시키는 방법으로 제시된 N3 방법에서 Gaussian kernel을 사용한 smoothing 방법 대신에 Wavelet(Daubechies, D4)함수를 smoothing기법으로 사용했을 때 어느 정도 균일함에 향상이 일어나는지를 알아보는 것이다.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.6
• /
• pp.83-90
• /
• 2003

This paper presents an underwater hybrid navigation system for a semi-autonomous underwater vehicle (SAUV). The navigation system consists of an inertial measurement unit (IMU), and a Doppler velocity log (DVL), accompanied by a magnetic compass. The errors of inertial measurement units increase with time, due to the bias errors of gyros and accelerometers. A navigational system model is derived, to include the scale effect and bias errors of the DVL, of which the state equation composed of the navigation states and sensor parameters is 20. The conventional extended Kalman filter was used to propagate the error covariance, update the measurement errors, and correct the state equation when the measurements are available. Simulation was performed with the 6-d.o,f equations of motion of SAUV, using a lawn-mowing survey mode. The hybrid underwater navigation system shows good tracking performance, by updating the error covariance and correcting the system's states with the measurement errors from a DVL, a magnetic compass, and a depth sensor. The error of the estimated position still slowly drifts in the horizontal plane, about 3.5m for 500 seconds, which could be eliminated with the help of additional USBL information.

• Journal of Ocean Engineering and Technology
• /
• v.31 no.1
• /
• pp.28-35
• /
• 2017

This paper introduces a GPS-aided dead reckoning algorithm that asymptotically estimates the heading bias error of a magnetic compass based on geodetic north, improves the position error accumulated by dead reckoning, and helps the estimated position of an AUV to represent a position in the NED coordinate system, by receiving GPS position information when surfaced. Based on the results of a simulation, the locational error was bounded with a modest distance, after estimating the AUV position and heading bias error of the magnetic compass when surfaced. In other words, it was verified that proposed algorithm improves the position error in the NED coordinate system.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.9
• /
• pp.818-824
• /
• 2008

The Separated Pulsed Laser Deposition (SPLD) technique uses two chambers that are separated by a conic metallic wall with a central orifice. The pressures of ablation chamber and deposition chamber were controlled by the differential vacuum system. We deposited zinc oxide (ZnO) thin films by SPLD method to obtain high quality thin films. When the bias voltage of +500 V was applied between a substrate and an orifice, the ZnO thin film was deposited efficiently. The deposited ZnO thin film at ablation chamber gas pressure of Ar 5 mTorr showed the sharpest ultraviolet absorption edge indicatory the band gap of about 3.1 eV. ZnO thin films were deposited using effect of electric and magnetic fields in the SPLD method. E${\times}$B drift happened by an electric fields and a magnetic fields, activated plasma plume, as a result the film surface became very smooth. When the bias voltage of +500 V and magnet of 0,1 T were applied the ZnO thin films surface state showed high quality. Grain size was 41.99 nm and RMS was 0.84 nm.

• Journal of Magnetics
• /
• v.5 no.1
• /
• pp.19-22
• /
• 2000

The effects of a hard-biased Held on the magnetic and magnetoresistive properties of a crossed spin-valve head are investigated by computer simulation with particular emphasis on the asymmetry of the output signal. The spin-valve considered in this work is NiMn (25 nm)/NiFe (2.5 m)/Cu (3 nm)/NiFe (5.5 m), with a length of 1500 m and a width of 600 nm. A simple model is used where each magnetic layer consists of a single domain, and the magnetoresistance is a function of the angle between the magnetization directions of the two magnetic layers. The ideal crossed spin-valve structure is not realized with the present model and magnetic parameters, but the deviation from ideality is decreased by the hard-biased field. This results in the improvement of the linearity of the output signal with the use of the bias field. The magnetoresistance ratio and magnetoresistive sensitivity, however are reduced. The magnetic properties including the magnetoresistance are found to be strongly affected by magnetostatic interactions, particularly the inter-layer magnetostatic field.

• Journal of the Korean Magnetics Society
• /
• v.4 no.3
• /
• pp.239-243
• /
• 1994

$NiFe/TbCo/Si_3N_4$ thin films were fabricated, which can be employed as dualOongitudinal and transverse) biased magnetoresistive elements utilizing surface magnetic exchange at the interface of NiFe/TbCo films. When Tb area percent was 36 % and substrate bias was not applied, magnetic exchange fields of 100~180 Oe were obtained. The thicknesses of NiFe, TbCo and $Si_3N_4$(Protective layer) were $470\;{\AA},\;2400\;{\AA}\;and\;600\;{\AA}$, respectively. Magnetoresistance ratio of 1.45 % was obtained using NiFe films fabricated with 1000 W power and 2.5 mTorr of Ar pressure. The MR ratio of microstructured elements was reduced to 1.31 % and the MR response curves were shown not to saturate due to demagnetizing fields of the elements. When elements were fabricated with $36^{\circ}$ of misalignment with respect to the exchange field direction using films having 150 Oe exchange field, MR response curve was shifted by 85 Oe, and the operating point of the device shifted to the linear region of the response. Also, the Barkhausen noise was eiminated due to longitudinal bias field originating from the exchange field.

• Journal of the Korean Magnetics Society
• /
• v.14 no.1
• /
• pp.13-17
• /
• 2004

We have investigated the effect of Hf insertion in the Al oxide tunnel barrier on the properties of magnetic tunnel junctions (MTJs). MTJs with Hf inserted barrier show the higher tunnel magnetoresistance (TMR) ratio and less temperature and bias voltage dependence of TMR than MTJs with a conventional Al$_2$O$_3$ barrier. The enhancement of TMR ratio and the reduction of the temperature and bias voltage dependence might be due to the reduction of defects in the barrier. Al-Hf oxide was formed by depositing Al and Hf simultaneously, and oxidizing the compound films. The TMR ratio of 36% was almost the same value as that with Hf inserted barrier. This implies that the inserted Hf layers mixed with Al layers during deposition or oxidation, and they might form Al Hf oxide barriers. This compound Al Hf oxide formation may be responsible to reduction of defect concentration which enhanced the TMR ratio and reduced temperature and bias-voltage dependence.